ArmaG3ddon Mod (Centinex² G3 Mod)

ArmaG3ddon, also called the Centinex² G3 Mod, is a G3-based mod by Centinex².

Construction

Parts needed

• 2 Pilot G3 pens (two tips, one body, one grip)
• 2 Jimnie Gel pens (two grips and one cap)
• 1 Uni-ball Impact RT grip; 1 Anyball grip
• 1 empty ink-cartridge piece; insert

Text tutorial

1. Remove the G3 grip and separate it at its last stripe, keeping the stripe-free section and the remaining grip pieces. Sand the front of the G3 body.
2. Trim the Jimnie Gel cap clip. Place one G3 tip inside a 2.2 cm section of Jimnie Gel grip, then insert the stripe-free section of the G3 grip into the Jimnie grip.
3. Put an insert inside the G3 body. Place the leftover Jimnie grip section and the second Jimnie grip at the front of the body, then fit a cut Impact RT grip above them.
4. Fit an empty cartridge piece to the front of the G3 body. Attach the second G3 tip to the cartridge and add two Anyball grip stripes above it.
5. Fit the prepared Jimnie Gel cap on the rear of the G3 body.