Variegated Amaryllis

The Variegated Amaryllis is a double-sided mod made by FPSB modder Vore-tex. This mod was made for Akai as a commission, the name having the initials of both spinners.

Construction

Parts needed

List from the video below:

• 2x Pentel Hybrid Gel Grip (tips)
• 1x Nitoms Stalogy (1 body)
• 1x Pilot G2 (grip)
• 2x Pilot Dr. Grip (grips and metal rings)
• 2x Dong-A Computer Sign Pen (2 backplug)
• 2x Pentel Color Twin (big caps)
• 1x Zebra Tect 2way (2 o-ring)
• 2x Dong-A Anyball (grips)
• 2x Sailor Needle line (grips)
  • Can be subbed by Bic gelocity grip.
• 4x mechanical keyboard o-ring

Text tutorial

Preparation

1. Cut both Dr.grip grip to 3cm (lip side).
2. Cut the base of the CT cap and sand the cut to create a round edge.
3. Cut 4x 2 blocks of G2.
4. Cut 2x 6 blocks from the center of the Anyball grip (2 stripes past the extremity with the big ring).
5. Cut both 6 blocks of Anyball grip in length and make it 2.5cm (length wise)
6. Cut the lip of the Stalogy barrel.
7. Cut the big part from the Comssa backplugs.
8. Cut at the middle of the stripes of the Sailor needle line grips (keep the smaller part).

Assembly

1. In this order, put on the CT cap: 2 Keyboard O-rings, 2 blocks of G2 grips, and 3cm of Dr.grip grip.
2. Roll the Anyball grip and push it inside the Dr.grip grip.
3. Push the HGG tip inside the Anyball grip.
4. Put the Dr.grip metallic ring inside the Dr.grip grip.
5. put the Sailor needle line grip on the big part of the Comssa backplug.
6. Put the Comssa backplug (side with the grip) inside the CT cap.
7. Add a Tect ring on the Comssa backplug.
8. Repeat on the other cap and connect it to the Stalogy barrel.

Video tutorial

Video tutorial by Vore-tex.