A13x Bullet Mod - Revision history

V 0 1 D at 16:57, 11 December 2024

2024-12-11T16:57:40Z

← Older revision		Revision as of 16:57, 11 December 2024
Line 31:		Line 31:
	* Celo tape and Electrical tape		* Celo tape and Electrical tape
	===Text tutorial===		===Text tutorial===
	# Cut ~3.45 cm of the [[Velleda ~~White Board Marker]]~~ cap.		# Cut ~3.45 cm of the Velleda cap.
	# Disassemble the old [[Giotto ~~Turbo Maxi]]~~ and cut the front until it's ~1cm		# Disassemble the old Giotto and cut the front until it's ~1cm
	# Cut ~4 cm of the old ~~[[Papermate~~ Super Magic +]] body.		# Cut ~4 cm of the old Super Magic+ body.
	# Cut both of your ~~[[Pilot~~ Dr. Grip]] grips in half, keeping the flat side.		# Cut both of your Dr. Grip grips in half, keeping the flat side.
	# Cut 3 sections of ~~[[Pilot~~ G2]] grip, 1x 4 stripes, 1x 2 stripes, and 1x 1 stripe.		# Cut 3 sections of G2 grip, 1x 4 stripes, 1x 2 stripes, and 1x 1 stripe.
	# Put the golden secret tip inside the [[Edding ~~661]]~~ cap (you may need to clear the interior beforehand).		# Put the golden secret tip inside the Edding cap (you may need to clear the interior beforehand).
	# Add these grips on the [[Edding ~~661]]~~ following this order: 4 stripes of ~~[[Pilot~~ G2]] grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of ~~[[Pilot~~ Dr. Grip]] grip.		# Add these grips on the Edding cap following this order: 4 stripes of G2 grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of Dr. Grip grip.
	# Add these grips on the ~~[[Veleda White Board Marker]]~~ cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of ~~[[Pilot~~ G2]] grip, and the last flat side of ~~[[Pilot~~ Dr. Grip]] grip.		# Add these grips on the Velleda cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of G2 grip, and the last flat side of Dr. Grip grip.
	# Put the silver secret tip inside the [[Velleda ~~White Board Marker]]~~ cap.		# Put the silver secret tip inside the Velleda cap.
	# Add ~1 round of black electrical tape on the thinner side of the ~~[[Papermate~~ Super Magic +]] body.		# Add ~1 round of black electrical tape on the thinner side of the Super Magic+ body.
	# Add 1 stripe of ~~[[Pilot~~ G2]] grip on the front of the old [[Giotto ~~Turbo Maxi]]~~, and add cello tape on the rest of the front.		# Add 1 stripe of G2 grip on the front of the old Giotto, and add cello tape on the rest of the front.
	# Put the thick side of the ~~[[Papermate~~ Super Magic +]] body inside the back of the old [[Giotto ~~Turbo Maxi]]~~ barrel.		# Put the thick side of the Super Magic+ body inside the back of the old Giotto barrel.
	# Connect the [[Edding ~~661]]~~ cap on the remaining ~~[[Papermate~~ Super Magic +]].		# Connect the Edding cap on the remaining Super Magic+.
	# Connect the old [[Velleda ~~White Board Marker]]~~ cap on the front of the old [[Giotto ~~Turbo Maxi]]~~ barrel.		# Connect the old Velleda cap on the front of the old Giotto barrel.
	==References==		==References==

	[[Category:Pen Mods]]		[[Category:Pen Mods]]

V 0 1 D at 16:23, 11 December 2024

2024-12-11T16:23:03Z

← Older revision		Revision as of 16:23, 11 December 2024
Line 8:		Line 8:
	\|cog=?		\|cog=?
	}}		}}
	The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era. A13x himself calls it: "~~ABM"~~		The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era. A13x himself calls it: "ABM”.

	The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was ~~originaly~~ created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the ~~mods~~ remain a mystery (the tips in particular).		The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originally created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mod remain a mystery (the tips in particular).

	==Construction==		==Construction==
Line 20:		Line 20:
	* 2x [[Pilot Dr. Grip]]（Grip）		* 2x [[Pilot Dr. Grip]]（Grip）
	* 1x Old [[Giotto Turbo Maxi]] (Body)		* 1x Old [[Giotto Turbo Maxi]] (Body)
	* 1x Old big [[~~Veleda~~ White Board Marker]] (cap)		* 1x Old big [[Velleda White Board Marker]] (cap)
	* 1x Old [[Papermate Super Magic +]] (Body)		* 1x Old [[Papermate Super Magic +]] (Body)
	* 1x [[Edding 661]] (cap)		* 1x [[Edding 661]] (cap)
Line 31:		Line 31:
	* Celo tape and Electrical tape		* Celo tape and Electrical tape
	===Text tutorial===		===Text tutorial===
	# Cut ~3.45 cm of the [[~~Veleda~~ White Board Marker]] cap		# Cut ~3.45 cm of the [[Velleda White Board Marker]] cap.
	# ~~Dissasemble~~ the old [[Giotto Turbo Maxi]] and cut the front until it's ~1cm		# Disassemble the old [[Giotto Turbo Maxi]] and cut the front until it's ~1cm
	# Cut ~4 cm of the old [[Papermate Super Magic +]] body		# Cut ~4 cm of the old [[Papermate Super Magic +]] body.
	# Cut both of your [[Pilot Dr. Grip]] grips in half, ~~keep~~ the flat side		# Cut both of your [[Pilot Dr. Grip]] grips in half, keeping the flat side.
	# Cut 3 ~~section~~ of [[Pilot G2]] grip, 1x 4 stripes, 1x 2 stripes and 1x 1 stripe		# Cut 3 sections of [[Pilot G2]] grip, 1x 4 stripes, 1x 2 stripes, and 1x 1 stripe.
	# Put the golden secret tip inside the [[Edding 661]] cap (you may need to clear the interior ~~before~~)		# Put the golden secret tip inside the [[Edding 661]] cap (you may need to clear the interior beforehand).
	# Add these grips on the [[Edding 661]] ~~folowing~~ this order: 4 stripes of [[Pilot G2]] grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips and one flat side of [[Pilot Dr. Grip]] grip.		# Add these grips on the [[Edding 661]] following this order: 4 stripes of [[Pilot G2]] grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips, and one flat side of [[Pilot Dr. Grip]] grip.
	# Add these grips on the [[Veleda White Board Marker]] cap ~~folowing~~ this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of [[Pilot G2]] grip and the last flat side of [[Pilot Dr. Grip]] grip.		# Add these grips on the [[Veleda White Board Marker]] cap following this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of [[Pilot G2]] grip, and the last flat side of [[Pilot Dr. Grip]] grip.
	# Put the silver secret tip inside the [[~~Veleda~~ White Board Marker]] cap		# Put the silver secret tip inside the [[Velleda White Board Marker]] cap.
	# Add ~1 round of black electrical tape on the thinner side of the [[Papermate Super Magic +]] body		# Add ~1 round of black electrical tape on the thinner side of the [[Papermate Super Magic +]] body.
	# Add 1 stripe of [[Pilot G2]] grip on the front of the old [[Giotto Turbo Maxi]], add ~~celo~~ tape on the rest of front		# Add 1 stripe of [[Pilot G2]] grip on the front of the old [[Giotto Turbo Maxi]], and add cello tape on the rest of the front.
	# Put the thick side of the [[Papermate Super Magic +]] body inside the back of the old [[Giotto Turbo Maxi]] barrel		# Put the thick side of the [[Papermate Super Magic +]] body inside the back of the old [[Giotto Turbo Maxi]] barrel.
	# Connect the [[Edding 661]] cap on the remaining [[Papermate Super Magic +]].		# Connect the [[Edding 661]] cap on the remaining [[Papermate Super Magic +]].
	# Connect the ~~Old~~ [[~~Veleda~~ White Board Marker]] cap on the front of the old [[Giotto Turbo Maxi]] barrel		# Connect the old [[Velleda White Board Marker]] cap on the front of the old [[Giotto Turbo Maxi]] barrel.
	==References==		==References==

	[[Category:Pen Mods]]		[[Category:Pen Mods]]

Magiai at 22:31, 21 September 2024

2024-09-21T22:31:20Z

← Older revision		Revision as of 22:31, 21 September 2024
Line 8:		Line 8:
	\|cog=?		\|cog=?
	}}		}}
	The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era.		The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era. A13x himself calls it: "ABM"

	The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originaly created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mods remain a mystery (the tips in particular).		The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originaly created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mods remain a mystery (the tips in particular).

Magiai: Created page with "{{Mod Infobox |name= |image={{#setmainimage:ABM.jpg}} |creator= A13x |style= Single Sided |length= 21.5cm |weight=35~50g |cog=? }} The '''A13x Bullet Mod''' is the main mod of A13x during his "2013" era. The mod was made popular when A13x used it in Pen Spinning World Tournament 2013. This mod was originaly created as a heavy version of a Black Bonkura KT. As of today, some parts of the mods remain a mystery (the tips in particular). ==Construc..."

2024-09-21T22:29:25Z

Created page with "{{Mod Infobox |name= |image={{#setmainimage:ABM.jpg}} |creator= A13x |style= Single Sided |length= 21.5cm |weight=35~50g |cog=? }} The '''A13x Bullet Mod''' is the main mod of A13x during his "2013" era. The mod was made popular when A13x used it in Pen Spinning World Tournament 2013. This mod was originaly created as a heavy version of a Black Bonkura KT. As of today, some parts of the mods remain a mystery (the tips in particular). ==Construc..."

New page

{{Mod Infobox
|name=
|image={{#setmainimage:ABM.jpg}}
|creator= [[A13x]]
|style= [[Single Sided]]
|length= 21.5cm
|weight=35~50g
|cog=?
}}
The '''A13x Bullet Mod''' is the main mod of [[A13x]] during his "2013" era.

The mod was made popular when [[A13x]] used it in [[Pen Spinning World Tournament 2013]]. This mod was originaly created as a heavy version of a [[Black Bonkura KT]]. As of today, some parts of the mods remain a mystery (the tips in particular).

==Construction==

===Parts needed===

List from A13x's sum up video<ref>[https://www.youtube.com/watch?v=TXpMidPvw0E A13x's sum up video]</ref>

* 2x [[Pilot Dr. Grip]]（Grip）
* 1x Old [[Giotto Turbo Maxi]] (Body)
* 1x Old big [[Veleda White Board Marker]] (cap)
* 1x Old [[Papermate Super Magic +]] (Body)
* 1x [[Edding 661]] (cap)
* 1x [[Pilot G2]] (Grip)
* 1x ~1cm section of dimpled grip
* 2x ~0.5cm stripe of grips
* 1x ~0.7cm flat grip
* 2x Secret tips (One silver color and one gold color)
====Additional Items====
* Celo tape and Electrical tape
===Text tutorial===
# Cut ~3.45 cm of the [[Veleda White Board Marker]] cap
# Dissasemble the old [[Giotto Turbo Maxi]] and cut the front until it's ~1cm
# Cut ~4 cm of the old [[Papermate Super Magic +]] body
# Cut both of your [[Pilot Dr. Grip]] grips in half, keep the flat side
# Cut 3 section of [[Pilot G2]] grip, 1x 4 stripes, 1x 2 stripes and 1x 1 stripe
# Put the golden secret tip inside the [[Edding 661]] cap (you may need to clear the interior before)
# Add these grips on the [[Edding 661]] folowing this order: 4 stripes of [[Pilot G2]] grip, the ~1cm section of dimpled grip, 1 ~0.5cm stripe of grips and one flat side of [[Pilot Dr. Grip]] grip.
# Add these grips on the [[Veleda White Board Marker]] cap folowing this order: the last ~0.5cm stripe of grip, the ~0.7cm flat grip, 2 stripes of [[Pilot G2]] grip and the last flat side of [[Pilot Dr. Grip]] grip.
# Put the silver secret tip inside the [[Veleda White Board Marker]] cap
# Add ~1 round of black electrical tape on the thinner side of the [[Papermate Super Magic +]] body
# Add 1 stripe of [[Pilot G2]] grip on the front of the old [[Giotto Turbo Maxi]], add celo tape on the rest of front
# Put the thick side of the [[Papermate Super Magic +]] body inside the back of the old [[Giotto Turbo Maxi]] barrel
# Connect the [[Edding 661]] cap on the remaining [[Papermate Super Magic +]].
# Connect the Old [[Veleda White Board Marker]] cap on the front of the old [[Giotto Turbo Maxi]] barrel
==References==

[[Category:Pen Mods]]