Any-X

Any-X is a mod by Zaazu.

Construction

Parts needed

• Two SGM / Anyball / Profile donors (barrels, clickers, one grip and one spring)
• RSVP ink tube; two Pilot G2 clickers; Pentel HGG tip
• Tape; glue if needed for the G2 clicker connector
• A short ink-tube piece, possibly from an Anyball

Text tutorial

1. Cut the two donor barrels as shown below.

   

   Step 1.

   
   

2. Cut one G2 clicker as shown and use it as the connector; glue the join if needed.

   

   Step 2.

   
   

3. Cut the second G2 clicker section as shown. Cut the clicker part from one Anyball donor barrel, put it into that section, and screw the HGG tip over it.

   

   Step 3.

   
   

   

   Step 3.

   
   

4. Add the donor spring and RSVP ink tube. Wrap 3–4 cm of tape around the tube if you want the mod to be writable.

   

   Step 4.

   
   

5. Screw this assembly into the barrel. At the other end, add the short ink-tube piece, which appears to be from an Anyball, then screw on the remaining donor clicker and add the grip.

   

   Step 5.

   
   

   

   Step 5.