A13x Bullet Mod (Vore-tex ver.): Difference between revisions

Latest revision as of 19:21, 5 March 2025

The A13x Bullet Mod (Vore-tex ver.) is a revision of the popular A13x Bullet Mod using archery bullet tips and recent versions of the old parts.

Construction

Parts needed

List from the video bellow:

1x Pilot Dr. Grip（Grip）
1x Giotto Turbo Maxi (Body)
1x big Veleda White Board Marker (cap)
1x Pentel Color Twin (Small cap)
1x Edding 661 (cap)
1x Pilot SuperGrip (Grip)
1x Pentel RSVP (Grip)
2x Archery bullet tips

Additional Items

Cello tape and Electrical tape

Text tutorial

Assembly

Preparation

Cut ~3.3 cm of the Velleda cap.
Disassemble the Giotto and cut the front until it's ~1cm
Cut your Dr. Grip grip into 2x 2cm sections.
Cut your RSVP grip 2 times: 1 to separate the o-ring and another one at 2/3 of the grip (one part is slightly longer than the other).
Cut 2 sections of SuperGrip grip, 1x 4 stripes and 1x 2 stripes.

Front side

Put the bullet tips inside the Edding cap (some tape might be necessary).
Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the smaller section of RSVP grip, and one side of Dr. Grip grip.
Connect the Edding cap on the Color Twin small cap.

Back side

Add these grips on the Velleda cap following this order: the longer section of RSVP grip turned inside out, 2 sections of SuperGrip grip, and the last side of Dr. Grip grip.
Put the bullet tips inside the Velleda cap (tape might be necessary to avoid rattling).
Add your RSVP o-ring on the front of the Giotto, and add cello tape on the rest of the front.
Put the Color Twin small cap inside the back of the Giotto barrel.
Connect the old Velleda cap on the front of the old Giotto barrel.

Video tutorial

Video tutorial by VORE-TEX.

References

@@ Line 8: / Line 8: @@
 |cog=?
 }}
-The '''A13x Bullet Mod (Vore-tex ver.)''' is a revision of the popular [[A13x Bullet Mod]] using archery bullet tips and recent version of the old parts.
+The '''A13x Bullet Mod (Vore-tex ver.)''' is a revision of the popular [[A13x Bullet Mod]] using archery bullet tips and recent versions of the old parts.
 ==Construction==
@@ Line 14: / Line 14: @@
 ===Parts needed===
-List from Vore-Tex's video tutorial video<ref>[https://www.youtube.com/watch?v=1XVb3HmdWTw Vore-Tex's video tutorial]</ref>
+List from the video bellow:
 * 1x [[Pilot Dr. Grip]]（Grip）
@@ Line 25: / Line 25: @@
 * 2x [[Archery bullet tips]]
 ====Additional Items====
-* Celo tape and Electrical tape
+* Cello tape and Electrical tape
 ===Text tutorial===
-# Cut ~3.3 cm of the [[Veleda White Board Marker]] cap
-# Dissasemble the [[Giotto Turbo Maxi]] and cut the front until it's ~1cm
+====Assembly====
-# Cut your [[Pilot Dr. Grip]] grip in 2x 2cm section.
-# Cut your [[Pentel RSVP]] grip 2 times: 1 to separate the o-ing and another one at 2/3 of the grip (one part is slightly longer than the other)
+====Preparation====
-# Cut 2 section of [[Pilot SuperGrip]] grip, 1x 4 stripes and 1x 2 stripes
+# Cut ~3.3 cm of the Velleda cap.
-# Put the [[Archery bullet tips]] inside the [[Edding 661]] cap (Some tape might be necessary)
+# Disassemble the Giotto and cut the front until it's ~1cm
-# Add these grips on the [[Edding 661]] folowing this order: 4 stripes of [[Pilot G2]] grip, the smaller section of [[Pentel RSVP]] grip and one side of [[Pilot Dr. Grip]] grip.
+# Cut your Dr. Grip grip into 2x 2cm sections.
-# Add these grips on the [[Veleda White Board Marker]] cap folowing this order: the longer section of [[Pentel RSVP]] grip turned inside out, 2 section of [[Pilot SuperGrip]] grip and the last side of [[Pilot Dr. Grip]] grip.
+# Cut your RSVP grip 2 times: 1 to separate the o-ring and another one at 2/3 of the grip (one part is slightly longer than the other).
-# Put the [[Archery bullet tips]] inside the [[Veleda White Board Marker]] cap (Tape might be necessary to avoid rattleing)
+# Cut 2 sections of SuperGrip grip, 1x 4 stripes and 1x 2 stripes.
-# Add your [[Pentel RSVP]] o-ring on the front of the [[Giotto Turbo Maxi]], add celo tape on the rest of front
-# Put the [[Pentel Color Twin]] small cap inside the back of the [[Giotto Turbo Maxi]] barrel
+=====Front side=====
-# Connect the [[Edding 661]] cap on the [[Pentel Color Twin]] small cap.
+# Put the bullet tips inside the Edding cap (some tape might be necessary).
-# Connect the Old [[Veleda White Board Marker]] cap on the front of the old [[Giotto Turbo Maxi]] barrel
+# Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the smaller section of RSVP grip, and one side of Dr. Grip grip.
+# Connect the Edding cap on the Color Twin small cap.
+=====Back side=====
+# Add these grips on the Velleda cap following this order: the longer section of RSVP grip turned inside out, 2 sections of SuperGrip grip, and the last side of Dr. Grip grip.
+# Put the bullet tips inside the Velleda cap (tape might be necessary to avoid rattling).
+# Add your RSVP o-ring on the front of the Giotto, and add cello tape on the rest of the front.
+# Put the Color Twin small cap inside the back of the Giotto barrel.
+# Connect the old Velleda cap on the front of the old Giotto barrel.
 ===Video tutorial===