Huwng KT: Difference between revisions

← Older edit

Latest revision as of 10:11, 28 August 2026

Huwng KT is a mod made by Huwng from VNPS.

Construction

Parts needed

Parts list from Huwng's blog.^[1]

2x 'New' SuperTips (barrel)
2x Oasis Color Twin (caps)
2x Eno Hi-Tec-C (tips)
2x Dr. Grip (grips)
1x Eno ST Connector/Round Stic (barrel)

Text tutorial

Cut the Dr. Grip grips 2.1 cm from the lip side.
Insert the Hi-Tec-C tips into the CT caps.
Place the Dr. Grip grips over the front of the CT caps.
Cut the ST barrels 6.4 cm from the front.
Connect the ST barrels from the back with the ST connector or a section of the Round Stic.
Attach the caps to the body.

References

↑ Huwng's blog

[1] Huwng's blog

[1]

@@ Line 9: / Line 9: @@
 }}
 '''Huwng KT''' is a mod made by [[Huwng]] from [[VNPS]].
-The original mod is specifically made out of Oasis CT Caps, Eno hi-tec-c tips, and old thick golden text supertips. Original tut can be found [https://caotienhung.blogspot.com/2021/11/personal-kt.html here.]
 ==Construction==
-===Parts Needed===
+===Parts needed===
-List from a now deleted video by Huwng
+Parts list from Huwng's blog.<ref>[https://caotienhung.blogspot.com/2021/11/personal-kt.html Huwng's blog]</ref>
-* 2x [[Supertip]] (Barrels)
+* 2x [[Crayola SuperTips|'New' SuperTips]] (barrel)
-* 2x [[ColorTwin]] (Caps)
+* 2x [[Pentel Color Twin| Oasis Color Twin]] (caps)
-* 2x [[Hi-tec-C]] (Tips)
+* 2x [[Pilot Hi-Tec-C|Eno Hi-Tec-C]] (tips)
 * 2x [[Dr. Grip]] (grips)
-* 1x [[Eno ST Connector]] or [[Bic Round Stic]] (Barrel)
+* 1x [[Eno ST Connector]]/[[Bic Round Stic|Round Stic]] (barrel)
+===Text tutorial===
+# Cut the Dr. Grip grips 2.1 cm from the lip side.
+# Insert the Hi-Tec-C tips into the CT caps. <br>[[File:Huwng 1.jpg|left|thumb|200px]]<br clear=all>
+# Place the Dr. Grip grips over the front of the CT caps.
+# Cut the ST barrels 6.4 cm from the front.<br>[[File:Huwng 2.jpg|left|thumb|200px]]<br clear=all>
+# Connect the ST barrels from the back with the ST connector or a section of the Round Stic.<br>[[File:Huwng 3.jpg|left|thumb|200px]]<br clear=all>
+# Attach the caps to the body.<br>[[File:Huwng 4.jpg|left|thumb|200px]]<br clear=all>
-===Text Tutorial===
+==References==
-# Cut the Dr grip grips in half
-# Take the CT caps and hammer the Hi Tec C tips into them. <br>[[File:Huwng 1.jpg|left|thumb|200px]]<br clear=all>
-# Put the Dr. Grip grips over the front of caps and tips
-# Cut both of the ST barrels to 6.5 cm from the front <br>[[File:Huwng 2.jpg|left|thumb|200px]]<br clear=all>
-# Connect the ST barrels with the ST connector or a small piece of bic barrel<br>[[File:Huwng 3.jpg|left|thumb|200px]]<br clear=all>
-# Put caps on the body and you are done! <br>[[File:Huwng 4.jpg|left|thumb|200px]]<br clear=all>
 [[Category:Pen Mods]]