Ivan Giotto: Difference between revisions
From Fen Spinner Wiki
More actions
mNo edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 15: | Line 15: | ||
List from the video below | List from the video below | ||
* x2 [[Giotto Turbo Maxi]] (2 body, 2 backplugs) | * x2 [[Giotto Turbo Maxi]] (2 body, 2 backplugs) | ||
* x2 [[Pilot Dr.Grip]] (Grips) (facultative: fronts) | * x2 [[Pilot Dr. Grip]] (Grips) (facultative: fronts) | ||
* x2 O-ring | * x2 O-ring | ||
* x2 Decorative grips (original use base of [[Z-grip]] and 4 o-ring for 1 side) | * x2 Decorative grips (original use base of [[Z-grip]] and 4 o-ring for 1 side) | ||
| Line 24: | Line 24: | ||
===Text tutorial=== | ===Text tutorial=== | ||
====Preparation==== | ====Preparation==== | ||
# Cut the front and | # Cut the front and disassemble both Giotto barrels. | ||
# Cut the Giotto backplug from the ring | # Cut the Giotto backplug from the ring | ||
# Cut 1 of the 2 Giotto | # Cut 1 of the 2 Giotto bodies in half. | ||
# Cut the 2 Dr.Grip grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips | # Cut the 2 Dr.Grip grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips | ||
====Assembly==== | ====Assembly==== | ||
# Put one giotto backplug in each hole of the uncuted Giotto body | # Put one giotto backplug in each hole of the uncuted Giotto body. | ||
# Add one O-ring on each backplug, connect the 2 | # Add one O-ring on each backplug, and connect the 2 halves of the cut Giotto barrel. (tape might be necessary to hold the parts well) | ||
# Add some tape around the Archery bullet tip (connect with the Dr.Grip front, this should prevent the tips from falling) | # Add some tape around the Archery bullet tip (connect with the Dr.Grip front, this should prevent the tips from falling). | ||
# Put the Archery bullet tip in the Ivan giotto base, it should fit | # Put the Archery bullet tip in the Ivan giotto base, it should fit snugly. | ||
# Add the Decorative grip then add one half of Dr.Grip | # Add the Decorative grip then add one half of Dr.Grip grip. | ||
# Repeat on the other side | # Repeat on the other side. | ||
===Video tutorial=== | ===Video tutorial=== | ||
Latest revision as of 21:15, 10 March 2025
The Ivan Giotto is a double sided mod made by FPSB modder, VoreTex. It was made for VicGotGame for his project: "X incipiens stabilus"[1].
Construction
Parts needed
List from the video below
- x2 Giotto Turbo Maxi (2 body, 2 backplugs)
- x2 Pilot Dr. Grip (Grips) (facultative: fronts)
- x2 O-ring
- x2 Decorative grips (original use base of Z-grip and 4 o-ring for 1 side)
- x2 Archery bullet tips
Additional Items
- Tape
Text tutorial
Preparation
- Cut the front and disassemble both Giotto barrels.
- Cut the Giotto backplug from the ring
- Cut 1 of the 2 Giotto bodies in half.
- Cut the 2 Dr.Grip grips in half and (facultative) cut the front to roughly the same size as the 2 Archery bullet tips
Assembly
- Put one giotto backplug in each hole of the uncuted Giotto body.
- Add one O-ring on each backplug, and connect the 2 halves of the cut Giotto barrel. (tape might be necessary to hold the parts well)
- Add some tape around the Archery bullet tip (connect with the Dr.Grip front, this should prevent the tips from falling).
- Put the Archery bullet tip in the Ivan giotto base, it should fit snugly.
- Add the Decorative grip then add one half of Dr.Grip grip.
- Repeat on the other side.
Video tutorial
Video tutorial by VoreTex.