Sister R Ballsign

Sister_R Ballsign is a double-capped mod by Sister_R, built around a Sakura Ballsign barrel and Dong-A Comssa caps.

Construction

Parts needed

• 1 Sakura Ballsign (barrel)
• 2 Dong-A Comssa caps
• 2 Pentel Hybrid Gel Roller tips
• 2 Pentel Hybrid Fine (HGG) grip sections
• 2 Ohto Needle-Point or Metallic Gel grip sections
• 2 Uni Lakubo grips
• Dong-A Anyball grip sections, about 10 blocks total
• An insert, if desired

Text tutorial

1. Remove the Ballsign back plug.
2. Fit a whole Lakubo grip over each Comssa cap, reversed so the cap tip protrudes through the grip.

   

3. Cut about 1.4 cm of HGG grip. Place it inside the Lakubo grip and seat a Hybrid Gel Roller tip in the HGG section.
4. Return the Lakubo grip to its original orientation.

   

5. Starting near the cap tip, add 6 mm of Needle-Point grip, 1 Anyball block, 7 mm of Needle-Point grip, and two 2-block Anyball sections. Keep the outermost Anyball section at the end of the cap.
6. Prepare the second cap the same way, then double-cap the Ballsign barrel. Add an insert if desired.