Watto DC

Watto DC is a double-sided mod created by Watto. It measures 20.7 cm and weighs 16.3 g.

Parts needed

• 2 Crayola Supertip barrels
• 2 Tombow Playcolor 2/K pens (one barrel and two backplugs)
• 2 Uni-ball Signo tips
• 3 Pilot G3 grips
• 2 Sailor Gel caps
• 2 Dong-A Anyball grips
• 2 Pentel ColorTwin large caps

Text tutorial

1. Disassemble both Playcolor pens and keep the backplugs. Cut one Playcolor barrel to 2.15 cm from its back.
2. Put the backplugs into the cut barrel piece with their tip ends facing outward.
3. Disassemble the Supertips and cut each barrel to 5.8 cm from the back. Join the Supertip barrels at their backs using the Playcolor assembly.
4. Hollow both ColorTwin caps. Push a G3 grip into each cap with its smooth side first, as far as it will go. Trim excess grip, remove it and refit it with the striped side first.
5. Put a Signo tip upside down into each cap; the G3 grip holds it in place.
6. Cut the Sailor Gel caps to 2.5 cm. Put one G3 grip block on each ColorTwin cap, followed by the cut Sailor cap. An insert may be placed under the Sailor cap.
7. Cut two six-block sections of G3 grip and place one over each cap assembly. Cover the exposed G3 grip with one or two Anyball blocks.
8. Repeat for the other side and attach both cap assemblies to the joined barrel.