Toggle menu
480
656
204
5K
Fen Spinner Wiki
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Magia Factis

From Fen Spinner Wiki
Revision as of 10:49, 28 August 2026 by V 0 1 D (talk | contribs) (=Additional items)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Magia Factis is a double-sided, 2-Pen 1-Hand–focused mod made by Magiai. It was made after its creator was inspired by by the RPD Factis V2 mod.

Construction

Parts needed

Parts list from the author of this article (for one mod):

Additional items

  • Glue

Text tutorial

Preparation

  1. Cut two 1.5 cm lengths of the plastic hose.
  2. Cut the lip of the SuperTips caps.
  3. Cut 0.5 cm of heavy grips then slice it in half.
  4. Cut two-thirds of the front part of Energel (the "tip" part should be the shortest).
  5. File the part interior of the back of the SuperTips caps.
  6. File the round exterior part of the Spinpro tips.
  7. Cut both Factis barrels to 7.8 cm.
  8. Cut a 1.2 cm section from the back of the Thick Veleda WhiteBoard Marker barrel.
  9. Cut a 4 cm section of Dong-A Com.ssa

Assembly

  1. Put the sliced heavy grip and put it inside the SuperTips cap.

  2. Put the front part of Energel in the SuperTips cap (Side where the lip was) thread side first.
  3. Glue the remaining part of Energel inside the Factis body (cut side).
  4. Push the Spinpro silver tip inside the SuperTips cap
  5. Add one o-ring on the SuperTips cap.
  6. Put a 1.5 cm piece of hose on the SuperTips cap, then overgrip it with the cut part.
  7. Put a whole SuperGrip grip on the cap striped side first, the flat part should cover the Spinpro tip.

  8. Overgrip all of it with a whole Ankara pen grip.

  9. Repeat the previous steps once more.
  10. Put the piece of thick Veleda WhiteBoard Marker on the center of the Dong-A Com.ssa
  11. Connect the two Factis bodies.

Additional information

  • On the mod, the Ankara pen grip is 4.2cm
  • Using a sanded Tsukineko Emboss backplug instead of Energel is recommended since it removes the usage of glue.
  • The mod feeling is significantly different than a RPD Factis V1 as the weight distribution is longer and heavier.

References