Kzzn Emboss: Difference between revisions
From Fen Spinner Wiki
More actions
mNo edit summary |
mNo edit summary |
||
| Line 14: | Line 14: | ||
===Parts needed=== | ===Parts needed=== | ||
List from [[Kzzn]]'s blog:<ref name="Kzzn">http://kazunoko1002.blog.fc2.com/blog-entry-41.html#more</ref> | List from [[Kzzn]]'s blog:<ref name="Kzzn">http://kazunoko1002.blog.fc2.com/blog-entry-41.html#more</ref> | ||
* 2x [[ | * 2x [[Dr.Grip Shaker|Dr. Grip]] (tips) | ||
* 4x [[Pilot Supergrip|Supergrip]] (grips) | * 4x [[Pilot Supergrip|Supergrip]] (grips) | ||
* 2x [[Airblanc]] (tips) | * 2x [[Airblanc]] (tips) | ||
Revision as of 05:36, 18 January 2021
Kzzn Emboss is a Double Sided mod created by JEB based spinner Kzzn.
Construction
Parts needed
- 2x Dr. Grip (tips)
- 4x Supergrip (grips)
- 2x Airblanc (tips)
- 2x HGR (backcaps)
- 1x Penzgear (rings)
- 2x Emboss (barrels)
- 2x G3 (rubber from caps)
- 1x Anyball (grips, two is optional)
- 1x Hyperjell (grip)
Text Tutorial
- Empty out Emboss barrels and cut from both sides (not including the pen tip) to about 4.2 cm.
- Attach the non-grooved/smooth part of the Supergrip on the Emboss barrels.
- Cut 5 to 7mm of Hyperjell grip and attach to Emboss Barrels. (shown below, adding a single section of supergrip is optional for effect)
- Insert the G3 rubber inside the Dr. Grip tip.
- Cut the HGR pen's backcap by about 5 mm.
