Fly Emboss Private ver.
From Fen Spinner Wiki
More actions
 | This article contains leaked information from an anonymous source. The authenticity has been regarded as reasonable by Fenspinner Wiki, but cannot be guaranteed. Fenspinner Wiki has a policy of never disclosing the identity of leakers, and presents the information as-is. |
The Fly Emboss is a personal mod made by PSH spinner Fly. The original mod's tutorial was intended to be private, but Fly made a video of a "public" version showing an altered version of the mod.
Construction
Parts needed
- 2x Tsukineko Emboss Dual Pen (2 bodies)
- 4x Pilot G2 (4 flat sections and 2 striped sections)
- 2x Penzgear (6 metal rings)
- Presumed to be "Penzgear like rings", the original rings used may be different.
- 1x Pilot Airblanc (grip)
- 2x Plastic hole plug
Text tutorial
Preparation
- Cut one Emboss body to 2x 4.2cm (keep the front from one).
- Cut the G2 grip to 4x flat stripe, 2x 2 section, and 2x 5 section.
- Cut 2x 1 cm of Airblanc grip.
Assembly
- Connect both Emboss parts to the uncut Emboss barrel.
- Add the grips in this order: 5 stripes of G2 grip, a flat section of G2 grip (no ring side first), and another G2 flat part half hanging (ring side first).
- Put 3 Penzgear type rings on the Plastic hole plug.
- Push the ring assembly inside the hanging G2 half.
- Add 1 cm of Airblanc grip on the hanging g2 section.
- Repeat on the other side.