Energel ST v2: Difference between revisions

Latest revision as of 16:22, 3 October 2026

The Energel ST v2 is a long mod designed to help with performing Power Tricks.

The tutorial for the mod was published by i.suk in March 2018 and it has since enjoyed widespread popularity for its straightforward construction and practical spinning characteristics.

Construction

Parts needed

List and tutorial from i.suk's YouTube Channel:^[1]

1x Supertip (barrel)
2x Energel (barrels)
1x Dr. Grip (grip)
2x Signo (tips)
1x Comssa (backplug)

Text tutorial^[2]

Cut both patterned Energel barrel sections to 6.3 cm, retaining the threaded end shown. The source specifies that these sleeves give a finished length of 23.7 cm.
Empty the SuperTips barrel and remove its backplug. Fit a Comssa backplug into the rear opening.
Sand the Comssa backplug slightly until an Energel sleeve fits over it securely. Add tape around the front of the SuperTips barrel to secure the other sleeve.
Cut one Dr. Grip grip in half and fit one half over each Energel sleeve.
Wrap tape around each Signo tip until it fits tightly inside the Energel sleeve. Insert the tips in reverse, with their points facing inward, beneath the Dr. Grip halves.
Attach the completed Energel end assemblies to both ends of the SuperTips barrel.

Video tutorial

Video tutorial by I.suk.

References

↑ https://youtu.be/FEdTTBG_4Jw
↑ Energel ST v2 tutorial, labelled photographs credited to i.suk.

[i.suk-1] ttps://youtu.be/FEdTTBG_4Jw

[2] Energel ST v2 tutorial, labelled photographs credited to i.suk.

[1]

[2]

@@ Line 22: / Line 22: @@
 *1x [[Comssa]] (backplug)
-===Text tutorial===
+===Text tutorial<ref>[https://penmodding.pm/archives/5436 Energel ST v2 tutorial], labelled photographs credited to i.suk.</ref>===
+# Cut both patterned Energel barrel sections to 6.3 cm, retaining the threaded end shown. The source specifies that these sleeves give a finished length of 23.7 cm.<br>[[File:EnergelSTv2CutLocation.jpg|left|thumb|200px]]<br clear=all><br>[[File:EnergelSTv2SleeveMeasurement.jpg|left|thumb|200px]]<br clear=all>
-# Cut the Energel barrel as shown. A 6.3 cm barrel gives a final length of 23.7 cm. <br>[[File:Energelst1.JPG|left|thumb|200px]]<br clear=all>
+# Empty the SuperTips barrel and remove its backplug. Fit a Comssa backplug into the rear opening.<br>[[File:EnergelSTv2Parts.jpg|left|thumb|200px]]<br clear=all>
-# Empty the SuperTips barrel by removing the marker and backplug.
+# Sand the Comssa backplug slightly until an Energel sleeve fits over it securely. Add tape around the front of the SuperTips barrel to secure the other sleeve.
-# Disassemble the Comssa for its backplug and attach it to the SuperTips barrel. Sand the Comssa backplug slightly.
+# Cut one Dr. Grip grip in half and fit one half over each Energel sleeve.
-# Add tape on tip section of the SuperTip barrel.
+# Wrap tape around each Signo tip until it fits tightly inside the Energel sleeve. Insert the tips in reverse, with their points facing inward, beneath the Dr. Grip halves.<br>[[File:EnergelSTv2TipAssembly.jpg|left|thumb|200px]]<br clear=all>
-# Cut the Dr. Grip grip in half and place both grips on the two Energel barrels.
+# Attach the completed Energel end assemblies to both ends of the SuperTips barrel.
-# Put tape over Signo tips until it fits snugly and place the tips in reverse inside the Dr. Grip grips. <br>[[File:Energelst2.JPG|left|thumb|200px]]<br clear=all>
-# Add the Energel barrels on the sides of the SuperTip barrel; done.
 ===Video tutorial===