View source for KUzu G3 (UPSB ver.)

{{Mod Infobox
|name=kUzu G3
|image=KUzu G3.jpg
|creator= kUzu
|style= [[Single Sided]]
|length= 20cm
|weight= 20g
|cog= ?
}}
The '''kUzu G3''' is a personal mod of [[JEB]] spinner [[kUzu]].

==Construction==

===Parts needed===
List from UPSB V3:<ref name="Tutorial on UPSB V3">https://upsb-v3.spin-archive.org/topic/10044</ref>
* 1x [[Pilot G3|Plastic G3]] (Barrel, tip)
* 1x [[Zebra Hyper Jell]] (Grip and cap)
* 1x [[Hybrid Gel Grip|HGG]] (tip)
* 2x [[Uni-Ball Signo|Signo DX]] (2 tips, 1 grip)
* 2x [[Pilot Hi-Tec-C]] (Tips)
* 1x [[Dong-A Anyball]] (Grip)
* 1x [[Uni-ball Knock]] (Grip)
* 1x 1 cm grip ([[Zebra Hyper Jell]] can be used)
====Additional Items====
* Electric (black) tape
* an insert (optional) (kUzu uses a page from the "Weekly Jump" magazine)<br>[[File:KUzu G3 insert.jpg||left|thumb|200px|Highligh of the part used for the original insert]]<br clear=all>

===Text tutorial===
====Preparation====
# Remove the backplug, grip and ink from the Plastic G3, then sand down the nubs on the front.
# Cut 1 cm of a grip (Hyper Jell is recommended).
# Cut 1 cm of Hyper Jell grip.
# Do a gripcut on the Knock grip.
# Cut 3 sections from the Anyball grip.
# Cut the clip from the Hyper Jell cap.
# Remove one grip and 2 tips from the Signo DX.
# Remove the tips from the HGG and Pilot Hi-Tec-C.

====Assembly====
# Add 1 cm of Hyper Jell grip on the front of the Plastic G3.
# Add 1 cm of the other grip next to the Hyper Jell grip.
# Put the Pilot Hi-Tec-C tip on the Plastic G3, then add a Signo DX tip onto the Pilot Hi-Tec-C tip (add tape / Blu Tack to help the tips stay in place).
# Cover the 3 tips with the Signo DX grip.
# Put the Knock grip on the Signo DX grip.
# Add the 3 sections of Anyball grip in front of the Knock grip.
# Put one Signo DX tip inside the Hyper Jell cap.
# Put the HGG tip on the remaining Pilot Hi-Tec-C tip, then put it inside the rest of the Hyper Jell grip.
# Put the Hyper Jell grip inside the Hyper Jell cap (HGG tip first).
# Wrap tape on the back of the Plastic G3 body.
# Add an insert (optional).
# Assemble the cap on the back of the Plastic G3 body.
===Trivia===
• This version of the mod is not accurate to the one used by [[kUzu]], as the tutorial of his own version remains secret to this day. However, the list of the parts is available:<ref name="Parts of the legit kUzu g3">https://web.archive.org/web/20120708020249/http://www2.ezbbs.net/36/rohi/</ref>

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]