Badtzu Mx

Badtzu Mx is an MX-style mod by Badtzu.

Construction

Parts needed

• 1 Pilot BPS-GP grip
• 1 Bic Cristal body and ink tube
• 1 G1 tip, or a Uni-ball Signo tip as an alternative
• 1 RSVP, Mini RSVP or retractable RSVP (cap and grip)
• 1 empty ink cartridge
• 1 non-retractable Flexgrip body
• 3 spare grip pieces: 6 mm, 1 mm and a remaining piece for the Flexgrip front

Text tutorial

1. Put a 6 mm piece of spare grip on the tip end of the Flexgrip body.
2. Take an empty ink cartridge, cut off its small front end and wrap tape around that end. Insert the cartridge into the Flexgrip body.
3. Fit the RSVP grip over the cartridge. Put the small 1 mm grip piece inside the RSVP cap, then place the cap over the RSVP grip.
4. Cut the front of the Bic Cristal body to 2.6 cm. Wrap tape around its small end.
5. Put Patafix inside the G1 tip and attach the tip to the end of the Bic body.
6. Put the remaining spare grip piece at the front of the Flexgrip assembly.
7. Insert the Bic ink tube into the end of the Bic body to stop it moving, then cover the assembled Bic section with the BPS-GP grip.