Ivan Giotto: Difference between revisions
From Fen Spinner Wiki
More actions
Created page with "{{Mod Infobox |name= |image={{#setmainimage:igiotto.jpg}} |creator= VoreTex |style= Double Sided |length= 24cm |weight= ~30g |cog= cop }} The ''' Ivan Giotto''' is a double sided mod made by FPSB modder, VoreTex. It was made for VicGotGame for his project: "X incipiens stabilus"<ref name="X incipiens stabilus">https://www.youtube.com/watch?v=YzfvruJabVY</ref>. ==Construction== ===Parts needed=== List from the video below * x2 Giotto Turbo Maxi..." |
|||
| Line 23: | Line 23: | ||
===Text tutorial=== | ===Text tutorial=== | ||
==== | ====Preparation==== | ||
# Cut the front and dissasemble both [[Giotto Turbo Maxi]] barrel. | # Cut the front and dissasemble both [[Giotto Turbo Maxi]] barrel. | ||
# Cut the [[Giotto Turbo Maxi]] backplug from the ring | # Cut the [[Giotto Turbo Maxi]] backplug from the ring | ||
# Cut 1 of the 2 [[Giotto Turbo Maxi]] body in half. | # Cut 1 of the 2 [[Giotto Turbo Maxi]] body in half. | ||
# Cut the 2 [[Pilot Dr.Grip]] grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips | # Cut the 2 [[Pilot Dr.Grip]] grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips | ||
====Assembly==== | ====Assembly==== | ||
Revision as of 10:04, 22 November 2024
The Ivan Giotto is a double sided mod made by FPSB modder, VoreTex. It was made for VicGotGame for his project: "X incipiens stabilus"[1].
Construction
Parts needed
List from the video below
- x2 Giotto Turbo Maxi (2 body, 2 backplugs)
- x2 Pilot Dr.Grip (Grips) (facultative: fronts)
- x2 O-ring
- x2 Decorative grips (original use base of Z-grip and 4 o-ring for 1 side)
- x2 Archery bullet tips
Additional Items
- Tape
Text tutorial
Preparation
- Cut the front and dissasemble both Giotto Turbo Maxi barrel.
- Cut the Giotto Turbo Maxi backplug from the ring
- Cut 1 of the 2 Giotto Turbo Maxi body in half.
- Cut the 2 Pilot Dr.Grip grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips
Assembly
- Put one giotto backplug in each hole of the uncuted Giotto Turbo Maxi body
- Add one O-ring on each backplug, connect the 2 half of the cutted Giotto Turbo Maxi barrel. (tape might be necessary to hold the parts well)
- Add some tape around the Archery bullet tip (connect with the Pilot Dr.Grip front, this should prevent the tips from falling)
- Put the Archery bullet tip in the Ivan giotto base, it should fit snug.
- Add the Decorative grip then add one half of Pilot Dr.Grip
- Repeat on the other side
Video tutorial
Video tutorial by VoreTex.