KiRer Comssa: Difference between revisions

Latest revision as of 19:13, 1 October 2026

The KiRer Comssa is a double-sided mod made by JEB spinner KiRer. DArKT used it in Pen Spinning World Tournament 2019 in Rounds 1 and 6.

Construction

Parts needed

Parts list from Ponkotu's blog^[1]

2x Dong-A Computer Sign Pen (1 body, 2 caps)
4x Anyball(grips)
2x Pilot G2 (grips)
1x Pen'z Gear (rings)
1x Pentel RSVP (metal nib from the ink tube)

Text tutorial

Preparation

Empty the Comssa barrel and remove its writing tip.
Remove the metal nib from an RSVP refill. Insert it into the Comssa writing tip, then refit that tip to the barrel.
Cut two five-ring, two four-ring, and two seven-ring Anyball sections.
Separate the ribbed and smooth sections of both G2 grips. Keep the ribbed sections.

Assembly

Fit a five-ring Anyball section onto one Comssa cap, followed by a ribbed G2 section.
Insert four Pen’z Gear rings into the part of the G2 grip extending beyond the cap. Tape the rings to the cap first if needed to hold them in position.
Cover this assembly with a four-ring Anyball section, followed by a seven-ring section.
Repeat the assembly on the second cap.
Fit the prepared caps onto both ends of the Comssa barrel.

References

↑ Tutorial

[1] Tutorial

[1]

@@ Line 23: / Line 23: @@
 ===Text tutorial===
 ====Preparation====
-# Cut two 5-block pieces, two 4-block pieces, and two 7-block pieces of Anyball grip.
+# Empty the Comssa barrel and remove its writing tip.
-# Separate the stripped and the flat part of both Pilot G2 grips.
+# Remove the metal nib from an RSVP refill. Insert it into the Comssa writing tip, then refit that tip to the barrel.<br>[[File:KiRerComssaRSVPNib.jpg|left|thumb|200px]]<br clear=all><br>[[File:KiRerComssaNibInsertion.jpg|left|thumb|200px]]<br clear=all>
-# Remove the ink of the Comssa pen.
+# Cut two five-ring, two four-ring, and two seven-ring Anyball sections.<br>[[File:KiRerComssaAnyballCuts.jpg|left|thumb|200px]]<br clear=all>
+# Separate the ribbed and smooth sections of both G2 grips. Keep the ribbed sections.
 ====Assembly====
-# Add 5-block of Anyball grip, then a stripped section of Pilot G2 grip on the Com ssa pen cap.
+# Fit a five-ring Anyball section onto one Comssa cap, followed by a ribbed G2 section.<br>[[File:KiRerComssaCapGrips.jpg|left|thumb|200px]]<br clear=all>
-# Put 4 Pen'z Gear rings in the Pilot G2 grip.
+# Insert four Pen’z Gear rings into the part of the G2 grip extending beyond the cap. Tape the rings to the cap first if needed to hold them in position.<br>[[File:KiRerComssaPenzRings.jpg|left|thumb|200px]]<br clear=all>
-# Overgrip this with 4 blocks then 7 blocks of Anyball grip.
+# Cover this assembly with a four-ring Anyball section, followed by a seven-ring section.<br>[[File:KiRerComssaOvergrips.jpg|left|thumb|200px]]<br clear=all>
-# Repeat these steps on the other Com ssa pen.
+# Repeat the assembly on the second cap.
-# Put the metal nib of Pentel RSVP inside the front of the Com ssa pen.
+# Fit the prepared caps onto both ends of the Comssa barrel.<br>[[File:KiRerComssaFinished.jpg|left|thumb|200px]]<br clear=all>
-# Connect all components.
 ==References==
+<references />
 [[Category:Pen Mods]]