Kzzn Emboss: Difference between revisions
From Fen Spinner Wiki
More actions
mNo edit summary |
mNo edit summary |
||
| Line 14: | Line 14: | ||
===Parts needed=== | ===Parts needed=== | ||
List from [[Kzzn]]'s blog:<ref name="Kzzn">http://kazunoko1002.blog.fc2.com/blog-entry-41.html#more</ref> | List from [[Kzzn]]'s blog:<ref name="Kzzn">http://kazunoko1002.blog.fc2.com/blog-entry-41.html#more</ref> | ||
* 2x [[Dr. Grip Shaker|Dr. Grip]] ( | * 2x [[Dr. Grip Shaker|Dr. Grip]] (Tips) | ||
* 4x [[Pilot Supergrip|Supergrip]] ( | * 4x [[Pilot Supergrip|Supergrip]] (Grips) | ||
* 2x [[Airblanc]] ( | * 2x [[Airblanc]] (Tips) | ||
* 2x [[Pentel Hybrid Gel Roller|HGR]] ( | * 2x [[Pentel Hybrid Gel Roller|HGR]] (Backcaps) | ||
* | * 4x [[Penzgear]] (Rings) | ||
* 2x [[Tsukineko Emboss Dual Pen|Emboss]] ( | * 2x [[Tsukineko Emboss Dual Pen|Emboss]] (Barrels) | ||
* 2x [[Pilot G3|G3]] ( | * 2x [[Pilot G3|G3]] (Rubberstoppers) | ||
* 1x [[Dong-A Anyball|Anyball]] ( | * 1x [[Dong-A Anyball|Anyball]] (Grips, two is optional) | ||
* 1x [[Zebra Hyperjell|Hyperjell]] ( | * 1x [[Zebra Hyperjell|Hyperjell]] (Grip) | ||
===Text Tutorial=== | ===Text Tutorial=== | ||
Revision as of 16:58, 12 January 2022
Kzzn Emboss is a Double Sided mod created by JEB based spinner Kzzn.
Construction
Parts needed
- 2x Dr. Grip (Tips)
- 4x Supergrip (Grips)
- 2x Airblanc (Tips)
- 2x HGR (Backcaps)
- 4x Penzgear (Rings)
- 2x Emboss (Barrels)
- 2x G3 (Rubberstoppers)
- 1x Anyball (Grips, two is optional)
- 1x Hyperjell (Grip)
Text Tutorial
- Empty out Emboss barrels and cut from both sides (not including the pen tip) to about 4.2 cm.
- Attach the non-grooved/smooth part of the Supergrip on the Emboss barrels.
- Cut 5 to 7mm of Hyperjell grip and attach to Emboss Barrels. (shown below, adding a single section of supergrip is optional for effect)
- Insert the G3 rubber inside the Dr. Grip tip.
- Cut the HGR pen's backcap by about 5 mm.
Video tutorial
Video tutorial by Septopus.