A13x Bullet Mod
From Fen Spinner Wiki
More actions
The A13x Bullet Mod was A13x's main mod during his 2013 era. A13x refers to it as "ABM."
The mod was made popular when A13x used it in Pen Spinning World Tournament 2013. This mod was originally created as a heavy version of a Black Bonkura KT. As of today, some parts of the mod remain a mystery (the tips in particular).
Construction
Parts needed
List from A13x's summary video[1]
- 2x Pilot Dr. Grip（Grip）
- 1x Old Giotto Turbo Maxi (body)
- 1x Old big Velleda White Board Marker (cap)
- 1x Old Papermate Super Magic + (Body)
- 1x Edding 661 (cap)
- 1x Pilot G2 (Grip)
- 1x ~1cm section of dimpled grip
- 2x ~0.5cm stripe of grips
- 1x ~0.7cm flat grip
- 2x Secret tips (one silver and one gold)
Additional Items
- Celo tape and electrical tape
Text tutorial
- Cut ~3.45 cm of the Velleda cap.
- Disassemble the old Giotto and cut the front until it is ~1 cm
- Cut ~4 cm of the old Super Magic+ body.
- Cut both of your Dr. Grip grips in half, keeping the flat side.
- Cut three sections of G2 grip: one with four stripes, one with two stripes, and one with one stripe.
- Put the golden secret tip inside the Edding cap (you may need to clear the interior beforehand).
- Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Dr. Grip grip.
- Add these grips on the Velleda cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of G2 grip, and the last flat side of Dr. Grip grip.
- Put the silver secret tip inside the Velleda cap.
- Add ~1 round of black electrical tape on the thinner side of the Super Magic+ body.
- Add 1 stripe of G2 grip on the front of the old Giotto, and add cello tape on the rest of the front.
- Put the thick side of the Super Magic+ body inside the back of the old Giotto barrel.
- Connect the Edding cap on the remaining Super Magic+.
- Connect the old Velleda cap on the front of the old Giotto barrel.