Ivan Giotto: Difference between revisions
From Fen Spinner Wiki
More actions
| (4 intermediate revisions by 2 users not shown) | |||
| Line 8: | Line 8: | ||
|cog= cop | |cog= cop | ||
}} | }} | ||
The ''' Ivan Giotto''' is a double sided mod made by [[FPSB]] modder | The '''Ivan Giotto''' is a double-sided mod made by [[FPSB]] modder [[VoreTex]]. It was made for [[VicGotGame]] for his project: "X incipiens stabilus"<ref name="X incipiens stabilus">https://www.youtube.com/watch?v=YzfvruJabVY</ref>. | ||
==Construction== | ==Construction== | ||
===Parts needed=== | ===Parts needed=== | ||
Parts list from the video below: | |||
* x2 [[Giotto Turbo Maxi]] (2 | * x2 [[Giotto Turbo Maxi]] (2 bodies, 2 back plugs) | ||
* x2 [[Pilot Dr.Grip]] ( | * x2 [[Pilot Dr. Grip]] (grips; optional: fronts) | ||
* x2 O-ring | * x2 O-ring | ||
* x2 Decorative grips (original use base of [[Z-grip]] and 4 | * x2 Decorative grips (original use base of [[Z-grip]] and 4 O-rings for 1 side) | ||
* x2 Archery bullet tips | * x2 Archery bullet tips | ||
====Additional | ====Additional items=== | ||
* Tape | * Tape | ||
===Text tutorial=== | ===Text tutorial=== | ||
====Preparation==== | ====Preparation==== | ||
# Cut the front and | # Cut the front and disassemble both Giotto barrels. | ||
# Cut the | # Cut the Giotto back plug from the ring. | ||
# Cut | # Cut one of the two Giotto bodies in half. | ||
# Cut | # Cut both Dr. Grip grips in half and optionally cut the front to roughly the same size as the 2 Archery bullet tips | ||
====Assembly==== | ====Assembly==== | ||
# Put one | # Put one Giotto back plug in each hole of the uncut Giotto body. | ||
# Add one O-ring on each | # Add one O-ring on each back plug and connect the two halves of the cut Giotto barrel. (tape might be necessary to hold the parts well) | ||
# Add some tape around the Archery bullet tip (connect with the | # Add some tape around the Archery bullet tip (connect with the Dr. Grip front, this should prevent the tips from falling). | ||
# Put the Archery bullet tip in the Ivan | # Put the Archery bullet tip in the Ivan Giotto base, it should fit snugly. | ||
# Add the | # Add the decorative grip, then add one half of a Dr. Grip grip. | ||
# Repeat on the other side | # Repeat on the other side. | ||
===Video tutorial=== | ===Video tutorial=== | ||
Latest revision as of 11:36, 28 August 2026
The Ivan Giotto is a double-sided mod made by FPSB modder VoreTex. It was made for VicGotGame for his project: "X incipiens stabilus"[1].
Construction
Parts needed
Parts list from the video below:
- x2 Giotto Turbo Maxi (2 bodies, 2 back plugs)
- x2 Pilot Dr. Grip (grips; optional: fronts)
- x2 O-ring
- x2 Decorative grips (original use base of Z-grip and 4 O-rings for 1 side)
- x2 Archery bullet tips
=Additional items
- Tape
Text tutorial
Preparation
- Cut the front and disassemble both Giotto barrels.
- Cut the Giotto back plug from the ring.
- Cut one of the two Giotto bodies in half.
- Cut both Dr. Grip grips in half and optionally cut the front to roughly the same size as the 2 Archery bullet tips
Assembly
- Put one Giotto back plug in each hole of the uncut Giotto body.
- Add one O-ring on each back plug and connect the two halves of the cut Giotto barrel. (tape might be necessary to hold the parts well)
- Add some tape around the Archery bullet tip (connect with the Dr. Grip front, this should prevent the tips from falling).
- Put the Archery bullet tip in the Ivan Giotto base, it should fit snugly.
- Add the decorative grip, then add one half of a Dr. Grip grip.
- Repeat on the other side.
Video tutorial
Video tutorial by VoreTex.