Enot Mod

The Enot Mod (also called Enot's RSVP Mod) is a single-sided mod by Enot. It extends an RSVP body with a G3 cap and a layered grip-and-tip assembly.

Construction

Parts needed

• 1x Pentel RSVP (all parts)
• 3x Pentel Hybrid Gel Grip (three tips and one grip)
• 1x Pilot G3 (cap)
• 1x Pilot Super Grip (grip)

Text tutorial

1. Reverse the RSVP ink tube and reinstall it in the barrel.
2. Put one HGG tip into the RSVP cap.
3. Place the RSVP grip inside the cap.
4. Put two Super Grip rings onto the front of the RSVP barrel.
5. Place two HGG tips over the front end.
6. Fit the HGG grip over the front assembly.
7. Cut approximately 3 cm from the G3 cap and place it over the HGG grip.
8. Add the remaining Super Grip grip over the exposed space.