KUzu G3 (UPSB ver.)

The KUzu G3 is a personal mod of JEB spinner KUzu.

Construction

Parts needed

List from UPSB V3:

• 1x Plastic G3 (Barrel, tip)
• 1x Zebra Hyper Jell (Grip and cap)
• 1x HGG (tip)
• 2x Uni-Ball Signo DX (2 tips, 1 grip)
• 2x Pilot Hi-Tec-C (Tips)
• 1x Dong-A Anyball (Grip)
• 1x Uni-ball Knock (Grip)
• 1x 1 cm grip (Zebra Hyper Jell can be used)

Additional Items

• Electric (black) tape
• an inserts (Facutative) (kUzu uses a page of the "Weekly jump" magasine)

Text tutorial

Mise en place

1. Remove the backplug, grip and ink of the Plastic G3, then sand down the nubs on the front.
2. Cut 1cm of a grip (Zebra Hyper Jell recommanded).
3. Cut 1cm of Zebra Hyper Jell grip.
4. Do a gripcut on the Uni-ball Knock.
5. Cut 3 section of your Dong-A Anyball grip.
6. Cut the clip of the Zebra Hyper Jell cap.
7. Remove one grip and 2 tips of Uni-Ball Signo DX.
8. Remove the tips of HGG and Pilot Hi-Tec-C.

Assembly

1. Add 1cm of Zebra Hyper Jell grip on the front of the Plastic G3.
2. Add 1cm of the other grip next to the Zebra Hyper Jell grip.
3. Put the Pilot Hi-Tec-C tip on the Plastic G3, then add a Uni-Ball Signo DX tip onto the Pilot Hi-Tec-C tip (add Tape / blu-tak to help the tips stay in place).
4. Cover your 3 tips with the Uni-Ball Signo DX grip.
5. Put your Uni-ball Knock grip on the Uni-Ball Signo DX grip.
6. Add the 3 section of Dong-A Anyball grip in front of the Uni-ball Knock grip.
7. Put one Uni-Ball Signo DX tip inside the Zebra Hyper Jell cap.
8. Put the HGG tip on the remaining Pilot Hi-Tec-C tip. Then put it inside the rest of the Zebra Hyper Jell grip.
9. Put the Zebra Hyper Jell grip inside the Zebra Hyper Jell cap (HGG tip first).
10. Wrap some tape on the back of the Plastic G3 body.
11. (Facultative) Add an insert.
12. Assemble the cap on the back of the Plastic G3 body.

Trivia

• This version of the mod is not the legit one used by kUzu, the tutorial of his main one remain secret to this day. However, the list of the parts is available: