RSVP.Kt

RSVP.Kt is a capped mod by Myrddin, built with a Keityo barrel and RSVP cap. It measures 20.5 cm, weighs 18 g, and is easy to make.

Construction

Parts needed

• 1 Keityo pen (barrel and large cap)
• 1 RSVP pen (cap and grip)
• 1 Papermate Flexgrip Elite round tip
• 1 Dr. Grip tip
• Sailor Gel grip
• Blu-Tack and tape

Tutorial

1. Keep the large Keityo cap and barrel. Put the Sailor grip on the Keityo cap as on a Dr. KT mod, then fit the Dr. Grip tip at the top of the cap.
2. Cut 0.5cm from the RSVP grip. Wrap about 0.5cm of tape around the Keityo body tip and fit the cut RSVP grip over it.
3. Attach the Flexgrip clicker and tip with Blu-Tack. Wrap tape around the top of the Keityo tip before fitting the ink tip, then place the Flexgrip tip over it.
4. Press the RSVP cap, with the RSVP grip inside, onto the Keityo body so that about 3mm of the RSVP cap remains on the body.