White Stick V2
More actions
The White Stick V2 is the second iteration of the White Stick mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the Tru Red pen, all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the Pilot Opt pencils.
The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.
Images coming soon. (hopefully)
Construction
Parts needed
- 2x M&G Acrylic Paint Markers (barrel)
- 2x Pilot Opt Shaker (tip / sub-body)
- 1x Tru Red Gripped Ballpoint Stick Pen (cap / grip)
- Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
- 2x (9mm ID x 12mm OD) Food Grade Silicone Tube