White Stick V2

The White Stick V2 is the second iteration of an aptly named mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure. Aside from the Tru Red Gripped Ballpoint Stick Pen, all parts are relatively obtainable internationally, and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the Pilot Opt Shaker.

Cutting the silicone tubes has consistency issues due to curvature caused by the manufacturing process. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Images coming soon. (hopefully)

Construction

Tutorial

https://youtu.be/Vl1JAtD8r8A?si=yU4VRmbvy_xT_0sl

Parts needed

• 3x Acrylic Paint Markers (barrel)
  • Many duplicate subs, ensure 8.5cm length and 12mm OD
• 2x Pilot Opt Shaker (tip / sub-body)
• 1x Tru Red Gripped Ballpoint Stick Pen (cap / grip)
  • Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
• 1x (9mm ID x 12mm OD) Food Grade Silicone Tube