A13x Bullet Mod: Difference between revisions
From Fen Spinner Wiki
More actions
No edit summary |
m Copyedit: spelling and grammar |
||
| Line 8: | Line 8: | ||
|cog=? | |cog=? | ||
}} | }} | ||
The '''A13x Bullet Mod''' | The '''A13x Bullet Mod''' was [[A13x]]'s main mod during his 2013 era. A13x refers to it as "ABM." | ||
The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originally created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mod remain a mystery (the tips in particular). | The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originally created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mod remain a mystery (the tips in particular). | ||
| Line 16: | Line 16: | ||
===Parts needed=== | ===Parts needed=== | ||
List from A13x's | List from A13x's summary video<ref>[https://www.youtube.com/watch?v=TXpMidPvw0E A13x's sum up video]</ref> | ||
* 2x [[Pilot Dr. Grip]]（Grip） | * 2x [[Pilot Dr. Grip]]（Grip） | ||
* 1x Old [[Giotto Turbo Maxi]] ( | * 1x Old [[Giotto Turbo Maxi]] (body) | ||
* 1x Old big [[Velleda White Board Marker]] (cap) | * 1x Old big [[Velleda White Board Marker]] (cap) | ||
* 1x Old [[Papermate Super Magic +]] (Body) | * 1x Old [[Papermate Super Magic +]] (Body) | ||
| Line 27: | Line 27: | ||
* 2x ~0.5cm stripe of grips | * 2x ~0.5cm stripe of grips | ||
* 1x ~0.7cm flat grip | * 1x ~0.7cm flat grip | ||
* 2x Secret tips ( | * 2x Secret tips (one silver and one gold) | ||
====Additional Items==== | ====Additional Items==== | ||
* Celo tape and | * Celo tape and electrical tape | ||
===Text tutorial=== | ===Text tutorial=== | ||
# Cut ~3.45 cm of the Velleda cap. | # Cut ~3.45 cm of the Velleda cap. | ||
# Disassemble the old Giotto and cut the front until it | # Disassemble the old Giotto and cut the front until it is ~1 cm | ||
# Cut ~4 cm of the old Super Magic+ body. | # Cut ~4 cm of the old Super Magic+ body. | ||
# Cut both of your Dr. Grip grips in half, keeping the flat side. | # Cut both of your Dr. Grip grips in half, keeping the flat side. | ||
# Cut | # Cut three sections of G2 grip: one with four stripes, one with two stripes, and one with one stripe. | ||
# Put the golden secret tip inside the Edding cap (you may need to clear the interior beforehand). | # Put the golden secret tip inside the Edding cap (you may need to clear the interior beforehand). | ||
# Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Dr. Grip grip. | # Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Dr. Grip grip. | ||
Latest revision as of 12:41, 27 August 2026
The A13x Bullet Mod was A13x's main mod during his 2013 era. A13x refers to it as "ABM."
The mod was made popular when A13x used it in Pen Spinning World Tournament 2013. This mod was originally created as a heavy version of a Black Bonkura KT. As of today, some parts of the mod remain a mystery (the tips in particular).
Construction
Parts needed
List from A13x's summary video[1]
- 2x Pilot Dr. Grip（Grip）
- 1x Old Giotto Turbo Maxi (body)
- 1x Old big Velleda White Board Marker (cap)
- 1x Old Papermate Super Magic + (Body)
- 1x Edding 661 (cap)
- 1x Pilot G2 (Grip)
- 1x ~1cm section of dimpled grip
- 2x ~0.5cm stripe of grips
- 1x ~0.7cm flat grip
- 2x Secret tips (one silver and one gold)
Additional Items
- Celo tape and electrical tape
Text tutorial
- Cut ~3.45 cm of the Velleda cap.
- Disassemble the old Giotto and cut the front until it is ~1 cm
- Cut ~4 cm of the old Super Magic+ body.
- Cut both of your Dr. Grip grips in half, keeping the flat side.
- Cut three sections of G2 grip: one with four stripes, one with two stripes, and one with one stripe.
- Put the golden secret tip inside the Edding cap (you may need to clear the interior beforehand).
- Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Dr. Grip grip.
- Add these grips on the Velleda cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of G2 grip, and the last flat side of Dr. Grip grip.
- Put the silver secret tip inside the Velleda cap.
- Add ~1 round of black electrical tape on the thinner side of the Super Magic+ body.
- Add 1 stripe of G2 grip on the front of the old Giotto, and add cello tape on the rest of the front.
- Put the thick side of the Super Magic+ body inside the back of the old Giotto barrel.
- Connect the Edding cap on the remaining Super Magic+.
- Connect the old Velleda cap on the front of the old Giotto barrel.