Hibachi mod: Difference between revisions

← Older edit

Latest revision as of 14:07, 27 August 2026

The Hibachi mod is a single sided mod made by Hibachi. He calls it "Akashiya mod" (あかしやmod).

Construction

Parts needed

List from Hibachi's blog:^[1]

x1 Akashiya Fude Brush Pen SA-300 (body)
x1 Pilot G3 (cap)
x1 Pentel Color Twin (large cap)
x1 Pilot G2 (grip)
x1 Miffy&Melanie (barrel)
x1 Pentel Hybrid Gel Grip (tip)
x1 Pilot SuperGrip (grip)
x4/5 Dong-A Anyball (grips; 2x 2-stripe sections are coloured, and the remaining sections are black)
x1 Uni-Ball Lakubo (grip)
x1 Zebra Jell.be (tip)
x1 Tombow Reporter 3 (grip)
x1 Zebra Hyper Jell (grip)
x1 Daiso Power Clip Pen (grip)
x1 Unknown black grip
x1 Unknown plastic tip

Additional Items

Tape
Glue

Text tutorial

Preparation

Hollow the Color Twin cap.
Cut the Akashiya Fude Brush Pen 12.5 cm from the back.
(Optional) Empty the Akashiya Fude Brush Pen.
Cut the G3 cap to 9 mm, then cut 2 cm from the first cut.
Cut 1.7 cm from the front of the Miffy & Melanie barrel.
Cut 2x 2-block coloured Anyball sections, plus 1x 3-block, 1x 6-block, 1x 7-block, and 1x 9-block sections.
Cut one 2-block black Anyball section.
Cut the Daiso Power Clip Pen grip to 9 mm.
Cut 2 stripes of SuperGrip grip.
Cut approximately 1.8–1.9 cm of Lakubo grip from the dimpled section.
Cut a round section of Tombow Reporter 3 grip; unstick it beforehand.
Cut 6 mm and 8 mm sections of Zebra Hyper Jell grip.

Assembly

Cap side

Secure the Hybrid Gel Grip tip to the front of the Miffy & Melanie tip section with tape.
Place the 2 cm section of G3 cap over it and secure it with tape.
Put the assembly inside the Color Twin cap, using tape to hold it in place.
Add grips in this order: 2 stripes of coloured Anyball, 7 stripes of Anyball, then the cut Lakubo grip section.
Overgrip the Lakubo grip with the 9-block Anyball section.
Place the round Tombow Reporter 3 grip section inside the cap assembly and glue it in place. The inside of the cap should not remain visible.

Front side

Place the Zebra Jell.be tip over the unknown black grip and tape it to the front of the Akashiya barrel.
Add grips in this order: the 2-block Anyball section, 6 mm of Zebra Hyper Jell grip, and a whole G2 grip.
Add the 2-block coloured Anyball section, the 3-block black Anyball section, then a whole black Anyball grip.
Overgrip the last assembly in this order: the 6-block Anyball section, 9 mm of Daiso Power Clip Pen grip, and 8 mm of Zebra Hyper Jell grip.

References

↑ http://hibachispin.blog.fc2.com/blog-entry-1.html

[Tutorial-1] ttp://hibachispin.blog.fc2.com/blog-entry-1.html

[1]

@@ Line 14: / Line 14: @@
 List from Hibachi's blog:<ref name="Tutorial">http://hibachispin.blog.fc2.com/blog-entry-1.html</ref>
-* x1 Akashiya Fude brush Pen SA-300  (body)
+* x1 Akashiya Fude Brush Pen SA-300 (body)
-* x1 [[Pilot G3]] (Cap)
+* x1 [[Pilot G3]] (cap)
-* x1 [[Pentel Color Twin]] (Big cap)
+* x1 [[Pentel Color Twin]] (large cap)
 * x1 [[Pilot G2]] (grip)
-* x1 [[Miffy&Melanie]] (Barrel)
+* x1 [[Miffy&Melanie]] (barrel)
 * x1 [[Pentel Hybrid Gel Grip]] (tip)
 * x1 [[Pilot SuperGrip]] (grip)
-* x4/5 [[Dong-A Anyball]] (Grips, one colored, the rest are black ones)
+* x4/5 [[Dong-A Anyball]] (grips; 2x 2-stripe sections are coloured, and the remaining sections are black)
 * x1 [[Uni-Ball Lakubo]] (grip)
 * x1 Zebra Jell.be (tip)
-* x1 Tombow Reporter 3 (Grip)
+* x1 Tombow Reporter 3 (grip)
-* x1 [[Zebra Hyper Jell]] (Grip)
+* x1 [[Zebra Hyper Jell]] (grip)
-* x1 Daiso Power clip pen (Grip)
+* x1 Daiso Power Clip Pen (grip)
+* x1 Unknown black grip
 * x1 Unknown plastic tip
@@ Line 34: / Line 35: @@
 ===Text tutorial===
 ====Preparation====
 # Hollow the Color Twin cap.
-# Cut 12.5cm from the back of the Akashiya Fude pen.
+# Cut the Akashiya Fude Brush Pen 12.5 cm from the back.
-# (Facultative) Clear the Akashiya Fude pen.
+# (Optional) Empty the Akashiya Fude Brush Pen.
-# Cut your G3 cap to 9mm, then 2cm from the first cut
+# Cut the G3 cap to 9 mm, then cut 2 cm from the first cut.
-# Cut 1.7cm from the front of the Miffy&Melanie.
+# Cut 1.7 cm from the front of the Miffy & Melanie barrel.
-# Cut 2x 2 block of Anyball (Colored), 1x 3 block, 1x 6 block, 1x 7 block and 1x 9 block
+# Cut 2x 2-block coloured Anyball sections, plus 1x 3-block, 1x 6-block, 1x 7-block, and 1x 9-block sections.
-# Cut 2 block of Anyball,
+# Cut one 2-block black Anyball section.
-# cut the Daiso Power clip pen to 9mm
+# Cut the Daiso Power Clip Pen grip to 9 mm.
 # Cut 2 stripes of SuperGrip grip.
-# Cut ~1.8/1.9cm of Lakubo grip from the dimpled part.
+# Cut approximately 1.8–1.9 cm of Lakubo grip from the dimpled section.
-# Cut a round part of Tombow Reporter 3 grip (unstick it beforehand).
+# Cut a round section of Tombow Reporter 3 grip; unstick it beforehand.
-# Cut 6mm and 8mm of Zebra Hyper Jell grip.
+# Cut 6 mm and 8 mm sections of Zebra Hyper Jell grip.
 ====Assembly====
 =====Cap side=====
-# Fix the Hybrid Gel Grip in the front of Miffy&Melanie tip part with tape.
-# Put 2cm of G3 cap over it and tape it.
+# Secure the Hybrid Gel Grip tip to the front of the Miffy & Melanie tip section with tape.
-# Put the package into the Color Twin cap, use tape to make it stay in place
+# Place the 2 cm section of G3 cap over it and secure it with tape.
-# Add grips in this order: 2 stripes of colored Anyball, 7 stripes of Anyball, then the cut secion of Lakubo grip.
+# Put the assembly inside the Color Twin cap, using tape to hold it in place.
-# Overgrip the Lakubo grip with 9 block of Anyball.
+# Add grips in this order: 2 stripes of coloured Anyball, 7 stripes of Anyball, then the cut Lakubo grip section.
-# Put the round part of Tombow Reporter 3 inside the cap assembly and glue it (the interior of the cap should not be visible)
+# Overgrip the Lakubo grip with the 9-block Anyball section.
+# Place the round Tombow Reporter 3 grip section inside the cap assembly and glue it in place. The inside of the cap should not remain visible.
 =====Front side=====
-# Put the Zebra Jell.be tip over the unknown black grip and tape it to the front of the Akashiya barrel.
-# Add grips in this order: 2 block of Anyball, 6mm of Zebra Hyper Jell grip and a whole G2 grip.
+# Place the Zebra Jell.be tip over the unknown black grip and tape it to the front of the Akashiya barrel.
-# Add 2 block of colored Anyball grip, 3 block of black Anyball grip, then a whole black Anyballgrip
+# Add grips in this order: the 2-block Anyball section, 6 mm of Zebra Hyper Jell grip, and a whole G2 grip.
-# Overgrip the last step in this order: 6 stripes of Anyball grip, 9mm of Daiso Power clip pen grip and 8mm of Zebra Hyper Jell grip.
+# Add the 2-block coloured Anyball section, the 3-block black Anyball section, then a whole black Anyball grip.
+# Overgrip the last assembly in this order: the 6-block Anyball section, 9 mm of Daiso Power Clip Pen grip, and 8 mm of Zebra Hyper Jell grip.
 ==References==
 [[Category:Pen Mods]]