A13x Bullet Mod
From Fen Spinner Wiki
More actions
The A13x Bullet Mod is the main mod of A13x during his "2013" era. A13x himself calls it: "ABM”.
The mod was made popular when A13x used it in Pen Spinning World Tournament 2013. This mod was originally created as a heavy version of a Black Bonkura KT. As of today, some parts of the mod remain a mystery (the tips in particular).
Construction
Parts needed
List from A13x's sum up video[1]
- 2x Pilot Dr. Grip（Grip）
- 1x Old Giotto Turbo Maxi (Body)
- 1x Old big Velleda White Board Marker (cap)
- 1x Old Papermate Super Magic + (Body)
- 1x Edding 661 (cap)
- 1x Pilot G2 (Grip)
- 1x ~1cm section of dimpled grip
- 2x ~0.5cm stripe of grips
- 1x ~0.7cm flat grip
- 2x Secret tips (One silver color and one gold color)
Additional Items
- Celo tape and Electrical tape
Text tutorial
- Cut ~3.45 cm of the Velleda White Board Marker cap.
- Disassemble the old Giotto Turbo Maxi and cut the front until it's ~1cm
- Cut ~4 cm of the old Papermate Super Magic + body.
- Cut both of your Pilot Dr. Grip grips in half, keeping the flat side.
- Cut 3 sections of Pilot G2 grip, 1x 4 stripes, 1x 2 stripes, and 1x 1 stripe.
- Put the golden secret tip inside the Edding 661 cap (you may need to clear the interior beforehand).
- Add these grips on the Edding 661 following this order: 4 stripes of Pilot G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Pilot Dr. Grip grip.
- Add these grips on the Veleda White Board Marker cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of Pilot G2 grip, and the last flat side of Pilot Dr. Grip grip.
- Put the silver secret tip inside the Velleda White Board Marker cap.
- Add ~1 round of black electrical tape on the thinner side of the Papermate Super Magic + body.
- Add 1 stripe of Pilot G2 grip on the front of the old Giotto Turbo Maxi, and add cello tape on the rest of the front.
- Put the thick side of the Papermate Super Magic + body inside the back of the old Giotto Turbo Maxi barrel.
- Connect the Edding 661 cap on the remaining Papermate Super Magic +.
- Connect the old Velleda White Board Marker cap on the front of the old Giotto Turbo Maxi barrel.