IM* Hybrid V2

The IM* Hybrid V2 is a double-sided mod made by VoreTex for Gollumsk8.

Construction

Parts needed

Parts list from the pictures below:

• 2x Anyball (grip)
• 2x Pilot Dr. Grip (tips)
• 2x Edding 661 (caps)
• 2x Pilot Opt (grips)
• 2x Crayola SuperTips (body)
• 3x O-ring
  • The original uses three with different colors.
• A body to connect both SuperTips.

Text tutorial

Preparation

1. Cut after the 3rd dimple of both Opt grips.
2. Cut ~1.5 cm from the front of both SuperTips bodies.
3. Cut ~3.7 cm from the back of both Edding 661 caps.

Assembly

Diagram picture of the caps

1. Put the Dr. Grip tip inside the flat end of each Edding cap.
2. Add the Opt grip onto the Edding cap.
3. Overgrip the Opt grips with whole Anyball grips; the side without the small ring should leave ~2 stripes visible on the Edding body.
   

   

   
   
4. Push the Edding cap over the front of a SuperTips barrel.
5. Repeat on the other SuperTips barrel.
6. Add three O-rings to the connector and join the two mod bases.