Lakubo mod: Difference between revisions
From Fen Spinner Wiki
More actions
m →Text tutorial: Removed excessive redirect |
m Removed excessive redirect |
||
| Line 2: | Line 2: | ||
|name= | |name= | ||
|image={{#setmainimage:lakubomod.jpg}} | |image={{#setmainimage:lakubomod.jpg}} | ||
|creator= | |creator= Eddie | ||
|style= [[Single Sided]] | |style= [[Single Sided]] | ||
|length= 18.6cm | |length= 18.6cm | ||
| Line 8: | Line 8: | ||
|cog= Slightly tip heavy | |cog= Slightly tip heavy | ||
}} | }} | ||
The '''Lakubo mod''' is a mod invented by Hong Kong spinner | The '''Lakubo mod''' is a mod invented by Hong Kong spinner Eddie. | ||
The mod was popularized by the easy acess of the parts, being a single cap mod that neither a [[Pentel RSVP|RSVP]] or a [[Pilot G3|G3]] based mod. This mod is called "'''Lakubo SG'''" in Japan. | The mod was popularized by the easy acess of the parts, being a single cap mod that neither a [[Pentel RSVP|RSVP]] or a [[Pilot G3|G3]] based mod. This mod is called "'''Lakubo SG'''" in Japan. | ||
Revision as of 01:44, 22 January 2025
The Lakubo mod is a mod invented by Hong Kong spinner Eddie.
The mod was popularized by the easy acess of the parts, being a single cap mod that neither a RSVP or a G3 based mod. This mod is called "Lakubo SG" in Japan.
Construction
Parts needed
List from archived UPSB wiki article[1]
- 1 Uni-Ball Lakubo (Everything)
- 1 Pilot Supergel / Neogel（Cap)
Additional Items
- 1 inserts (Facultative)
- Clear tape
Text tutorial
- Remove the backplug of the Lakubo pen, take out the inktube and poke a hole into it.
- Put the nib of the inktube in the hole of the backplug (screw back the backplug now if you don't have an insert).
- (Facultative) Roll an insert and put in inside the Lakubo, screw back the backplug on the body.
- Add tape on the backplug.
- Remove the Pilot Supergel / Neogel cap and put it on the backplug.