Dark Mod Zero - Revision history

Orctupus at 00:44, 20 October 2024

2024-10-20T00:44:30Z

← Older revision		Revision as of 00:44, 20 October 2024
Line 8:		Line 8:
	\|cog= COP		\|cog= COP
	}}		}}
	The '''Dark Mod Zero''' is a personal mod made by spinner ~~Orctupus~~ [https://www.youtube.com/@Orctupus Orctupus YouTube].		The '''Dark Mod Zero''' is a personal mod made by spinner [https://www.youtube.com/@Orctupus Orctupus YouTube]. It features a soft-gripped body similar to the [[Papermate Flexgrip Ultra]] that has the ability to grip the hand but still slip efficiently. This balance leads to a unique spinning experience with spinners who want a bit more control compared to traditional plastic lacquers found on most pens and markers.

	==Construction==		==Construction==

Orctupus: /* Text tutorial */

2024-10-20T00:38:27Z

Text tutorial

← Older revision		Revision as of 00:38, 20 October 2024
Line 29:		Line 29:

	===Text tutorial===		===Text tutorial===
	1 Disassemble the [[Pentel Energel Kuro]] pens by unscrewing the tips (Set aside), removing the metal ring, ink-tube, breaking the clip, and popping out the back of the retractable clicker mechanism through the lower square hole leaving only the bodies.		* Disassemble the [[Pentel Energel Kuro]] pens by unscrewing the tips (Set aside), removing the metal ring, ink-tube, breaking the clip, and popping out the back of the retractable clicker mechanism through the lower square hole leaving only the bodies.

	2 Measure and cut the [[Pentel Energel Kuro]] bodies 1cm from the back of the pen (clicker mechanism side) using a utility knife or pipe-cutter. Once both body's are cut, set aside.		* Measure and cut the [[Pentel Energel Kuro]] bodies 1cm from the back of the pen (clicker mechanism side) using a utility knife or pipe-cutter. Once both body's are cut, set aside.

	#3 Disassemble the [[Papermate Officemate]] removing the front plug and ink-tube leaving only the barrel.		* Disassemble the [[Papermate Officemate]] removing the front plug and ink-tube leaving only the barrel.

	4 Measure and cut the [[Papermate Officemate]] barrel 3.2cm from the front of the pen (Set aside).		* Measure and cut the [[Papermate Officemate]] barrel 3.2cm from the front of the pen (Set aside).
	#6 Disassemble the [[TUL Ballpoint Retractable]] pens removing the front tip, metal ring, ink-tube, and set aside the Grips.		* Disassemble the [[TUL Ballpoint Retractable]] pens removing the front tip, metal ring, ink-tube, and set aside the Grips.
			* Disassemble the [[Pilot G2]] pens removing only the grips and set aside

	~~#7 Disassemble~~ the [[~~Pilot G2~~]] ~~pens removing only the~~ grips ~~and set~~ aside		* Cut 2x 8-Sections of Grip from two of the [[Papermate profile \| Dong-a Anyball]] grips. Set aside.

	8 Cut 2x 8-Sections of Grip from ~~two~~ of the [[Papermate profile \| Dong-a Anyball]] ~~grips~~. Set aside.		* Cut 2x 4-Sections of Grip from one of the [[Papermate profile \| Dong-a Anyball]] grip. Set aside

	~~9 Cut 2x 4-Sections of Grip from one of~~ the [[~~Papermate profile \| Dong-a Anyball~~]] ~~grip~~. Set aside		* Stretch the [[Pilot G2]] Grips using a pliers. Set aside.

	~~10 Stretch~~ the [[~~Pilot G2~~]] ~~Grips using a pliers. Set aside~~.		* Wrap 2x the [[9/32 - 5/16th Screw-in Target Point]] tips with Painters Tape or Paper Tape around the base until they can be placed snug into the [[Pentel Energel Kuro]] front barrel (threaded side).

	~~11 Wrap 2x~~ the [[9/32 - 5/16th Screw-in Target Point]] tips ~~with Painters Tape or Paper Tape around the base until they can be placed snug into~~ the [[~~Pentel Energel Kuro~~]] ~~front~~ barrel (~~threaded side~~).		* Place the [[Pentel Energel Kuro]] tips loosely over the [[9/32 - 5/16th Screw-in Target Point]] tips and then push the [[TUL Ballpoint Retractable]] grip over both the tips and onto the barrel. (there will be a slight bump on the inner 1/3rd of the TUL grip.)

	~~12 Place~~ the [[~~Pentel Energel Kuro~~]] ~~tips loosely~~ over the [[~~9/32 - 5/16th Screw-in Target Point~~]] ~~tips and then push~~ the [[~~TUL Ballpoint Retractable~~]] ~~grip over both the tips~~ and ~~onto the barrel. (~~there ~~will be a slight bump on the inner 1/3rd~~ of the TUL grip.)		* Stretch the [[Pilot G2]] Grip up and over the [[TUL Ballpoint Retractable]] Grip with the G2 rings facing outwards till the [[Pentel Energel Kuro]] tip is only seen about 2-3mm and there is 2-3mm of the TUL grip showing on the other side.

	~~13 Stretch~~ the [[~~Pilot G2~~]] ~~Grip up and over~~ the [[~~TUL Ballpoint Retractable~~]] ~~Grip with~~ the ~~G2 rings facing outwards till~~ the [[~~Pentel Energel Kuro~~]] ~~tip is only seen about 2-3mm and there is 2-3mm of the TUL grip showing on the other side~~.		* Place the 2x 8-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the other side of each [[Pentel Energel Kuro]] barrel. You want to have a flat section facing inwards vs the smooth thinner end on the inside. Slide it up against the [[Pilot G2]] Grip.

	14 Place the 2x 8-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the ~~other~~ side of ~~each [[Pentel Energel Kuro]] barrel. You want to have a flat section facing inwards vs the smooth thinner end on the inside. Slide it up against~~ the [[Pilot G2]] ~~Grip~~.		* Place the 2x 4-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the ring side of the [[Pilot G2]] grip on each side.

	~~15 Place~~ the ~~2x 4-Sections of~~ [[Papermate ~~profile \| Dong-a Anyball~~]] ~~grips on the ring side of~~ the [[~~Pilot G2~~]] ~~grip on each side~~.		* Use the [[Papermate Officemate]] 3.2cm cut body section to join the [[Pentel Energel Kuro]] Barrels and then put both sides together press-fit over the officemate section.

	~~16 Use the [[Papermate Officemate]] 3.2cm cut body section to join the [[Pentel Energel Kuro]] Barrels and then put both sides together press-fit over the officemate section.~~		* FINISHED

	17 FINISHED

	====Assembly====		====Assembly====

Orctupus: /* Text tutorial */

2024-10-20T00:37:25Z

Text tutorial

Orctupus: /* Text tutorial */

2024-10-20T00:36:59Z

Text tutorial

Orctupus: /* Text tutorial */

2024-10-20T00:36:06Z

Text tutorial

← Older revision		Revision as of 00:36, 20 October 2024
Line 45:		Line 45:
	# Cut 2x 4-Sections of Grip from one of the [[Papermate profile \| Dong-a Anyball]] grip. Set aside		# Cut 2x 4-Sections of Grip from one of the [[Papermate profile \| Dong-a Anyball]] grip. Set aside

	# Stretch the [[Pilot G2]] Grips using a pliers.		# Stretch the [[Pilot G2]] Grips using a pliers. Set aside.

	# Wrap 2x the [[9/32 - 5/16th Screw-in Target Point]] tips with Painters Tape or Paper Tape around the base until they can be placed snug into the [[Pentel Energel Kuro]] front barrel (threaded side).		# Wrap 2x the [[9/32 - 5/16th Screw-in Target Point]] tips with Painters Tape or Paper Tape around the base until they can be placed snug into the [[Pentel Energel Kuro]] front barrel (threaded side).

	# ~~TO BE CONTINUED~~...		# Place the [[Pentel Energel Kuro]] tips loosely over the [[9/32 - 5/16th Screw-in Target Point]] tips and then push the [[TUL Ballpoint Retractable]] grip over both the tips and onto the barrel. (there will be a slight bump on the inner 1/3rd of the TUL grip.)

			# Stretch the [[Pilot G2]] Grip up and over the [[TUL Ballpoint Retractable]] Grip with the G2 rings facing outwards till the [[Pentel Energel Kuro]] tip is only seen about 2-3mm and there is 2-3mm of the TUL grip showing on the other side.

			# Place the 2x 8-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the other side of each [[Pentel Energel Kuro]] barrel. You want to have a flat section facing inwards vs the smooth thinner end on the inside. Slide it up against the [[Pilot G2]] Grip.

			# Place the 2x 4-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the ring side of the [[Pilot G2]] grip on each side.

			# Use the [[Papermate Officemate]] 3.2cm cut body section to join the [[Pentel Energel Kuro]] Barrels and then put both sides together press-fit over the officemate section.

			# FINISHED

	====Assembly====		====Assembly====
	!!! IN PROGRESS !!!		!!! IN PROGRESS !!!

	===Video Tutorial===		===Video Tutorial===
	!!! COMING SOON !!!		!!! COMING SOON !!!

Orctupus: This is a tutorial for creating the Dark Mod Zero mod by Orctupus

2024-10-19T17:38:25Z

This is a tutorial for creating the Dark Mod Zero mod by Orctupus

New page

{{Mod Infobox
|name=Dark Mod Zero
|image=DARKMOD ZERO FAR.jpg
|creator= Orctupus
|style= [[Double Sided]]
|length= 25.6cm
|weight= 30g
|cog= COP
}}
The '''Dark Mod Zero''' is a personal mod made by spinner Orctupus [https://www.youtube.com/@Orctupus Orctupus YouTube].

==Construction==

===Parts needed===
Source: Directly Published here by Orctupus
[[File:DARKMOD_ZERO_MATERIALS.jpg|thumb|200px]]
* 2x [[9/32 - 5/16th Screw-in Target Point]] (Tip)
* 2x [[Pentel Energel Kuro]] (Body)
* 2x [[Pilot G2]] (Grip)
* 2x [[TUL Ballpoint Retractable]] (Grip)
* 3x [[Papermate Profile | Dong-a Anyball]] (Grip)
* 1x [[Papermate Officemate]] (Barrel)

====Additional Items====
* Painters Tape | Paper Tape
* Utility Knife
* OPTIONAL: Pipe-Cutter
* Scissor End | Thin Metal Rod (To push the Energel Kuro Clicker housing out of the body)

===Text tutorial===
# Disassemble the [[Pentel Energel Kuro]] pens by unscrewing the tips (Set aside), removing the metal ring, ink-tube, breaking the clip, and popping out the back of the retractable clicker mechanism through the lower square hole leaving only the bodies.

# Measure and cut the [[Pentel Energel Kuro]] bodies 1cm from the back of the pen (clicker mechanism side) using a utility knife or pipe-cutter. Once both body's are cut, set aside.

# Disassemble the [[Papermate Officemate]] removing the front plug and ink-tube leaving only the barrel.

# Measure and cut the [[Papermate Officemate]] barrel 3.2cm from the front of the pen (Set aside).

# Disassemble the [[TUL Ballpoint Retractable]] pens removing the front tip, metal ring, ink-tube, and set aside the Grips.

# Disassemble the [[Pilot G2]] pens removing only the grips and set aside

# Cut 2x 8-Sections of Grip from two of the [[Papermate profile | Dong-a Anyball]] grips. Set aside.

# Cut 2x 4-Sections of Grip from one of the [[Papermate profile | Dong-a Anyball]] grip. Set aside

# Stretch the [[Pilot G2]] Grips using a pliers.

# Wrap 2x the [[9/32 - 5/16th Screw-in Target Point]] tips with Painters Tape or Paper Tape around the base until they can be placed snug into the [[Pentel Energel Kuro]] front barrel (threaded side).

# TO BE CONTINUED...

====Assembly====
!!! IN PROGRESS !!!
===Video Tutorial===
!!! COMING SOON !!!

==References==
<references />

[[Category:Pen Mods]]]

← Older revision		Revision as of 00:37, 20 October 2024
Line 29:		Line 29:

	===Text tutorial===		===Text tutorial===
	#1 Disassemble the [[Pentel Energel Kuro]] pens by unscrewing the tips (Set aside), removing the metal ring, ink-tube, breaking the clip, and popping out the back of the retractable clicker mechanism through the lower square hole leaving only the bodies.		1 Disassemble the [[Pentel Energel Kuro]] pens by unscrewing the tips (Set aside), removing the metal ring, ink-tube, breaking the clip, and popping out the back of the retractable clicker mechanism through the lower square hole leaving only the bodies.

	#2 Measure and cut the [[Pentel Energel Kuro]] bodies 1cm from the back of the pen (clicker mechanism side) using a utility knife or pipe-cutter. Once both body's are cut, set aside.		2 Measure and cut the [[Pentel Energel Kuro]] bodies 1cm from the back of the pen (clicker mechanism side) using a utility knife or pipe-cutter. Once both body's are cut, set aside.

	#3 Disassemble the [[Papermate Officemate]] removing the front plug and ink-tube leaving only the barrel.		#3 Disassemble the [[Papermate Officemate]] removing the front plug and ink-tube leaving only the barrel.

	#4 Measure and cut the [[Papermate Officemate]] barrel 3.2cm from the front of the pen (Set aside).		4 Measure and cut the [[Papermate Officemate]] barrel 3.2cm from the front of the pen (Set aside).

	#6 Disassemble the [[TUL Ballpoint Retractable]] pens removing the front tip, metal ring, ink-tube, and set aside the Grips.		#6 Disassemble the [[TUL Ballpoint Retractable]] pens removing the front tip, metal ring, ink-tube, and set aside the Grips.

	#7 Disassemble the [[Pilot G2]] pens removing only the grips and set aside		#7 Disassemble the [[Pilot G2]] pens removing only the grips and set aside

	#8 Cut 2x 8-Sections of Grip from two of the [[Papermate profile \| Dong-a Anyball]] grips. Set aside.		8 Cut 2x 8-Sections of Grip from two of the [[Papermate profile \| Dong-a Anyball]] grips. Set aside.

	#9 Cut 2x 4-Sections of Grip from one of the [[Papermate profile \| Dong-a Anyball]] grip. Set aside		9 Cut 2x 4-Sections of Grip from one of the [[Papermate profile \| Dong-a Anyball]] grip. Set aside

	#10 Stretch the [[Pilot G2]] Grips using a pliers. Set aside.		10 Stretch the [[Pilot G2]] Grips using a pliers. Set aside.

	#11 Wrap 2x the [[9/32 - 5/16th Screw-in Target Point]] tips with Painters Tape or Paper Tape around the base until they can be placed snug into the [[Pentel Energel Kuro]] front barrel (threaded side).		11 Wrap 2x the [[9/32 - 5/16th Screw-in Target Point]] tips with Painters Tape or Paper Tape around the base until they can be placed snug into the [[Pentel Energel Kuro]] front barrel (threaded side).

	#12 Place the [[Pentel Energel Kuro]] tips loosely over the [[9/32 - 5/16th Screw-in Target Point]] tips and then push the [[TUL Ballpoint Retractable]] grip over both the tips and onto the barrel. (there will be a slight bump on the inner 1/3rd of the TUL grip.)		12 Place the [[Pentel Energel Kuro]] tips loosely over the [[9/32 - 5/16th Screw-in Target Point]] tips and then push the [[TUL Ballpoint Retractable]] grip over both the tips and onto the barrel. (there will be a slight bump on the inner 1/3rd of the TUL grip.)

	#13 Stretch the [[Pilot G2]] Grip up and over the [[TUL Ballpoint Retractable]] Grip with the G2 rings facing outwards till the [[Pentel Energel Kuro]] tip is only seen about 2-3mm and there is 2-3mm of the TUL grip showing on the other side.		13 Stretch the [[Pilot G2]] Grip up and over the [[TUL Ballpoint Retractable]] Grip with the G2 rings facing outwards till the [[Pentel Energel Kuro]] tip is only seen about 2-3mm and there is 2-3mm of the TUL grip showing on the other side.

	#14 Place the 2x 8-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the other side of each [[Pentel Energel Kuro]] barrel. You want to have a flat section facing inwards vs the smooth thinner end on the inside. Slide it up against the [[Pilot G2]] Grip.		14 Place the 2x 8-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the other side of each [[Pentel Energel Kuro]] barrel. You want to have a flat section facing inwards vs the smooth thinner end on the inside. Slide it up against the [[Pilot G2]] Grip.

	#15 Place the 2x 4-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the ring side of the [[Pilot G2]] grip on each side.		15 Place the 2x 4-Sections of [[Papermate profile \| Dong-a Anyball]] grips on the ring side of the [[Pilot G2]] grip on each side.

	#16 Use the [[Papermate Officemate]] 3.2cm cut body section to join the [[Pentel Energel Kuro]] Barrels and then put both sides together press-fit over the officemate section.		16 Use the [[Papermate Officemate]] 3.2cm cut body section to join the [[Pentel Energel Kuro]] Barrels and then put both sides together press-fit over the officemate section.

	#17 FINISHED		17 FINISHED

	====Assembly====		====Assembly====