Akaize Bullet mod

Akaize Bullet mod is a heavy, double-ended mod by Akaize Tran.

Construction

Parts needed

• 1 STA Aquarelle barrel
• 1 Campus Highlighter MMHL-BL barrel (a second STA barrel can be used instead)
• 1 Dong-A Comssa barrel, cut into two connectors
• 2 bullet tips (heavy tips can be used instead)
• 1 silicone grip (a Dr. Grip grip works)
• 1 random grip for decoration

Text tutorial

1. Cut the single Comssa barrel into two pieces, each 3 cm long.
2. Clear the STA Aquarelle barrel.
3. Cut the Campus Highlighter barrel, or a second STA barrel, into two pieces, each 4.5 cm long.
4. Cut the silicone or Dr. Grip material to 2 cm.
5. Put one bullet or heavy tip into each short Campus/STA barrel section.
6. Fit the decorative grip pieces onto both short barrel sections, followed by the 2 cm silicone/Dr. Grip section.
7. Connect the two short barrels to the ends of the STA barrel using the two Comssa barrel pieces. Wrap tape around the joints if needed.