Ivan Giotto

The Ivan Giotto is a double sided mod made by FPSB modder, VoreTex. It was made for VicGotGame for his project: "X incipiens stabilus".

Construction

Parts needed

List from the video below

• x2 Giotto Turbo Maxi (2 body, 2 backplugs)
• x2 Pilot Dr.Grip (Grips) (facultative: fronts)
• x2 O-ring
• x2 Decorative grips (original use base of Z-grip and 4 o-ring for 1 side)
• x2 Archery bullet tips

Additional Items

• Tape

Text tutorial

Mise en place

1. Cut the front and dissasemble both Giotto Turbo Maxi barrel.
2. Cut the Giotto Turbo Maxi backplug from the ring
3. Cut 1 of the 2 Giotto Turbo Maxi body in half.
4. Cut the 2 Pilot Dr.Grip grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips

Assembly

1. Put one giotto backplug in each hole of the uncuted Giotto Turbo Maxi body
2. Add one O-ring on each backplug, connect the 2 half of the cutted Giotto Turbo Maxi barrel. (tape might be necessary to hold the parts well)
3. Add some tape around the Archery bullet tip (connect with the Pilot Dr.Grip front, this should prevent the tips from falling)
4. Put the Archery bullet tip in the Ivan giotto base, it should fit snug.
5. Add the Decorative grip then add one half of Pilot Dr.Grip
6. Repeat on the other side

Video tutorial

Video tutorial by VoreTex.