Grip Maniac

Grip Maniac is a mod by Near, measuring 20.9 cm and weighing 16–17 g. It uses two inserts and combines a Flexgrip Ultra with two Bic Atlantis 1.2 pens.

Construction

Parts needed

• 1 Flexgrip Ultra barrel
• 2 Bic Atlantis 1.2 pens (bodies and grips)
• 2 inserts

Text tutorial

1. Remove the parts from the Flexgrip barrel. From its tip end, cut the barrel at 3.6 cm.
2. Remove a grip and ink tube from each Atlantis. Cut about half of each undergrip section, then cut off each rear plug. Take care when making these cuts.
3. Cut the Atlantis grips into rings.
4. Fit the grip rings over both ends of the mod, then fit the two prepared Atlantis bodies into the Flexgrip barrel.
5. Add the two inserts.