Neir'dalogy

The Neir'dalogy is a personal mod made by FPSB spinner Neir'da.

Construction

Parts needed

List from the pictures below:

• 1x Aopo Office Mate (barrel)
• 2x Airfit light (2 tips)
• 2x Nitom Stalogy (2 barrels)
• 1x Pentel OH! Gel (grip)
• 2x Zebra Tect 2way (1 white silicone ring and 2 black silicon ring)
  • The later version uses 3 white silicon rings.
• 2x Miffy&Melanie (2 Caps)
  • Except for the color tone, the caps are the same as Pentel Color Twin
• 2x Dr. Grip G-spec (2 inner and 2 outer grips)
• 4x O-ring
  • Neir'da uses colored O-rings

Text tutorial

Diagram of the caps

Preparation

1. Empty both Miffy caps.
2. Using the pictures, cut the G-spec inner grips.
3. Cut both G-spec outer grip the same size as the longer segment of the smaller one.
4. Cut ~7.1 cm of the Stalogy barrels.
5. Cut your Ohgel grip in half.
6. Cut a section of Aopo body.

Assembly

1. Place the Ohgel half at ~1 cm from the top of the Miffy cap.
2. Over grip it in this order: Small section of inner G-spec body, colored O-ring, Tect ring, and another colored O-ring.
   

   

   
   
3. Place the Airfit tip inside the Miffy cap (tip reversed) and add the G-spec outer grip onto it.
4. Overgrip the outer G-spec grip with the bigger inner G-spec grip.
   

   

   
   
5. Place the modded cap on one cut Stalogy barrel.
6. Repeat on the other Stalogy barrel and modded cap.
7. Place the last Tect ring on the Aopo cut barrel.
8. Connect both Stalogy barrel on the Aopo cut barrel.