White Stick V2: Difference between revisions
From Fen Spinner Wiki
More actions
No edit summary |
|||
| Line 21: | Line 21: | ||
===Parts needed=== | ===Parts needed=== | ||
* | * 3x [[Acrylic Paint Markers]] (barrel) | ||
**Many duplicate subs, ensure 8.5cm length and 12mm OD | **Many duplicate subs, ensure 8.5cm length and 12mm OD | ||
* 2x [[Pilot Opt Shaker]] (tip / sub-body) | * 2x [[Pilot Opt Shaker]] (tip / sub-body) | ||
Revision as of 15:15, 1 January 2025
The White Stick V2 is the second iteration of an aptly named mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure. Aside from the Tru Red Gripped Ballpoint Stick Pen, all parts are relatively obtainable internationally, and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the Pilot Opt Shaker.
Cutting the silicone tubes has consistency issues due to curvature caused by the manufacturing process. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.
Images coming soon. (hopefully)
Construction
Tutorial
https://youtu.be/Vl1JAtD8r8A?si=yU4VRmbvy_xT_0sl
Parts needed
- 3x Acrylic Paint Markers (barrel)
- Many duplicate subs, ensure 8.5cm length and 12mm OD
- 2x Pilot Opt Shaker (tip / sub-body)
- 1x Tru Red Gripped Ballpoint Stick Pen (cap / grip)
- Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
- 2x (9mm ID x 12mm OD) Food Grade Silicone Tube