Dr. So

The Dr. So is a double sided mod made by Zefia.

Construction

Parts needed

List from the video below

• x2 Smooth Operator (Body and caps)
• x2 Pilot Dr. Grip (Grip and tips)
• x2 Miniso frixion (Grips)
• x1 Dong-A Anyball (grip)
• x1 Pilot SuperGrip (grip and body) (Legit uses a daiso knockoff)
• x1 Uniball Impact Rt (grip)
• x1 Miniso Aquarelle brush (Body)
• x2 O-ring

Additional Items

• Tape

Text tutorial

Preparation

1. Cut both Pilot Dr. Grip grips in half.
2. Cut 2x 3 block of Miniso frixion grip.
3. Cut 2x 2 block of Dong-A Anyball grip.
4. Cut 2x 1 stripe of Pilot SuperGrip grip.
5. Cut 2x 4mm from the front of Uniball Impact Rt grip.
6. Cut 1mm of Miniso Aquarelle brush body.
7. Cut the front part of the Smooth Operator barrels.
8. Cut 2.9cm of the Smooth Operator caps.
9. Separate the "body" part of Pilot SuperGrip by cutting, it should be around 2.7cm.

Assembly

1. Put the 3 blocks of Miniso friction grip on the Pilot Dr. Grip tip.
2. In this order, on the Smooth Operator barrel, add: 4mm of Uniball Impact Rt grip, 1 stripe of Pilot SuperGrip grip, and 2 stripes of Dong-A Anyball grip.
3. Add the Smooth Operator cap on its body (at the side where the grips are).
4. Put 1 Pilot Dr. Grip tip on the Smooth Operator cap, then cover it by adding a Pilot Dr. Grip grip onto the Smooth Operator cap.
5. Repeat on the other Smooth Operator body.
6. Put 1 O-ring, then 1mm of Miniso Aquarelle brush, and lastly 1 O-ring on the center of the Pilot SuperGrip body.
7. Connect the mod using the Pilot SuperGrip body.

Video tutorial

Video tutorial by Zefia.