A13x Bullet Mod: Difference between revisions
From Fen Spinner Wiki
More actions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
|cog=? | |cog=? | ||
}} | }} | ||
The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era. A13x himself calls it: " | The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era. A13x himself calls it: "ABM”. | ||
The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was | The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originally created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mod remain a mystery (the tips in particular). | ||
==Construction== | ==Construction== | ||
| Line 20: | Line 20: | ||
* 2x [[Pilot Dr. Grip]]（Grip） | * 2x [[Pilot Dr. Grip]]（Grip） | ||
* 1x Old [[Giotto Turbo Maxi]] (Body) | * 1x Old [[Giotto Turbo Maxi]] (Body) | ||
* 1x Old big [[ | * 1x Old big [[Velleda White Board Marker]] (cap) | ||
* 1x Old [[Papermate Super Magic +]] (Body) | * 1x Old [[Papermate Super Magic +]] (Body) | ||
* 1x [[Edding 661]] (cap) | * 1x [[Edding 661]] (cap) | ||
| Line 31: | Line 31: | ||
* Celo tape and Electrical tape | * Celo tape and Electrical tape | ||
===Text tutorial=== | ===Text tutorial=== | ||
# Cut ~3.45 cm of the [[ | # Cut ~3.45 cm of the [[Velleda White Board Marker]] cap. | ||
# | # Disassemble the old [[Giotto Turbo Maxi]] and cut the front until it's ~1cm | ||
# Cut ~4 cm of the old [[Papermate Super Magic +]] body | # Cut ~4 cm of the old [[Papermate Super Magic +]] body. | ||
# Cut both of your [[Pilot Dr. Grip]] grips in half, | # Cut both of your [[Pilot Dr. Grip]] grips in half, keeping the flat side. | ||
# Cut 3 | # Cut 3 sections of [[Pilot G2]] grip, 1x 4 stripes, 1x 2 stripes, and 1x 1 stripe. | ||
# Put the golden secret tip inside the [[Edding 661]] cap (you may need to clear the interior | # Put the golden secret tip inside the [[Edding 661]] cap (you may need to clear the interior beforehand). | ||
# Add these grips on the [[Edding 661]] | # Add these grips on the [[Edding 661]] following this order: 4 stripes of [[Pilot G2]] grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of [[Pilot Dr. Grip]] grip. | ||
# Add these grips on the [[Veleda White Board Marker]] cap | # Add these grips on the [[Veleda White Board Marker]] cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of [[Pilot G2]] grip, and the last flat side of [[Pilot Dr. Grip]] grip. | ||
# Put the silver secret tip inside the [[ | # Put the silver secret tip inside the [[Velleda White Board Marker]] cap. | ||
# Add ~1 round of black electrical tape on the thinner side of the [[Papermate Super Magic +]] body | # Add ~1 round of black electrical tape on the thinner side of the [[Papermate Super Magic +]] body. | ||
# Add 1 stripe of [[Pilot G2]] grip on the front of the old [[Giotto Turbo Maxi]], add | # Add 1 stripe of [[Pilot G2]] grip on the front of the old [[Giotto Turbo Maxi]], and add cello tape on the rest of the front. | ||
# Put the thick side of the [[Papermate Super Magic +]] body inside the back of the old [[Giotto Turbo Maxi]] barrel | # Put the thick side of the [[Papermate Super Magic +]] body inside the back of the old [[Giotto Turbo Maxi]] barrel. | ||
# Connect the [[Edding 661]] cap on the remaining [[Papermate Super Magic +]]. | # Connect the [[Edding 661]] cap on the remaining [[Papermate Super Magic +]]. | ||
# Connect the | # Connect the old [[Velleda White Board Marker]] cap on the front of the old [[Giotto Turbo Maxi]] barrel. | ||
==References== | ==References== | ||
[[Category:Pen Mods]] | [[Category:Pen Mods]] | ||
Revision as of 16:23, 11 December 2024
The A13x Bullet Mod is the main mod of A13x during his "2013" era. A13x himself calls it: "ABM”.
The mod was made popular when A13x used it in Pen Spinning World Tournament 2013. This mod was originally created as a heavy version of a Black Bonkura KT. As of today, some parts of the mod remain a mystery (the tips in particular).
Construction
Parts needed
List from A13x's sum up video[1]
- 2x Pilot Dr. Grip（Grip）
- 1x Old Giotto Turbo Maxi (Body)
- 1x Old big Velleda White Board Marker (cap)
- 1x Old Papermate Super Magic + (Body)
- 1x Edding 661 (cap)
- 1x Pilot G2 (Grip)
- 1x ~1cm section of dimpled grip
- 2x ~0.5cm stripe of grips
- 1x ~0.7cm flat grip
- 2x Secret tips (One silver color and one gold color)
Additional Items
- Celo tape and Electrical tape
Text tutorial
- Cut ~3.45 cm of the Velleda White Board Marker cap.
- Disassemble the old Giotto Turbo Maxi and cut the front until it's ~1cm
- Cut ~4 cm of the old Papermate Super Magic + body.
- Cut both of your Pilot Dr. Grip grips in half, keeping the flat side.
- Cut 3 sections of Pilot G2 grip, 1x 4 stripes, 1x 2 stripes, and 1x 1 stripe.
- Put the golden secret tip inside the Edding 661 cap (you may need to clear the interior beforehand).
- Add these grips on the Edding 661 following this order: 4 stripes of Pilot G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Pilot Dr. Grip grip.
- Add these grips on the Veleda White Board Marker cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of Pilot G2 grip, and the last flat side of Pilot Dr. Grip grip.
- Put the silver secret tip inside the Velleda White Board Marker cap.
- Add ~1 round of black electrical tape on the thinner side of the Papermate Super Magic + body.
- Add 1 stripe of Pilot G2 grip on the front of the old Giotto Turbo Maxi, and add cello tape on the rest of the front.
- Put the thick side of the Papermate Super Magic + body inside the back of the old Giotto Turbo Maxi barrel.
- Connect the Edding 661 cap on the remaining Papermate Super Magic +.
- Connect the old Velleda White Board Marker cap on the front of the old Giotto Turbo Maxi barrel.