Fen Spinner Wiki - User contributions [en]

Spindys

2026-10-04T12:20:09Z

V 0 1 D: Redirected page to Tilt

#REDIRECT [[Tilt]]

FPSBT 2012

2026-10-04T08:57:42Z

V 0 1 D:

{{Tournament InfoBox
|winner=[[Fel2Fram]]
|date=01 October 2012
|participants=26
|rounds=7
|image={{#setmainimage:}}}}

The '''FPSBT 2012''' or '''French Pen Spinning Board Tournament 2012''' was a tournament hosted by [[FPSB]] and organised by Yaemgo.<ref name="fpsbt2012">[[https://web.archive.org/web/20200806095457/http://thefpsb.penspinning.fr/viewtopic.php?f=2&t=13529&p=340387|Tournoi FPSB 2012 - Inscriptions]]</ref> Although it was French based, non-FPSB members could participate.

==Participants==
<div style=display:inline-table>
{| class="wikitable"
![[FPSB]]
|-
|Caliban
|-
|Daimo
|-
|Chozo
|-
|Pensmu
|-
|Toonet
|-
|[[Fel2Fram]]
|-
|Mot
|-
|Hexbinmos
|-
|Yaemgo
|-
|Neptune
|-
|Seifer
|-
|Saurkk
|-
|Moon
|-
|Alpha
|-
|NapalmGod
|-
|Megas
|-
|SheepSide
|-
|[[gollumsk8]]
|-
|Aaytowi2
|-
|Palmito
|-
|Bakashi
|-
|Babel
|-
|Ark
|-
|[[Neir'da]]
|-
|Orion Meteor
|-
|Haiko
|-
|Blas'
|-
|Blue
|-
|Orysa
|-
|[[Ivabra]]
|-
|Yamamoto
|-
|Nxxs
|-
|Valas
|-
|Legoal
|-
|gira7
|-
|Youc
|}</div>
<div style=display:inline-table>
{| class="wikitable"
![[GPC]]
|-
|Nashi
|-
|Kiyo
|-
|Fang
|}
</div>

==Format==
The tournament had a double elimination format for the first 3 rounds where spinners needed to lose twice in order to be knocked out each round. Upon losing a battle, a spinner from the higher bracket would be knocked down into a lower "Group B" bracket, where they would be eliminated if they lost again. Spinners in the upper bracket after round 2 automatically passed round 3.

Afterwards in round 4 the spinners were placed into 4 groups with the top 2 spinners passing from each group, followed by 3 further single-elimination rounds to reduce the 8 spinners to a single winner of the tournament.

==Judging==
The event had five judges who did not have to be FPSB members and the identities of the judges were kept secret.

===Scoring system===
A 20 point rubric was used to score combos, with criteria categories split into subcriteria:
* Execution: 6 points
** Fluidity: 4 points
** Rhythm: 2 points
* Content: 7 points
** Linkages: 4 points
** Power tricks: 3 points
* Presentation and trick rendering: 4 points (2 each)
* Originality: 3 points

Scores were to be averaged, with the higher average winning each battle.

The split between linkages and power tricks prompted discussion about how to score technical combos built around difficult transitions and combos with unusual or fingerless concepts. Yaemgo defended the split as a way to balance those parts of a combo.<ref name="fpsbt2012" />

==Results==
<tabber>
|-|Round 1=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Babel
| gira7
| '''Babel'''
|-
| Leftfinger
| Moon
| '''Leftfinger'''
|-
| Sheepside
| NxxS
| '''NxxS'''
|-
| Alpha
| Ark
| '''Ark'''
|-
| Chozo
| Palmito
| '''Chozo'''
|-
| Aaytowi
| Daimo
| '''Daimo'''
|-
| Yaemgo
| Blasfem
| '''Yaemgo'''
|-
| Youc
| Seifer
| '''Seifer'''
|-
| Kiyo
| Toonet
| '''Toonet'''
|-
| [[Ivabra]]
| Hexbinmos
| '''[[Ivabra]]'''
|-
| Saurkk
| Valas
| '''Valas'''
|-
| Neptune
| Haiko
| '''Haiko'''
|-
| [[Neir'da]]
| Blue
| '''Blue'''
|-
| Fang
| Taeko
| '''Taeko'''
|-
| Pensmu
| Orysa
| '''Orysa'''
|-
| Nashi
| Raeik
| '''Nashi'''
|-
| Mot
| Orion Meteor
| '''Mot'''
|-
| Caliban
| [[Fel2Fram]]
| '''[[Fel2Fram]]'''
|-
| Legoal
| [[gollumsk8]]
| '''[[gollumsk8]]'''
|-
| Yamamoto
| Megas
| '''Megas'''
|}
|-|Round 2=
{| class="wikitable"
|+ Group A:
! Participant A
! Participant B
! Winner
|-
| Babel
| Valas
| '''Valas'''
|-
| Leftfinger
| Blue
| '''Leftfinger'''
|-
| Daimo
| Mot
| '''Daimo'''
|-
| Seifer
| Haiko
| '''Haiko'''
|-
| Ark
| Chozo
| '''Ark'''
|-
| Yaemgo
| [[Ivabra]]
| '''[[Ivabra]]'''
|-
| NxxS
| Nashi
| '''Nashi'''
|-
| [[gollumsk8]]
| Megas
| '''[[gollumsk8]]'''
|-
| Orysa
| Toonet
| '''Toonet'''
|-
| [[Fel2Fram]]
| Taeko
| '''[[Fel2Fram]]'''
|}

{| class="wikitable"
|+ Group B:
! Participant A
! Participant B
! Winner
|-
| gira7
| Aaytowi2
| '''gira7'''
|-
| Caliban
| Neptune
| '''Caliban'''
|-
| Alpha
| Saurkk
| |-
|-
| Blasfem
| Raeik
| '''Raeik'''
|-
| Hexbinmos
| Orion Meteor
| '''Hexbinmos'''
|-
| Moon
| Palmito
| '''Moon'''
|-
| Yamamoto
| Slice
| |-
|-
| [[Neir'da]]
| Fang
| '''[[Neir'da]]'''
|}
|-|Round 3=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Yaemgo
| Hexbinmos
| '''Yaemgo'''
|-
| Alpha
| gira7
| '''Alpha'''
|-
| Youc
| Caliban
| '''Caliban'''
|-
| NxxS
| Kiyo
| '''Kiyo'''
|-
| Taeko
| Raeik
| '''Taeko'''
|-
| [[Neir'da]]
| Mot
| '''[[Neir'da]]'''
|-
| Seifer
| Moon
| '''Seifer'''
|-
| Yamamoto
| Babel
| '''Babel'''
|-
| Megas
| Orysa
| '''Megas'''
|-
| Chozo
| Blue
| '''Blue'''
|}
|-|Round 4=
{| class="wikitable"
!Group A
!Group B
!Group C
!Group D
|-
|
*Daimo
*'''[[Gollumsk8]]'''
*Babel
*'''Blue'''
*Seifer
|
*'''Valas'''
*'''Ivabra'''
*Megas
*Kiyo
*Alpha
|
*'''[[Fel2Fram]]'''
*Nashi
*Haiko
*'''Yaemgo'''
*Taeko
|
*'''Leftfinger'''
*Ark
*Caliban
*[[Neir'da]]
*'''Toonet'''
|}
|-|Round 5=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| [[Gollumsk8]]
| [[Fel2Fram]]
| '''[[Gollumsk8]]'''
|-
| Valas
| Leftfinger
| '''Valas'''
|-
| Toonet
| [[Ivabra]]
| '''[[Ivabra]]'''
|-
| Blue
| Yaemgo
| '''Blue'''
|}
|-|Round 6=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| [[Fel2Fram]]
| Valas
| '''[[Fel2Fram]]'''
|-
| Blue
| [[Ivabra]]
| '''Blue'''
|}
|-|Final=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| [[Fel2Fram]]
| Blue
| '''[[Fel2Fram]]'''
|}
</tabber>

==References==
<references />
[[Category:Events]]

FPSBT 2011

2026-10-04T08:34:36Z

V 0 1 D:

{{Tournament InfoBox
|winner=[[Fel2Fram]]
|date=13 february 2011
|participants=70
|rounds=6
|image={{#setmainimage:}}}}

The '''FPSBT 2011''' or '''French Pen Spinning Board Tournament 2011''' was a tournament hosted by [[FPSB]] and organised by Raeik. Although it was French based, non-FPSB members could participate.

The first round was a group phase with the top 6 of each 10-man group passing. Successive rounds were single-elimination battles.

[[Fel2Fram]]'s victory in this event brought him wider attention from the international scene.<ref>Diego González, ''Pen Spinning: History and Notation'', 3rd ed., p. 36, [https://www.scribd.com/document/724045904/PS-Book online copy].</ref>

==Participants==
{| class="wikitable"
|
*Toonet
*dOmToM
*Sig
*Roopen
*Seindfu
*Yaemgo
*Tchiken
*Rastaman
*Taï
*Reeadril
*caliban
*Maxooz
*stéréo
*kassskouie
*[[Neir'da]]
*Babel
*Gold Angel
*Lindor
*master K
*Taurlock
*Mello
*Saurkk
*clem'*
*legoal
*TaZ
*[[Leftfinger]]
*TLF
*Zipeout
*Syouko
|
*NicoTeen
*[[gollumsk8]]
*Ikki
*Makizar
*Slice
*Zarglay
*NxxS
*Thblt
*pba
*Lemon rebel
*Cheb
*Hikage
*Nik_O
*Nijuan
*Kasakura
*Ajani
*xdaimow'
*Raeik
*Anikis
*GDraP
*Taeko
*Hichaminou
*Delcatel
*Armaggedon
*Scaervola
*Dagal
*Wulthüz
|
*Côôra
*Skyman
*EYJI
*Sheepside
*[[Fel2Fram]]
*HbX
*TONYMONTANAED
*Storm
*Nix
*seifer_91
*Kwin
*steven
*NinNin
*Haiko
*Ark
*Yamamoto
*Michou
*Kinger
*[[Ivabra]]
*Near
*Futhark
*Orysa
*Rahven
*Ubarus
*Tidus
*ToS
*Coldfire
*Oublard06
*spinawi
*ako_low
*xama
*Kola
|}

==Judges<ref>[https://thefpsb.1fr1.net/t2760-fpsbt-2014-resultats-finale-petite-finale Reveal of the judges]</ref>==
The judges of FPSBT 2011 were secret until the results of the final round.
* Judge 1 : Leftfinger (Which was replaced by [[Pixel]])
* Judge 2 : Patchwork
* Judge 3 : Smile
* Substitute Judge : Seithness

==Results==
<tabber>
|-|Round 1=
{| class="wikitable"
!Group A
!Group B
!Group C
!Group D
!Group E
!Group F
|-
|
*'''dOmToM '''
*'''Toonet '''
*'''Sig '''
*'''Taï 18'''
*'''Rastaman '''
*'''[[Neir'da]]'''
*Roopen
*Stereo
*Tchiken
*Seindfu
|
*'''Lindor '''
*'''Babel '''
*'''Xabi '''
*'''Gold Angel '''
*'''Master_K '''
*'''TaZ '''
*Clem'
*Syouko
*Saurkk
*Legoal
|
*'''[[Gollumsk8]]'''
*'''Slice '''
*'''MaKiZaR '''
*Ikki
*'''Hikage '''
*'''Ajani'''
*thblt
*nijuan
*NxxS
|
*'''Raeik'''
*'''GDraP '''
*'''Sheepside '''
*'''EYJI '''
*'''Taeko '''
*'''Wulthuz '''
*Reaper
*Jean Bob
*Dagal
*scaevola
|
*'''[[Fel2Fram]]'''
*'''HbX '''
*'''Kinger '''
*'''Haiko '''
*'''NinNin '''
*'''KwiN '''
*Yamamoto
*Nix
*TONY
*ark
|
*'''Futhark '''
*'''[[Ivabra]] '''
*'''Near '''
*'''Rahven '''
*'''KoLa '''
*'''Tidus'''
*Tos
*Ako low
*Orysa
*xama
|}
|-|Round 2=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Taeko
| [[Gollumsk8]]
| '''[[Gollumsk8]]'''
|-
| EYJI
| Slice
| '''Slice'''
|-
| Sheepside
| Makizar
| '''Makizar'''
|-
| GDraP
| Ikki
| '''GDraP'''
|-
| Raeik
| Hikage
| '''Raeik'''
|-
| Kola
| [[Fel2Fram]]
| '''[[Fel2Fram]]'''
|-
| Rahven
| Hbx
| '''Hbx'''
|-
| Near
| Kinger
| '''Kinger'''
|-
| [[Ivabra]]
| Haiko
| '''[[Ivabra]]'''
|-
| Futhark
| Ninnin
| '''Futhark'''
|-
| dOmToM
| Taz
| '''dOmToM'''
|-
| Toonet
| Master_K
| '''Toonet'''
|-
| Sig
| Gold Angel
| '''Gold Angel'''
|-
| Taï
| Xabi
| '''Xabi'''
|-
| Rastaman
| Babel
| '''Babel'''
|-
| Kwin
| Lindor
| '''Lindor'''
|}
|-|Round 3=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Lindor
| [[Gollumsk8]]
| '''Lindor'''
|-
| Raeik
| Kinger
| '''Kinger'''
|-
| Toonet
| Xabi
| '''Toonet'''
|-
| Slice
| [[Ivabra]]
| '''Slice'''
|-
| [[Fel2Fram]]
| Makizard
| '''[[Fel2Fram]]'''
|-
| Domtom
| Hbx
| '''Hbx'''
|-
| Babel
| Futhark
| '''Futhark'''
|-
| GDrap
| Gold Angel
| '''GDrap'''
|}
|-|Round 4=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| HbX
| [[Fel2Fram]]
| '''[[Fel2Fram]]'''
|-
| Kinger
| Lindor
| '''Lindor'''
|-
| Futhark
| Slice
| '''Futhark'''
|-
| GDraP
| Toonet
| '''Toonet'''
|}
|-|Round 5=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Futhark
| Toonet
| '''Futhark'''
|-
| Lindor
| [[Fel2Fram]]
| '''[[Fel2Fram]]'''
|}
|-|Final=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Futhark
| [[Fel2Fram]]
| '''[[Fel2Fram]]'''
|}
</tabber>

==References==
<references />
[[Category:Events]]

FPSBT 2010

2026-10-04T08:32:53Z

V 0 1 D:

{{Tournament InfoBox
|winner=[[Gollumsk8]]
|date=13 February 2010
|participants=96
|rounds=6
|image={{#setmainimage:}}}}

The '''FPSBT 2010''' or '''French Pen Spinning Board Tournament 2010''' was a tournament hosted by [[FPSB]] and organised by Lindor. Although it was French based, non-FPSB members could participate.

The tournament was comprised of single-elimination battles until the final round with a 4-way group battle for the finalists. After Round 1 groups were created to categorize spinners based on strength, this continued with more groups into the later rounds, with the first group having the strongest spinners. Spinners who dropped into a lower group could not return to a higher group.<ref name="Taeko2017">Taeko, post of 14 December 2017 in the FPSB discussion “[WT17] Résultats de la finale,” [https://thefpsb.1fr1.net/t4248-wt17-resultats-de-la-finale archived FPSB forum thread].</ref>

==Participants==
{| class="wikitable"
|
*Down
*Ice ull
*Niks
*Blasfem
*Zarglay
*Gdrap
*Neptune
*Ikki
*Eyegoore
*Splatshy’s
*Tikle
*Smile
*Vico
*Ajani
*Kasakura
*Trushu
*Reaper
*Fabker
*Graph
*Wulthuz
*Dagal
*Spark
*Ninin
*Mantestara
*Arthing
*Snowhite
*Spen
*Jeece
*Skyblue
*Goldfinger
*Domtom
*Pensafter
|
*Megas
*[[Leftfinger]]
*Tonymontanaed
*Pimouss
*Chat enragé
*Gold angel
*Toonet
*[[Fel2fram]]
*Philistin
*Near
*Thunder
*Legoal
*Phlogistique
*Nxxs
*VII
*Nix
*Losfan
*Makizar
*Didou
*Xeflax
*Zetsumyou
*Tidus
*Hexbinmos
*Spini
*Futhark
*Luniel
*Haiko
*Hbx
*Sig
*Flagadoss
|
*Aaa
*Agloria
*Kaizoku
*Aka
*[[Gollumsk8]]
*Blacklight
*Knot
*Kinger
*Dvd
*Crazy pen
*[[S777]]
*Anikis
*Kaktus
*Julmad
*Luffy
*Bow
*Slice
*Ako low
*Almad28
*Kows
*Raeik
*Orysa
*Fanta
*Pen13
*Gaku
*Xama
*Maxbug
*Freshgod
*Yamamoto
*Skylowers
*Spyroxx
*Tos
*Yuwiku
*Eskaa
|}

==Judges<ref>[https://thefpsb.penspinning.fr/viewtopic.php?f=120&t=8043 Reveal of the judges]</ref>==
The judges of FPSBT 2010 were secret until the results of the final round.
* Judge 1 : Littleboy
* Judge 2 : [[Zombo]]
* Judge 3 : [[Freeman]]
* Judge 3 : Lindor

==Results==
<tabber>
|-|Round 1=
{| class="wikitable"
! Participant A
! Participant B
! Winner
|-
| Haiko
| Whulthuz
| '''Whulthuz'''
|-
| G-Rap
| Danile
| '''G-Rap'''
|-
| Toonet
| Neptune
| '''Toonet'''
|-
| Tonymontanaed
| Spark
| '''Tonymontanaed'''
|-
| Yuwiku
| Ikki
| '''Ikki'''
|-
| Ninnin
| Philistin
| '''Philistin'''
|-
| Nix
| [[S777]]
| '''[[S777]]'''
|-
| Kinger
| Kaizoku
| '''Kinger'''
|-
| Hexbinmos
| Gold Angel
| '''Gold Angel'''
|-
| Seindfu
| VII
| '''Seindfu'''
|-
| Slice
| Spen
| '''Slice'''
|-
| GDRap
| Smile
| '''Smile'''
|-
| Reaper
| Niks
| '''Niks'''
|-
| Zestumyu
| Mantestera
| '''Zestumyu'''
|-
| Eskaa
| Spyroxx
| '''Eskaa'''
|-
| Fanta
| Kira
| '''Fanta'''
|-
| Sig
| Flash
| '''Sig'''
|-
| Down
| [[Gollumsk8]]
| '''[[Gollumsk8]]'''
|-
| Pensaflter
| Thblt
| '''Pensaflter'''
|-
| Near
| [[Ivabra]]
| '''[[Ivabra]]'''
|-
| Aka
| Spini
| '''Spini'''
|-
| Agloria
| Hbx
| '''Hbx'''
|-
| Flagadoss
| Snowhite
| '''Flagadoss'''
|-
| Tos
| Syouko
| '''Syouko'''
|-
| Ice ull
| Zarglay
| '''Zarglay'''
|-
| Arthing
| Dagal
| '''Arthing'''
|-
| Didou
| Makizar
| '''Makizar'''
|-
| Kows
| Julmad
| '''Julmad'''
|-
| Orysa
| Raeik
| '''Raeik'''
|-
| Trushu
| Fabker
| '''Trushu'''
|-
| Tikle
| Blasfem
| '''Tikle'''
|-
| Goldfinger
| Domtom
| '''Domtom'''
|-
| Xeflax
| Losfan
| '''Losfan'''
|-
| Anikis
| Aaa
| '''Anikis'''
|-
| Yamamoto
| Freshgod
| '''Yamamoto'''
|-
| Maxbug
| Akalow
| '''Maxbug'''
|-
| Thund3r
| Vico
| '''Thund3r'''
|-
| Phlo
| Chat enragé
| '''Phlo'''
|-
| DVD
| Jeece
| '''DVD'''
|-
| Nxxs
| Almad28
| '''Almad28'''
|-
| Gaku
| Crazy Pen
| '''Crazy Pen'''
|-
| Tidus
| Pen13
| '''Pen13'''
|-
| Kasakura
| [[Fel2Fram]]
| '''Kasakura'''
|-
| Bow
| Ajani
| '''Ajani'''
|-
| Voltaic
| Pimouss
| '''Voltaic'''
|-
| Legoal
| Leftinger
| '''Legoal'''
|-
| Megas
| Futhark
| '''Futhark'''
|-
| Luniel
| Blacklight
| '''Blacklight'''
|}
|-|Round 2=
{| class="wikitable"
|+ Group A
! Participant A
! Participant B
! Winner
|-
| [[s777]]
| sig
| '''[[s777]]'''
|-
| DvD
| crazy pen
| '''crazy pen'''
|-
| Toonet
| Legoal
| '''Toonet'''
|-
| Spini
| Tikle
| '''Spini'''
|-
| Niks
| Arthing
| '''Niks'''
|-
| Maxbug
| pen13
| '''Maxbug'''
|-
| Anikis
| Thund3r
| '''Anikis'''
|-
| Kinger
| Voltaic
| '''Voltaic'''
|-
| Eskaa
| Seindfu
| '''Eskaa'''
|-
| Smile
| Futhark
| '''Smile'''
|-
| [[Gollumsk8]]
| zetsumyou
| '''[[Gollumsk8]]'''
|-
| Phlo
| Fanta
| '''Phlo'''
|-
| Ikki
| Tonymontanaed
| '''Tonymontanaed'''
|-
| Wulthuz
| Zargaly
| '''Wulthuz'''
|-
| Slice
| Trushu
| '''Trushu'''
|-
| Domtom
| Syouko
| '''Domtom'''
|-
| Blacklight
| Kasakura
| '''Blacklight'''
|-
| Hbx
| pensafter
| '''Hbx'''
|-
| Losfan
| Flagadoss
| '''Losfan'''
|-
| Near
| ajani
| '''Near'''
|-
| Gold angel
| phillistin
| '''Gold angel'''
|-
| Raeik
| Almad
| '''Raeik'''
|-
| G rap H
| Makizar
| '''G rap H'''
|-
| Julmad
| Yamamoto
| '''Yamamoto'''
|}

{| class="wikitable"
|+ Group B
! Participant A
! Participant B
! Winner
|-
| Nix
| Flash
| '''Flash'''
|-
| Nxxs
| Gaku
| '''Gaku'''
|-
| Neptune
| [[leftfinger]]
| '''Neptune'''
|-
| Blasfem
| Snowhite
| '''Blasfem'''
|-
| Reaper
| Dagal
| '''Reaper'''
|-
| Tidus
| Ako low
| '''Ako low'''
|-
| Hexbinmos
| Aaa
| '''Hexbinmos'''
|-
| Vico
| Pimouss
| '''Vico'''
|-
| Kaizoku
| spyroxx
| '''Kaizoku'''
|-
| VII
| GDrap
| '''GDrap'''
|-
| Megas
| Down
| '''Megas'''
|-
| Mantestara
| chat enragé
| '''chat enragé'''
|-
| Kira
| Yuwiku
| '''Yuwiku'''
|-
| Haiko
| Spark
| '''Spark'''
|-
| Spen
| pba
| '''pba'''
|-
| Fabker
| Goldfinger
| '''Goldfinger'''
|-
| ToS
| Luniel
| '''Luniel'''
|-
| aka
| [[fel2Fram]]
| '''aka'''
|-
| Xeflax
| Thblt
| '''Xeflax'''
|-
| Agloria
| [[Ivabra]]
| '''[[Ivabra]]'''
|-
| Bow
| Ninnin
| '''Ninnin'''
|-
| Jeece
| Orysa
| '''Orysa'''
|-
| Danile
| Didou
| '''Danile'''
|-
| Kows
| Freshgod
| '''Kows'''
|}
|-|Round 3=
{| class="wikitable"
|+ Group A
! Participant A
! Participant B
! Winner
|-
| [[s777]]
| Phlo
| '''[[s777]]'''
|-
| crazy pen
| [[Gollumsk8]]
| '''[[Gollumsk8]]'''
|-
| Toonet
| TONYMONTANAED
| '''TONYMONTANAED'''
|-
| Spini
| Raeik
| '''Spini'''
|-
| Niks
| Yamamoto
| '''Yamamoto'''
|-
| Maxbug
| Euskaadi
| '''Euskaadi'''
|-
| Anikis
| Trushu
| '''Trushu'''
|-
| Voltaic
| Hbx
| '''Voltaic'''
|-
| Smile
| Blacklight
| '''Smile'''
|-
| Wulthuz
| Losfan
| '''Losfan'''
|-
| Near
| Domtom
| '''Domtom'''
|-
| Gold Angel
| G rap H
| '''Gold Angel'''
|}

{| class="wikitable"
|+ Group B
! Participant A
! Participant B
! Winner
|-
| Sig
| syouko
| '''Sig'''
|-
| DvD
| legoal
| '''DvD'''
|-
| Arthing
| pen13
| |-
|-
| futhark
| [[Ivabra]]
| '''futhark'''
|-
| Kinger
| Fanta
| '''Kinger'''
|-
| Ikki
| thund3r
| '''Ikki'''
|-
| Zarglay
| Danile
| '''Danile'''
|-
| slice
| Agloria
| '''slice'''
|-
| kasakura
| ajani
| '''ajani'''
|-
| pensafter
| kows
| '''kows'''
|-
| flagadoss
| Kaizoku
| |-
|-
| Julmad
| Gaku
| '''Gaku'''
|-
| flash
| hexbinmos
| '''flash'''
|-
| Neptune
| zetsumyou
| '''Neptune'''
|-
| Reaper
| chat enragé
| '''chat enragé'''
|-
| Ako low
| spark
| '''spark'''
|-
| Vico
| Blasfem
| '''Blasfem'''
|-
| GDrap
| megas
| '''megas'''
|-
| Yuwiku
| ninnin
| '''Yuwiku'''
|-
| pba
| Tikle
| '''Tikle'''
|-
| aka
| xeflax
| '''aka'''
|-
| orysa
| goldfinger
| '''orysa'''
|}

{| class="wikitable"
|+ Group C
! Participant A
! Participant B
! Winner
|-
| Nix
| Thblt
| '''Nix'''
|-
| [[Leftfinger]]
| Fabker
| '''Fabker'''
|-
| Dagal
| VII
| '''Dagal'''
|-
| Tidus
| Aaa
| '''Tidus'''
|-
| Pimouss
| Nxxs
| '''Pimouss'''
|-
| Down
| Snowhite
| '''Snowhite'''
|-
| Mantestara
| Freshgod
| '''Mantestara'''
|-
| Haiko
| spyroxx
| '''Haiko'''
|-
| Spen
| Jeece
| '''Jeece'''
|-
| [[fel2Fram]]
| ToS
| '''[[fel2Fram]]'''
|-
| Bow
| Luniel
| |-
|}
|-|Round 4=
{| class="wikitable"
|+ Group A
! Participant A
! Participant B
! Winner
|-
| [[Gollumsk8]]
| Spini
| '''[[Gollumsk8]]'''
|-
| TONYMONTANAED
| Euskadi
| '''TONYMONTANAED'''
|-
| Yamamoto
| Domtom
| '''Domtom'''
|-
| Trushu
| Smile
| '''Smile'''
|-
| Voltaic
| Gold Angel
| '''Gold Angel'''
|-
| Losfan
| [[s777]]
| '''[[s777]]'''
|}

{| class="wikitable"
|+ Group B
! Participant A
! Participant B
! Winner
|-
| Niks
| Maxbug
| '''Niks'''
|-
| Hbx
| Phlo
| '''Hbx'''
|-
| Blacklight
| Near
| '''Near'''
|-
| Whultuz
| futhark
| '''futhark'''
|-
| G rap H
| DvD
| '''DvD'''
|-
| pen13
| Anikis
| '''Anikis'''
|-
| phillistin
| Ikki
| '''Ikki'''
|-
| Kinger
| Tikle
| '''Kinger'''
|-
| Danile
| Almad
| '''Almad'''
|-
| Slice
| blasfem
| '''Slice'''
|-
| kows
| sig
| '''sig'''
|-
| Kaizoku
| chat enragé
| '''chat enragé'''
|-
| Gaku
| Ajani
| '''Ajani'''
|-
| flash
| megas
| '''megas'''
|-
| crazy pen
| raeik
| '''raeik'''
|-
| spark
| neptune
| '''neptune'''
|-
| yuwiku
| Toonet
| '''Toonet'''
|-
| aka
| orysa
| '''orysa'''
|}

{| class="wikitable"
|+ Group C
! Participant A
! Participant B
! Winner
|-
| Syouko
| dagal
| '''Syouko'''
|-
| Arthing
| GDrap
| |-
|-
| thund3r
| seindfu
| |-
|-
| pensafter
| julmad
| |-
|-
| flagadoss
| [[Fel2Fram]]
| |-
|-
| zetsumyou
| reaper
| |-
|-
| xeflax
| Pimouss
| '''Pimouss'''
|-
| fabker
| goldfinger
| |-
|-
| mantestara
| nix
| |-
|-
| jeece
| didou
| '''jeece'''
|}
|-|Round 5=
{| class="wikitable"
|+ Group A
! Participant A
! Participant B
! Winner
|-
| [[Gollumsk8]]
| DomTom
| '''[[Gollumsk8]]''', '''DomTom'''
|-
| TONYMONTANAED
| s777
| '''s777'''
|-
| Smile
| Gold Angel
| '''Smile'''
|}

{| class="wikitable"
|+ Group B
! Participant A
! Participant B
! Winner
|-
| Spini
| Neptune
| '''Neptune'''
|-
| Trushu
| Voltaic
| '''Voltaic'''
|-
| Losfan
| Orysa
| '''Losfan'''
|-
| Niks
| Sig
| '''Sig'''
|-
| Hbx
| Kinger
| '''Hbx'''
|-
| Near
| Ikki
| '''Ikki'''
|-
| Anikis
| Yamamoto
| '''Anikis'''
|-
| Ajani
| Raeik
| '''Raeik'''
|-
| Slice
| Futhark
| '''Futhark'''
|-
| chat enragé
| Euskadi
| '''chat enragé'''
|-
| Megas
| Almad
| '''Megas'''
|-
| Toonet
| DvD
| '''Toonet'''
|}

{| class="wikitable"
|+ Group C
! Participant A
! Participant B
! Participant C
! Winner
|-
| Phlo
| nix
|
| '''nix'''
|-
| Whultuz
| pensafter
|
| '''Whultuz'''
|-
| G rap H
| Syouko
|
| '''G rap H'''
|-
| Tikle
| seindfu
|
| '''Tikle'''
|-
| Danile
| Snowhite
|
| '''Snowhite'''
|-
| Kaizoku
| fabker
|
| '''fabker'''
|-
| flash
| Fanta
|
| '''Fanta'''
|-
| spark
| Jeece
| Crazy pen
| '''Jeece''', '''Crazy pen'''
|-
| yuwiku
| Maxbug
|
| '''Maxbug'''
|-
| aka
| phillistin
|
| '''aka'''
|-
| GDrap
| ivabra
|
| '''GDrap'''
|-
| legoal
| kows
|
| '''legoal'''
|-
| makizar
| pen13
|
| '''makizar'''
|-
| [[Fel2Fram]]
| Blasfem
|
| '''[[Fel2Fram]]'''
|-
| Pimouss
| zetsumyou
|
| '''zetsumyou'''
|-
| Tidus
| Blacklight
|
| '''Blacklight'''
|-
| Haiko
| Gaku
|
|
|}
|-|Final=
{| class="wikitable"
|+ Group A
! Participant A
! Participant B
! Participant C
! Participant D
! Winner
|-
| [[Gollumsk8]]
| Smile
| DomTom
| [[s777]]
| '''[[Gollumsk8]]'''
|}

{| class="wikitable"
|+ Group B
! Participant A
! Participant B
! Winner
|-
| TONYMONTANAED
| Raeik
| '''TONYMONTANAED'''
|-
| Gold Angel
| Ikki
| '''Ikki'''
|-
| Voltaic
| Toonet
| '''Toonet'''
|-
| Sig
| Anikis
| '''Anikis'''
|-
| Hbx
| NEPTUNE
| '''NEPTUNE'''
|-
| Futhark
| Chat Enragé
| '''Futhark'''
|-
| Megas
| Losfan
| '''Megas'''
|}

{| class="wikitable"
|+ Group C
! Participant A
! Participant B
! Participant C
! Winner
|-
| Orysa
| Maxbug
|
| '''Maxbug'''
|-
| Niks
| zetsumyou
| Almad28
| '''Niks'''
|-
| Near
| Whultuz
|
| '''Near'''
|-
| Yamamoto
| Slice
|
| '''Yamamoto'''
|-
| DvD
| Blacklight
|
| '''Blacklight'''
|-
| nix
| snowhite
|
| '''nix'''
|-
| G rap H
| Euskadi
|
| '''Euskadi'''
|-
| Tikle
| Ajani
|
| '''Tikle'''
|-
| Fanta
| fabker
|
| |-
|-
| aka
| Kinger
|
| '''aka'''
|-
| GDrap
| Trushu
|
| '''GDrap'''
|-
| legoal
| Spini
|
| '''legoal'''
|-
| makizar
| crazy pen
|
| '''makizar'''
|}
</tabber>

==References==
<references />
[[Category:Events]]

S777

2026-10-04T08:17:31Z

V 0 1 D: /* Other pens and mods */

'''S777''' was an [[FPSB]] spinner who won the [[Pen Spinning World Tournament]] in 2011<ref name="wt11final">[https://www.penspinning.fr/wt-2011-and-the-winner-is-3539 PenSpinning.fr: WT 2011 — And the winner is…], 28 May 2011.</ref>. His technical spinning style was characterised by his use of extreme difficulty, deliberate control over tempo<ref name="intro">[https://thefpsb.1fr1.net/t1751-presentation-s777 FPSB: Présentation s777], S777's introduction of 6 July 2013 and subsequent posts, including his spider-style discussion of 10 July.</ref> and use of short, light pen mods that were considered considerably handicapped for the level of spinning he was performing.

==History==
S777 began spinning around September 2006. When introducing his two-year solo on 2 September 2008, he described having spent two years in the hobby; in July 2013 he reported six years and ten months of experience. <ref name="twoyears">[http://web.archive.org/web/20201023055837id_/https://thefpsbv2.penspinning.fr/viewtopic.php?f=47&t=9756 FPSB V2: s777 2 years solo], opening post by S777, 2 September 2008.</ref><ref name="intro" />His early spinning was characterised by his rapid learning of tricks and linkages in a condensed time frame.

By 2008 he was representing FPSB in the [[Pen Spinning World Cup 2008|World Cup]]. He reached the third round of the [[Pen Spinning World Tournament 2009|2009 World Tournament]], where he was eliminated by [[Spinnerpeem]], and later submitted videos for six stages of the 2010 FPSB tournament. In 2011 he won the World Tournament, defeating [[Kin]] in the final.<ref name="wc08r2">[https://web.archive.org/web/20080424031655id_/http://www.upsb.info:80/forum/index.php?showtopic=4228 UPSB: World Cup 08 — Second Round — RESULTS OUT], including Zombo's detailed pairings, 28 February 2008.</ref><ref name="wt09r3">[https://web.archive.org/web/20090305101025id_/http://www.upsb.info:80/forum/index.php?showtopic=17988&st=0& UPSB: World Tournament 2009 — Round 3 — Matchups OUT!], 2 March 2009.</ref><ref name="wt09qf">[https://web.archive.org/web/20090415084559id_/http://www.upsb.info:80/forum/index.php?showtopic=19361&st=0& UPSB: World Tournament 2009 — Quarterfinals — Results OUT!], 11 April 2009; the subsequent bracket confirms Spinnerpeem's advancement.</ref><ref name="wt11final" />

After his world title, he took a prolonged break to concentrate on his studies. In his 2013 introduction he described a two-year pause to enter a school in Palaiseau. He nevertheless released a promotional demonstration in July 2012, explaining that it did not mark a return to regular spinning activity.<ref name="intro" /><ref name="promo">[https://www.youtube.com/watch?v=bP94DxGQsqM S777: s777 2012 penspinning promo], uploaded 31 July 2012; accompanying description.</ref>

In July 2013 he returned to FPSB discussion and released ''Moonlight Session'', which PenSpinning.fr presented as his return. In his introduction he described himself as rusty and said that he hoped to make more videos.<ref name="intro" /><ref name="moonlight">[https://www.penspinning.fr/s777-moonlight-session-5272 PenSpinning.fr: s777 — Moonlight Session], 30 July 2013.</ref>

==Spinning==
===Solo videos===
====Two-year solo====
<div class="toccolours mw-collapsible mw-collapsed">
Introduced on FPSB on 2 September 2008. S777 credited Armand, also known as Blackdiamond, with editing and dedicated the video to Armand and Antoine. His accompanying post emphasized the enjoyment of spinning and the human experiences he had gained through the hobby.<ref name="twoyears" />
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=Fl9cV_nHsSM</youtube>
</div>
</div>

====Third-year video====
A video titled ''s777 third year'' was featured by PenSpinning.fr on 27 May 2010.<ref>[https://www.penspinning.fr/s777-third-year-1419 PenSpinning.fr: s777 third year], 27 May 2010.</ref>


====Fourth-year solo====
<div class="toccolours mw-collapsible mw-collapsed">
Featured by PenSpinning.fr on 5 December 2010.<ref>[https://www.penspinning.fr/s777-4th-years-solo-2775 PenSpinning.fr: s777 4th years solo], 5 December 2010.</ref>
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=umBVvDUEd_w</youtube>
</div>
</div>

====2012 promo / Six-years solo====
<div class="toccolours mw-collapsible mw-collapsed">
Released on 31 July 2012 as a promotional demonstration. Forum discussions also called this video his six-years solo. It combined technical experiments with more conventional spinning.<ref name="promo" /><ref name="sixyearsup">[https://web.archive.org/web/20131102185457id_/http://forum.upsb.info/showthread.php?t=12167&page=1 UPSB: s777 penspinning 6 years solo], opened 31 July 2012.</ref>
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=bP94DxGQsqM</youtube>
</div>
</div>

====Moonlight Session====
<div class="toccolours mw-collapsible mw-collapsed">
Featured on 30 July 2013, following his return to FPSB discussion.<ref name="moonlight" />
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=lZIQHRvx8Tc</youtube>
</div>
</div>

===Influential spinning and ideas===
====Spider style====
In July 2013, S777 explained his understanding of '''spider style''' as an approach in which the visual effect of finger movement takes precedence over the movement of the mod alone. He contrasted restrained finger motion in older Korean styles with the expressive movement of the fingers, hand and arm associated with [[Bonkura]], [[Key3]], [[Fratleym]], himself, [[Nekura]] and [[Fel2fram]]. He also discussed how camera position and pen choice could direct attention toward the hand.<ref name="intro" />

S777 credited Bonkura with first proposing this approach and used an analogy between classicism and romanticism to explain the stylistic distinction. His post documents his own interpretation of spider style and its history.<ref name="intro" />

====Creativity and aesthetics====
In a December 2009 UPSB discussion, S777 argued that a spinner's intentions and combo design mattered beyond finger dexterity. He discussed motivation, learning order and coordination, and emphasized the development of new links that were both smooth and visually effective.<ref name="creativity">[https://web.archive.org/web/20131103154307id_/http://www.upsb.info/forum/index.php?showtopic=22415 UPSB: Does intellegence effect spinning ability?], post by S777, 22 December 2009.</ref>

He also questioned the emphasis placed on difficult tricks in competition. Discussing the 2009 World Tournament final, he argued that difficulty should contribute to a combo's beauty rather than become its sole purpose. As an example, he said that he had included a left-handed backfall 1.5 in his third-round submission for tournament purposes, but would have chosen differently for a collaboration video.<ref name="aesthetics">[https://web.archive.org/web/20090520143826/http://thefpsb.penspinning.fr:80/viewtopic.php?f=51&t=3882 FPSB: WT09 — Vidéos de la finale], post by S777, 19 May 2009.</ref>

====Two-pen spinning and stalls====
S777's 2012 demonstration included two-pen-one-hand backfall work, double-bust sequences with different catches, and stalls. In his accompanying explanation, he distinguished a section focused on technical novelty from a more conventional section and described his attempt to combine new material with attractive spinning.<ref name="sixyearsfpsb">[https://web.archive.org/web/20200918072135/https://thefpsb.penspinning.fr/viewtopic.php?f=27&t=13367&p=339987 FPSB: s777 6 years solo], technical explanation posted by S777; posting date absent from the supplied export.</ref>

The video received both praise for its control and discussion of its aesthetics. Although S777 described some sequences as new, i.suk pointed to earlier two-pen work by Pashas. The discussion therefore documents experimentation rather than establishing that S777 invented two-pen-one-hand spinning.<ref name="sixyearsup" />

His earlier two-pen-two-hand work was also mentioned in later technical writing. In 2019, i.suk named him among spinners who had used brief two-pen-two-hand applications before more extensive theoretical approaches were developed.<ref>[https://isukps.blogspot.com/2019/08/wt19-r1-combo-2p2h-theory.html i.suk: WT19 R1 combo / 2P2H theory], 22 August 2019.</ref>

====Continuous tricks and reported feats====
Historical FPSB and UPSB lists recorded a number of performances by S777. These entries describe feats reported at the time; they should not all be read as uncontested or currently standing world records.<ref name="records08">[https://web.archive.org/web/20081022174130/http://thefpsb.penspinning.fr:80/viewtopic.php?f=35&t=309&sid=22d7ee5972e99236773b93e997fbc641 FPSB: Records mondiaux], thread opened 16 October 2008, with subsequent updates.</ref><ref name="records12">[https://thefpsb.1fr1.net/t359-records-mondiaux-du-pen-spinning FPSB: Records mondiaux du pen spinning], list posted 6 October 2012.</ref>

{| class="wikitable"
! Performance !! Historical report !! Video / notes
|-
| Thumbspin reverse || 10.0 in the 2008 list; 9.5 in the 2012 list || [https://www.youtube.com/watch?v=1vFa7xlToBE Video]. The lists disagree on the rotation count.
|-
| Thumbaround extended bust || 50 || [https://www.youtube.com/watch?v=RAPuq7yeV48 Video]. Category definitions were disputed in the contemporary discussion.
|-
| Continuous fingerless thumbaround || 31 || [https://www.youtube.com/watch?v=8-O7uJqt-yY Video].
|-
| Fingerpass, one minute || 83 || [https://www.youtube.com/watch?v=U7RyIDquVck Video], reported in October 2008.
|-
| Fingerpass with two pens and two hands, thirty seconds || 79 || [https://www.youtube.com/watch?v=wpOS7fjaWME Video]. A contemporary reply noted that this was not an accepted record category.
|-
| Ring–middle backaround 2.0 || 147 || Listed in 2012, below Crinix's 179.
|-
| Palmspin reverse || 10.5 || Listed in 2012.
|-
| Backfall || 3.5 || [https://www.youtube.com/watch?v=ObMJlSVeXwA Video], also linked in i.suk's 2016 compilation.<ref>[https://web.archive.org/web/20170731031625id_/http://upsb.info/xforum/index.php?threads/world-records-compilation-and-tracking-thread.4994/ UPSB: World Records compilation and tracking thread], i.suk, 21 December 2016.</ref>
|}

===Collaboration videos===
{{See also|Collaboration Video}}
S777 and [[Sig]] organized '''S&S''' in 2007 and '''S&S 2nd''' in 2008, according to Kay's retrospective account.<ref>[https://waza.penspinning.jp/2018/07/11/s-and-s/ Kay: S&S], 11 July 2018.</ref>

He directed '''FPSB 4th''', with the main editing credited to SKyblue and 3D work to Neptune. The surviving upload was published in November 2010.<ref name="fpsb4">[https://www.youtube.com/watch?v=8QLRC0gnCVI FPSB 4th], uploaded by penspinner777, 12 November 2010; production credits.</ref>


In his 2013 introduction, he also named '''Pro & Beginners II''' and '''Grip Aviaire''' among the collaborations in which he had participated.<ref name="intro" /> Other surviving contribution clips include:
* '''Ryo 2nd''' — [https://www.youtube.com/watch?v=0GD-XZ0dvK8 S777's contribution].
* '''Skonix 1st''' — [https://www.youtube.com/watch?v=H9f5_NCTDxw S777's contribution].<ref>[https://www.penspinning.es/viewtopic.php?f=18&t=34 SPSC: S777 video thread], contemporary video listing.</ref>

===Community involvement===
S777 participated in FPSB and international forum discussions about learning, aesthetics and community organization. In a discussion of experienced members and selection decisions, he argued against judging a spinner's contribution chiefly by their forum presence and advocated hearing the views of accomplished spinners. He also stated that he had declined a large World Tournament judging workload.<ref>[https://web.archive.org/web/20210621195445/https://thefpsb.penspinning.fr/viewtopic.php?f=16&t=9798&p=264875&sid=94a5de33fdfe53de6ddf544750c9ae62 FPSB: Anciens et sélections], posts by S777; original posting dates absent from the supplied export.</ref>

He expressed concern about the unauthorized circulation of unreleased footage. In June 2009, he objected to combos being included in a promotional video without his permission.<ref>[https://web.archive.org/web/20090704020719/http://thefpsb.penspinning.fr:80/viewtopic.php?f=22&t=4272 FPSB: PenSpinning Promo 7,1], post by S777, 26 June 2009.</ref>

===Pen Mods===
{{See also|Pen Modding}}
====S777 MX====
{{See also|S777 mx}}
S777 created the '''S777 MX'''<ref name="mxtutorial">[https://web.archive.org/web/20090804225411id_/http://thefpsb.penspinning.fr:80/viewtopic.php?f=41&t=4633 FPSB: s777 MX], tutorial posted by S777, 3 August 2009.</ref>, a single-capped mod documented in his FPSB tutorial of 3 August 2009. The construction uses a G1 body and front components, together with a cap assembly incorporating a marker cap and RSVP cap. His tutorial gives a length of approximately 19.5–20 cm and a weight of about 12 g without putty, or 14 g for his own example, balanced around the centre of the pen.<ref name="mxtutorial" /> A later PenSpinning.fr tutorial explicitly credits him with inventing the mod.<ref>[https://www.penspinning.fr/s777-mx-1621 Diana: S777 MX], PenSpinning.fr, 13 July 2010.</ref>

[https://www.youtube.com/watch?v=o9yxQCzHiIk His tutorial video] includes English subtitles.

====Other pens and mods====
In July 2013, he listed a double-capped Dong-a, Rushon and an eraser pen among his preferred pens.<ref name="intro" /> He was also associated with the [[KillerGel]], which was created by Aaa.<ref>[https://www.penspinning.fr/killergel-2333 PenSpinning.fr: KillerGel], tutorial crediting Aaa.</ref> Another pen mod that he would infrequently use was the [[S777 black mod]].

Vôre-Tèx later described making a fully gold single-capped mod at S777's request. The maker dated the design's invention to mid-2017.<ref>[https://voretex.pm/x-incipiens-stabilus-mods/ Vôre-Tèx: Incipiens / Stabilus mods], description of the gold S777 G3.</ref>

==Competitive Spinning==

===World Cup 2008===
{{See also|Pen Spinning World Cup 2008}}
S777 represented FPSB in the team-based World Cup 2008. He faced Hunlanlin in Round 1 and Nory in Round 2; FPSB did not advance beyond the second round.<ref>[https://w.atwiki.jp/penspinorder/pages/916.html WorldCup2008] (participant list, pairings, and team results)</ref>
<tabber>
|-|Round 1=
<youtube width="320" height="192">https://youtu.be/OY2o2EzFB1g</youtube><br />
Win versus Hunlanlin.
|-|Round 2=
<youtube width="320" height="192">https://youtu.be/eyRp2i5HZp4</youtube><br />
Win versus Nory.
</tabber>

===World Tournament 2009===
{{See also|Pen Spinning World Tournament 2009}}
S777 reached Round 3, where he was defeated by Spinnerpeem.<ref>[https://www.scribd.com/document/724045904/PS-Book Pen Spinning: History and Notation], “WT09”</ref>
<tabber>
|-|Round 1=
<youtube width="320" height="192">https://www.youtube.com/watch?v=oopuTD2kTyY</youtube><br />
Win versus [[12ve]].
|-|Round 2=
<youtube width="320" height="192">https://www.youtube.com/watch?v=XlJVR-3GH9g</youtube><br />
Win versus [[Gisele8]]
|-|Round 3=
<youtube width="320" height="192">https://www.youtube.com/watch?v=vKokVl72HLY</youtube><br />
Loss versus [[Spinnerpeem]]

</tabber>

===FPSBT 2010===
{{See also|FPSBT 2010}}

<tabber>
|-|Round 1=
<youtube width="320" height="192">https://www.youtube.com/watch?v=2r18RqSlSAQ</youtube><br />
Win versus Nix.
|-|Round 2=
<youtube width="320" height="192">https://www.youtube.com/watch?v=5IODhCdTHNI</youtube><br />
Win vs sig.
|-|Round 3=
<youtube width="320" height="192">https://www.youtube.com/watch?v=2zebXBqk48c</youtube><br />
Win vs Phlo.
|-|Round 4=
<youtube width="320" height="192">https://www.youtube.com/watch?v=mlFLy3wnrOg</youtube><br />
Win vs Losfan.
|-|Round 5=
<youtube width="320" height="192">https://www.youtube.com/watch?v=Yc7ZRL6J0cU</youtube><br />
Win vs TONYMONTANAED.
|-|Round 6=
<youtube width="320" height="192">https://www.youtube.com/watch?v=6XP9PzsYdAU</youtube><br />
Group phase. Did not win this round.
</tabber>

===World Tournament 2011===
{{See also|Pen Spinning World Tournament 2011}}
<tabber>
|-|Round 1=
<youtube width="320" height="192">https://www.youtube.com/watch?v=HZfY7LABujg</youtube><br />
Group phase.
|-|Round 2=
<youtube width="320" height="192">https://www.youtube.com/watch?v=WAEOsOJ-zN0</youtube><br />
Win versus Asin.
|-|Round 3=
<youtube width="320" height="192">https://www.youtube.com/watch?v=bPgcESahFXg</youtube><br />
Win versus [[Eriror]].
|-|Round 4=
<youtube width="320" height="192">https://www.youtube.com/watch?v=tcm3EUfCukQ</youtube><br />
Versus [[x1213]]
|-|Round 5=
<youtube width="320" height="192">https://www.youtube.com/watch?v=wnG10y_vHbw</youtube><br />
Win bersus [[Snow]].
|-|Round 6=
<youtube width="320" height="192">https://www.youtube.com/watch?v=vMJ01PBKiOQ</youtube><br />
Win versus [[Kin]].
</tabber>

==Legacy==
S777's influence is visible in later spinners' attempts to reproduce his techniques. In October 2011, GeeGeeGee explicitly credited him as the inspiration for a continuous fingerless thumbaround 1.5 demonstration. His Rushon spinning and palm-side inverse-bust or inverse-backaround movements also became subjects of identification and imitation threads.<ref>[https://web.archive.org/web/20131103213506id_/http://forum.upsb.info/showthread.php?t=7770&page=1 UPSB: S777 FL TA1.5 cont. with SLOWMO], GeeGeeGee, 4 October 2011.</ref><ref>[https://web.archive.org/web/20131101230528id_/http://forum.upsb.info/showthread.php?t=12118&page=1 UPSB: {Help} S777 trick], July 2012.</ref>

His World Tournament title, videos and writings document both competitive achievement and an approach to spinning in which difficulty, originality and expressive movement were considered together.<ref name="wt11final" /><ref name="aesthetics" /><ref name="intro" />

[[Category: Notable Spinners]]
[[Category:World Champions]]

S777

2026-10-04T08:16:15Z

V 0 1 D: /* History */

'''S777''' was an [[FPSB]] spinner who won the [[Pen Spinning World Tournament]] in 2011<ref name="wt11final">[https://www.penspinning.fr/wt-2011-and-the-winner-is-3539 PenSpinning.fr: WT 2011 — And the winner is…], 28 May 2011.</ref>. His technical spinning style was characterised by his use of extreme difficulty, deliberate control over tempo<ref name="intro">[https://thefpsb.1fr1.net/t1751-presentation-s777 FPSB: Présentation s777], S777's introduction of 6 July 2013 and subsequent posts, including his spider-style discussion of 10 July.</ref> and use of short, light pen mods that were considered considerably handicapped for the level of spinning he was performing.

==History==
S777 began spinning around September 2006. When introducing his two-year solo on 2 September 2008, he described having spent two years in the hobby; in July 2013 he reported six years and ten months of experience. <ref name="twoyears">[http://web.archive.org/web/20201023055837id_/https://thefpsbv2.penspinning.fr/viewtopic.php?f=47&t=9756 FPSB V2: s777 2 years solo], opening post by S777, 2 September 2008.</ref><ref name="intro" />His early spinning was characterised by his rapid learning of tricks and linkages in a condensed time frame.

By 2008 he was representing FPSB in the [[Pen Spinning World Cup 2008|World Cup]]. He reached the third round of the [[Pen Spinning World Tournament 2009|2009 World Tournament]], where he was eliminated by [[Spinnerpeem]], and later submitted videos for six stages of the 2010 FPSB tournament. In 2011 he won the World Tournament, defeating [[Kin]] in the final.<ref name="wc08r2">[https://web.archive.org/web/20080424031655id_/http://www.upsb.info:80/forum/index.php?showtopic=4228 UPSB: World Cup 08 — Second Round — RESULTS OUT], including Zombo's detailed pairings, 28 February 2008.</ref><ref name="wt09r3">[https://web.archive.org/web/20090305101025id_/http://www.upsb.info:80/forum/index.php?showtopic=17988&st=0& UPSB: World Tournament 2009 — Round 3 — Matchups OUT!], 2 March 2009.</ref><ref name="wt09qf">[https://web.archive.org/web/20090415084559id_/http://www.upsb.info:80/forum/index.php?showtopic=19361&st=0& UPSB: World Tournament 2009 — Quarterfinals — Results OUT!], 11 April 2009; the subsequent bracket confirms Spinnerpeem's advancement.</ref><ref name="wt11final" />

After his world title, he took a prolonged break to concentrate on his studies. In his 2013 introduction he described a two-year pause to enter a school in Palaiseau. He nevertheless released a promotional demonstration in July 2012, explaining that it did not mark a return to regular spinning activity.<ref name="intro" /><ref name="promo">[https://www.youtube.com/watch?v=bP94DxGQsqM S777: s777 2012 penspinning promo], uploaded 31 July 2012; accompanying description.</ref>

In July 2013 he returned to FPSB discussion and released ''Moonlight Session'', which PenSpinning.fr presented as his return. In his introduction he described himself as rusty and said that he hoped to make more videos.<ref name="intro" /><ref name="moonlight">[https://www.penspinning.fr/s777-moonlight-session-5272 PenSpinning.fr: s777 — Moonlight Session], 30 July 2013.</ref>

==Spinning==
===Solo videos===
====Two-year solo====
<div class="toccolours mw-collapsible mw-collapsed">
Introduced on FPSB on 2 September 2008. S777 credited Armand, also known as Blackdiamond, with editing and dedicated the video to Armand and Antoine. His accompanying post emphasized the enjoyment of spinning and the human experiences he had gained through the hobby.<ref name="twoyears" />
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=Fl9cV_nHsSM</youtube>
</div>
</div>

====Third-year video====
A video titled ''s777 third year'' was featured by PenSpinning.fr on 27 May 2010.<ref>[https://www.penspinning.fr/s777-third-year-1419 PenSpinning.fr: s777 third year], 27 May 2010.</ref>


====Fourth-year solo====
<div class="toccolours mw-collapsible mw-collapsed">
Featured by PenSpinning.fr on 5 December 2010.<ref>[https://www.penspinning.fr/s777-4th-years-solo-2775 PenSpinning.fr: s777 4th years solo], 5 December 2010.</ref>
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=umBVvDUEd_w</youtube>
</div>
</div>

====2012 promo / Six-years solo====
<div class="toccolours mw-collapsible mw-collapsed">
Released on 31 July 2012 as a promotional demonstration. Forum discussions also called this video his six-years solo. It combined technical experiments with more conventional spinning.<ref name="promo" /><ref name="sixyearsup">[https://web.archive.org/web/20131102185457id_/http://forum.upsb.info/showthread.php?t=12167&page=1 UPSB: s777 penspinning 6 years solo], opened 31 July 2012.</ref>
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=bP94DxGQsqM</youtube>
</div>
</div>

====Moonlight Session====
<div class="toccolours mw-collapsible mw-collapsed">
Featured on 30 July 2013, following his return to FPSB discussion.<ref name="moonlight" />
<div class="mw-collapsible-content">
<youtube width="320" height="192">https://www.youtube.com/watch?v=lZIQHRvx8Tc</youtube>
</div>
</div>

===Influential spinning and ideas===
====Spider style====
In July 2013, S777 explained his understanding of '''spider style''' as an approach in which the visual effect of finger movement takes precedence over the movement of the mod alone. He contrasted restrained finger motion in older Korean styles with the expressive movement of the fingers, hand and arm associated with [[Bonkura]], [[Key3]], [[Fratleym]], himself, [[Nekura]] and [[Fel2fram]]. He also discussed how camera position and pen choice could direct attention toward the hand.<ref name="intro" />

S777 credited Bonkura with first proposing this approach and used an analogy between classicism and romanticism to explain the stylistic distinction. His post documents his own interpretation of spider style and its history.<ref name="intro" />

====Creativity and aesthetics====
In a December 2009 UPSB discussion, S777 argued that a spinner's intentions and combo design mattered beyond finger dexterity. He discussed motivation, learning order and coordination, and emphasized the development of new links that were both smooth and visually effective.<ref name="creativity">[https://web.archive.org/web/20131103154307id_/http://www.upsb.info/forum/index.php?showtopic=22415 UPSB: Does intellegence effect spinning ability?], post by S777, 22 December 2009.</ref>

He also questioned the emphasis placed on difficult tricks in competition. Discussing the 2009 World Tournament final, he argued that difficulty should contribute to a combo's beauty rather than become its sole purpose. As an example, he said that he had included a left-handed backfall 1.5 in his third-round submission for tournament purposes, but would have chosen differently for a collaboration video.<ref name="aesthetics">[https://web.archive.org/web/20090520143826/http://thefpsb.penspinning.fr:80/viewtopic.php?f=51&t=3882 FPSB: WT09 — Vidéos de la finale], post by S777, 19 May 2009.</ref>

====Two-pen spinning and stalls====
S777's 2012 demonstration included two-pen-one-hand backfall work, double-bust sequences with different catches, and stalls. In his accompanying explanation, he distinguished a section focused on technical novelty from a more conventional section and described his attempt to combine new material with attractive spinning.<ref name="sixyearsfpsb">[https://web.archive.org/web/20200918072135/https://thefpsb.penspinning.fr/viewtopic.php?f=27&t=13367&p=339987 FPSB: s777 6 years solo], technical explanation posted by S777; posting date absent from the supplied export.</ref>

The video received both praise for its control and discussion of its aesthetics. Although S777 described some sequences as new, i.suk pointed to earlier two-pen work by Pashas. The discussion therefore documents experimentation rather than establishing that S777 invented two-pen-one-hand spinning.<ref name="sixyearsup" />

His earlier two-pen-two-hand work was also mentioned in later technical writing. In 2019, i.suk named him among spinners who had used brief two-pen-two-hand applications before more extensive theoretical approaches were developed.<ref>[https://isukps.blogspot.com/2019/08/wt19-r1-combo-2p2h-theory.html i.suk: WT19 R1 combo / 2P2H theory], 22 August 2019.</ref>

====Continuous tricks and reported feats====
Historical FPSB and UPSB lists recorded a number of performances by S777. These entries describe feats reported at the time; they should not all be read as uncontested or currently standing world records.<ref name="records08">[https://web.archive.org/web/20081022174130/http://thefpsb.penspinning.fr:80/viewtopic.php?f=35&t=309&sid=22d7ee5972e99236773b93e997fbc641 FPSB: Records mondiaux], thread opened 16 October 2008, with subsequent updates.</ref><ref name="records12">[https://thefpsb.1fr1.net/t359-records-mondiaux-du-pen-spinning FPSB: Records mondiaux du pen spinning], list posted 6 October 2012.</ref>

{| class="wikitable"
! Performance !! Historical report !! Video / notes
|-
| Thumbspin reverse || 10.0 in the 2008 list; 9.5 in the 2012 list || [https://www.youtube.com/watch?v=1vFa7xlToBE Video]. The lists disagree on the rotation count.
|-
| Thumbaround extended bust || 50 || [https://www.youtube.com/watch?v=RAPuq7yeV48 Video]. Category definitions were disputed in the contemporary discussion.
|-
| Continuous fingerless thumbaround || 31 || [https://www.youtube.com/watch?v=8-O7uJqt-yY Video].
|-
| Fingerpass, one minute || 83 || [https://www.youtube.com/watch?v=U7RyIDquVck Video], reported in October 2008.
|-
| Fingerpass with two pens and two hands, thirty seconds || 79 || [https://www.youtube.com/watch?v=wpOS7fjaWME Video]. A contemporary reply noted that this was not an accepted record category.
|-
| Ring–middle backaround 2.0 || 147 || Listed in 2012, below Crinix's 179.
|-
| Palmspin reverse || 10.5 || Listed in 2012.
|-
| Backfall || 3.5 || [https://www.youtube.com/watch?v=ObMJlSVeXwA Video], also linked in i.suk's 2016 compilation.<ref>[https://web.archive.org/web/20170731031625id_/http://upsb.info/xforum/index.php?threads/world-records-compilation-and-tracking-thread.4994/ UPSB: World Records compilation and tracking thread], i.suk, 21 December 2016.</ref>
|}

===Collaboration videos===
{{See also|Collaboration Video}}
S777 and [[Sig]] organized '''S&S''' in 2007 and '''S&S 2nd''' in 2008, according to Kay's retrospective account.<ref>[https://waza.penspinning.jp/2018/07/11/s-and-s/ Kay: S&S], 11 July 2018.</ref>

He directed '''FPSB 4th''', with the main editing credited to SKyblue and 3D work to Neptune. The surviving upload was published in November 2010.<ref name="fpsb4">[https://www.youtube.com/watch?v=8QLRC0gnCVI FPSB 4th], uploaded by penspinner777, 12 November 2010; production credits.</ref>


In his 2013 introduction, he also named '''Pro & Beginners II''' and '''Grip Aviaire''' among the collaborations in which he had participated.<ref name="intro" /> Other surviving contribution clips include:
* '''Ryo 2nd''' — [https://www.youtube.com/watch?v=0GD-XZ0dvK8 S777's contribution].
* '''Skonix 1st''' — [https://www.youtube.com/watch?v=H9f5_NCTDxw S777's contribution].<ref>[https://www.penspinning.es/viewtopic.php?f=18&t=34 SPSC: S777 video thread], contemporary video listing.</ref>

===Community involvement===
S777 participated in FPSB and international forum discussions about learning, aesthetics and community organization. In a discussion of experienced members and selection decisions, he argued against judging a spinner's contribution chiefly by their forum presence and advocated hearing the views of accomplished spinners. He also stated that he had declined a large World Tournament judging workload.<ref>[https://web.archive.org/web/20210621195445/https://thefpsb.penspinning.fr/viewtopic.php?f=16&t=9798&p=264875&sid=94a5de33fdfe53de6ddf544750c9ae62 FPSB: Anciens et sélections], posts by S777; original posting dates absent from the supplied export.</ref>

He expressed concern about the unauthorized circulation of unreleased footage. In June 2009, he objected to combos being included in a promotional video without his permission.<ref>[https://web.archive.org/web/20090704020719/http://thefpsb.penspinning.fr:80/viewtopic.php?f=22&t=4272 FPSB: PenSpinning Promo 7,1], post by S777, 26 June 2009.</ref>

===Pen Mods===
{{See also|Pen Modding}}
====S777 MX====
{{See also|S777 mx}}
S777 created the '''S777 MX'''<ref name="mxtutorial">[https://web.archive.org/web/20090804225411id_/http://thefpsb.penspinning.fr:80/viewtopic.php?f=41&t=4633 FPSB: s777 MX], tutorial posted by S777, 3 August 2009.</ref>, a single-capped mod documented in his FPSB tutorial of 3 August 2009. The construction uses a G1 body and front components, together with a cap assembly incorporating a marker cap and RSVP cap. His tutorial gives a length of approximately 19.5–20 cm and a weight of about 12 g without putty, or 14 g for his own example, balanced around the centre of the pen.<ref name="mxtutorial" /> A later PenSpinning.fr tutorial explicitly credits him with inventing the mod.<ref>[https://www.penspinning.fr/s777-mx-1621 Diana: S777 MX], PenSpinning.fr, 13 July 2010.</ref>

[https://www.youtube.com/watch?v=o9yxQCzHiIk His tutorial video] includes English subtitles.

====Other pens and mods====
In July 2013, he listed a double-capped Dong-a, Rushon and an eraser pen among his preferred pens.<ref name="intro" /> He was also associated with the '''KillerGel''', which was created by Aaa.<ref>[https://www.penspinning.fr/killergel-2333 PenSpinning.fr: KillerGel], tutorial crediting Aaa.</ref>

Vôre-Tèx later described making a fully gold single-capped mod at S777's request. The maker dated the design's invention to mid-2017.<ref>[https://voretex.pm/x-incipiens-stabilus-mods/ Vôre-Tèx: Incipiens / Stabilus mods], description of the gold S777 G3.</ref>

==Competitive Spinning==

===World Cup 2008===
{{See also|Pen Spinning World Cup 2008}}
S777 represented FPSB in the team-based World Cup 2008. He faced Hunlanlin in Round 1 and Nory in Round 2; FPSB did not advance beyond the second round.<ref>[https://w.atwiki.jp/penspinorder/pages/916.html WorldCup2008] (participant list, pairings, and team results)</ref>
<tabber>
|-|Round 1=
<youtube width="320" height="192">https://youtu.be/OY2o2EzFB1g</youtube><br />
Win versus Hunlanlin.
|-|Round 2=
<youtube width="320" height="192">https://youtu.be/eyRp2i5HZp4</youtube><br />
Win versus Nory.
</tabber>

===World Tournament 2009===
{{See also|Pen Spinning World Tournament 2009}}
S777 reached Round 3, where he was defeated by Spinnerpeem.<ref>[https://www.scribd.com/document/724045904/PS-Book Pen Spinning: History and Notation], “WT09”</ref>
<tabber>
|-|Round 1=
<youtube width="320" height="192">https://www.youtube.com/watch?v=oopuTD2kTyY</youtube><br />
Win versus [[12ve]].
|-|Round 2=
<youtube width="320" height="192">https://www.youtube.com/watch?v=XlJVR-3GH9g</youtube><br />
Win versus [[Gisele8]]
|-|Round 3=
<youtube width="320" height="192">https://www.youtube.com/watch?v=vKokVl72HLY</youtube><br />
Loss versus [[Spinnerpeem]]

</tabber>

===FPSBT 2010===
{{See also|FPSBT 2010}}

<tabber>
|-|Round 1=
<youtube width="320" height="192">https://www.youtube.com/watch?v=2r18RqSlSAQ</youtube><br />
Win versus Nix.
|-|Round 2=
<youtube width="320" height="192">https://www.youtube.com/watch?v=5IODhCdTHNI</youtube><br />
Win vs sig.
|-|Round 3=
<youtube width="320" height="192">https://www.youtube.com/watch?v=2zebXBqk48c</youtube><br />
Win vs Phlo.
|-|Round 4=
<youtube width="320" height="192">https://www.youtube.com/watch?v=mlFLy3wnrOg</youtube><br />
Win vs Losfan.
|-|Round 5=
<youtube width="320" height="192">https://www.youtube.com/watch?v=Yc7ZRL6J0cU</youtube><br />
Win vs TONYMONTANAED.
|-|Round 6=
<youtube width="320" height="192">https://www.youtube.com/watch?v=6XP9PzsYdAU</youtube><br />
Group phase. Did not win this round.
</tabber>

===World Tournament 2011===
{{See also|Pen Spinning World Tournament 2011}}
<tabber>
|-|Round 1=
<youtube width="320" height="192">https://www.youtube.com/watch?v=HZfY7LABujg</youtube><br />
Group phase.
|-|Round 2=
<youtube width="320" height="192">https://www.youtube.com/watch?v=WAEOsOJ-zN0</youtube><br />
Win versus Asin.
|-|Round 3=
<youtube width="320" height="192">https://www.youtube.com/watch?v=bPgcESahFXg</youtube><br />
Win versus [[Eriror]].
|-|Round 4=
<youtube width="320" height="192">https://www.youtube.com/watch?v=tcm3EUfCukQ</youtube><br />
Versus [[x1213]]
|-|Round 5=
<youtube width="320" height="192">https://www.youtube.com/watch?v=wnG10y_vHbw</youtube><br />
Win bersus [[Snow]].
|-|Round 6=
<youtube width="320" height="192">https://www.youtube.com/watch?v=vMJ01PBKiOQ</youtube><br />
Win versus [[Kin]].
</tabber>

==Legacy==
S777's influence is visible in later spinners' attempts to reproduce his techniques. In October 2011, GeeGeeGee explicitly credited him as the inspiration for a continuous fingerless thumbaround 1.5 demonstration. His Rushon spinning and palm-side inverse-bust or inverse-backaround movements also became subjects of identification and imitation threads.<ref>[https://web.archive.org/web/20131103213506id_/http://forum.upsb.info/showthread.php?t=7770&page=1 UPSB: S777 FL TA1.5 cont. with SLOWMO], GeeGeeGee, 4 October 2011.</ref><ref>[https://web.archive.org/web/20131101230528id_/http://forum.upsb.info/showthread.php?t=12118&page=1 UPSB: {Help} S777 trick], July 2012.</ref>

His World Tournament title, videos and writings document both competitive achievement and an approach to spinning in which difficulty, originality and expressive movement were considered together.<ref name="wt11final" /><ref name="aesthetics" /><ref name="intro" />

[[Category: Notable Spinners]]
[[Category:World Champions]]

NIKoo G3

2026-10-03T22:39:38Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:nikoog3.jpg}}
|creator= [[NIKoo]]
|style= [[Single Sided]]
|length= 19cm
|weight= ?g
|cog=
}}
The '''NIKoo G3''' is a single-sided mod made by [[JEB]] spinner [[NIKoo]]. This mod is a variation of the [[GJH]] mod. As NIKoo never released its tutorial, the mod presented here is a replica.

==Construction==

===Parts needed===
List from the UPSB V3<ref name="Tutorial">https://web.archive.org/web/20121101115016/http://www.upsb.info/forum/index.php?showtopic=21320</ref>:
* 1x [[Pilot G3|G3]] (Metalic tip, barrel, and cap)
* 1x Jedo (tip)
* 3x [[Pentel Hybrid Gel Grip|HGG]] (3 tips and 2 grip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Pilot Dr. Grip#Dr. Grip G-Spec|Dr. Grip G-Spec MP]] (outer and inner grip)
* 1x [[Pilot AirBlanc]] (grip)

====Additional Items====
* Tape
* An insert
* Glue

===Text tutorial===
====Preparation====
# Cut your Airblanc grip to approximately 1.2 cm and 1.8 cm.
# Cut a small section and the ring of one HGG grip.
# Cut your G-spec grip to slightly longer than the previous step
# Cut 2x 2 blocks of Anyball grip.
# File the bump of the g3 barrel.
# Cut the thread part of the g3 front (including its bump).

====Assembly====
=====Front side=====
# Add 2 blocks of anyball grip and the HGG grip at the front of the G3.
# Stack the tips in this order inside the HGG grip: G3 tip onto Jedo tip, and Jedo tip onto Hgg tip.
# Overgrip the HGG grip with: the bigger cut section of Airblanc grip, 2 blocks of Anyball grip and the smaller cut section of Airblanc grip.

=====Cap side=====
# Place the signo tip, g-spec inner grip, HGG ring (in this order) inside the G3 cap.
# Place the HGG small part onto the G3 cap, overgrip it with the cut outer grip of G-spec
# Add some tape on the end of the G3 barrel, then connect the G3 cap to it.

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]

Le mod blanc

2026-10-03T22:39:35Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:LMB.jpg}}
|creator= Twim
|style= [[Double Sided]]
|length= 20.5cm
|weight= ?g
|cog=
}}
'''Le mod blanc''' is a double-sided mod made by [[FPSB]] spinner Twim. The name of the mod translates to "The white mod".

==Construction==

===Parts needed===
Parts list from the video below:
* x2 Ulmann eraser pens (one barrel and two caps)<ref name="PM">[https://penmodding.pm/archives/624 Le Mod Blanc tutorial, PenModding]</ref>
* x1 [[Pilot Dr. Grip|French Dr. Grip]](grip)
* x2 [[Uni-Ball Signo]](tips)
* x2 [[Sailor IC Liquid Gel|Reynold Gel wave or Sailor gel]] (tips)
<br>[[File:LMB1.jpg|left|thumb|200px|Eraser markers used in the tutorial]]<br clear=all>
===Additional items===
* Tape

===Text tutorial===
====Preparation====
# Cut the Dr. Grip grip in half.
# Sand the bottom of the Sailor/Gel wave tip until it's ~2.2 cm with a Signo tip on it.<br>[[File:LMB2.jpg|left|thumb|300px|]]<br clear=all>
# Empty the Ulmann eraser-marker barrel. Remove the printed markings if desired.

====Assembly====
# Screw the Signo tip onto the Sailor/Gel wave tip.
# Place the tip stack onto the marker's cap, then wrap some tape around it.<br>[[File:LMB3.jpg|left|thumb|300px|]]<br clear=all>
# Add half of Dr. Grip grip onto the cap.<br>[[File:LMB4.jpg|left|thumb|300px|]]<br clear=all>
# Repeat on the other side.

==References==
<references />

[[Category:Pen Mods]]

KillerGel

2026-10-03T22:39:33Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:Kilergel.jpg}}
|creator= Aaa
|style= [[Double Sided]]
|length= ~20cm
|weight= 16g
|cog=
}}
The '''KillerGel''' is a double-sided mod made by [[FPSB]] modder Aaa. The mod gained popularity after [[s777]] used it in the CV "Minovate 2nd".<ref>[https://www.youtube.com/watch?v=n3Yr1I7835k Minovate 2nd S777 combo]</ref>

==Construction==

===Parts needed===
List from FPSB V3:<ref name="Tutorial">https://thefpsb.penspinning.fr/viewtopic.php?f=61&t=4674</ref>

* 2x [[Dong-A Anyball|Star Gel Max]] (grip)
* 2x old [[Paper Mate Flexgrip Ultra]] (tips and body)
* 1x Tinten Killer body.
* 2x [[Sailor IC Liquid Gel|Gel Waves]] (cap)
* [[Pilot G2]] (grip, three stripes per end)
* Thin grip strips

====Additional items===
* 2 inserts

===Text tutorial===
# Cut both ends of the Tintenkiller barrel and empty it.<ref name="PM">[https://penmodding.pm/archives/1551 KillerGel tutorial, PenModding]</ref>
# Cut the upper part of the Gel waves caps, file the interior if required.
# From the front, cut the last stripe of Flexgrip ultra body
# Roll your inserts around the small section of Flexgrip ultra body
# Screw the Flexgrip ultra tips on the Flexgrip ultra small body part
# Fit three G2 stripes over the paper-wrapped Flexgrip section, then add a thin grip stripe over them.
# Place the Flexgrip ultra small body package inside the Gel waves caps, it should fit snugly with the grips.
# Add a big block of Star Gel Max grips on the back of Gel waves caps
# Connect the Gel waves caps on the Tinten killer body

==References==
<references />

[[Category:Pen Mods]]

Yo Mx²

2026-10-03T22:38:56Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:yomx2.jpg}}
|creator= Pyralux
|style= [[Double Sided]]
|length= 19.5cm
|weight= ?
|cog= cop
}}
The '''Yo Mx²''' is a double-sided mod made by [[FPSB]] spinner Pyralux.
==Construction==

===Parts needed===

List from Pyralux's post:<ref name="Tutorial">https://thefpsbv2.penspinning.fr/viewtopic.php?t=8380</ref>
* x1 Impega (body)
* x2 Bic Critérium (Tip part)
* x1 [[Pilot G2]] (2 back round part)
* x2 [[Pentel Hybrid Gel Grip]] (Tips)
* x2 [[Dong-A Anyball| Papermate Star Gel Max]] (Grips)
* x2 [[Pilot G1]] (Tips)
* x2 Reynold Magic + (2 caps)
* Some decorative grips

===Text tutorial===
====Preparation====
# Cut the Impega body to 10.3 cm.
# Cut the clip of the Pilot G2 back round part.

====Assembly====
# Place the Pentel Hybrid Gel Grip tip into the Magic + cap.
# Push the Bic Critérium tip part inside the Magic + cap ("tip" facing outward)
# Cover the Pilot G2 back round part with the Papermate Star Gel Max grip.
# Place the Pilot G1 tip inside the Papermate Star Gel Max grip.
# Assemble your Pilot G2 back round part structure on the Magic + cap.
# Place the cap section into the Impega body (fill the gap with a decorative grip)
# Add two stripes of decorative grip on the Papermate Star Gel Max
# Repeat on the other side

==References==
<references />

[[Category:Pen Mods]]

Waterfall

2026-10-03T22:38:53Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=Waterfall
|image=Wateraafl.JPG
|creator= Skatox/Waterfall
|style= [[Double Sided]]
|length= 20.5cm
|weight= 16g
|cog= COP
}}

The '''Waterfall''' mod is a light mod originally created by [[Skatox]], from [[FPSB]], but remade and popularized by the spinner Waterfall. It received mass popularity when it was promoted in the now-controversial "Which pen mod is right for me?" video by [[KTrinh93]], who suggested that beginners buy it instead of a mod like the [[Buster CYL]] or [[VicGotGame Mod]] because it would hurt their [[Aesthetic Style|style]].

==Construction==

===Parts needed===
* 1x [[Super Pirat]]
* 2x [[Reynolds 094]] (caps)
* 1x [[Dr. Grip Shaker|Dr. Grip]] (grips)
* 2x [[Signo]] (tips)
* (optional) 1-2x [[Dong-A Comssa|Comssa]] (backplugs)

===Text tutorial===
# Empty the Super Pirat barrel and clean the barrel.
# Place the Signo tips on the Reynolds caps.
# Fit the grips over the caps. Shorten them to your preferred length for a lighter mod.
# Place the caps on the body, add Teflon tape to the ends if either of the caps are loose.
# (Optional) you can cut one (or both) of the ends of the waterfall out and substitute it with a [[Dong-A Comssa|Comssa]] backplug for a better balance/stability.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=kwS2D7j4yP4</youtube>

<youtube>https://www.youtube.com/watch?v=2vSKmGXZGL8</youtube>

<youtube>https://www.youtube.com/watch?v=kXO1x0OmCNo</youtube>

==References==
<references />

[[Category: Pen Mods]]

VAIN Comssa

2026-10-03T22:38:49Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:Vaincomssa.JPG}}
|creator= [[VAIN]]
|style= [[Double Sided]]
|length= 20.8cm
|weight= 12.8g
|cog=COP
}}
'''Vain Comssa''' is a personal [[Dong-A Computer Sign Pen|Comssa]] mod made by [[JEB]] spinner [[VAIN]].

==Construction==

===Parts needed===
List from VAIN's YouTube Channel:<ref name="VAIN">https://youtu.be/PUFTAw6HEUY</ref>
* 2x [[Hybrid Gel Grip|HGG]] (two tips)
* 2x [[Dong-A Computer Sign Pen|Comssa]] (2 caps and one barrel)
* 2x [[PenzGear Rings]]
* 6x [[Dong-A Anyball]] (4 black grips, 2 other colored grips, all to be cut to 2 sections)
* 2x [[Pilot Supergrip|Supergrip]] (grips)
* 1x [[Zebra Sarasa|Sarasa]] (grip)

===Text tutorial===
List from VAIN's YouTube Channel:<ref name="VAIN">https://youtu.be/PUFTAw6HEUY</ref>
# Screw HGG tips onto both of the Comssa caps.
# Empty out Comssa barrel by removing the ink and backplug; return the backplug when it is removed.
# Cut both of the Supergrip grips just at the end of the grooved section to just use the smooth section.
# Cut the Sarasa grip into two sections, each approximately 1.4–1.5 cm.
# Prepare six Anyball blocks per cap. Colour combinations are decorative; the wiki uses three 2-block sections in black–coloured–black order.
# Place the anyball sections on the Comssa cap with the order of black > colored anyball > black, 2 > 2 > 2.
# Place the Supergrip grip on the Comssa cap, above the anyball sections.
# Put a Penzgear ring inside the Supergrip grip.
# Place the Sarasa grip over the Supergrip grip. <br>[[File:Vaincomssa1.JPG|left|thumb|200px]]<br clear=all>
# Repeat this process with the other Comssa cap.
# Attach the Comssa caps on the Comssa barrel; done.

===Video Tutorial===
<youtube>https://youtu.be/GWscZY61_Zs</youtube>

Video tutorial by Vora.

==References==
<references />

[[Category:Pen Mods]]

Toro MX

2026-10-03T22:38:37Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image= toromx.jpg
|creator= Toro
|style= [[Single Sided]]
|length= ?cm
|weight= ?g
|cog=?
}}
The '''Toro MX''' is a [[Single Sided]] mod created by [[JEB]] spinner Toro. This mod is a variation of the [[RSVP MX]] mod using [[Pilot SuperGrip]] and [[Pilot Hi-Tec-C]].

==Construction==

===Parts needed===

* 1x [[Pentel RSVP|RSVP]] (Everything)
* 1x [[Pilot Hi-Tec-C]] (tip)
* 1x [[Pilot SuperGrip]] (Grip)
====Additional Items====
* Blu-tak/ teflon tape
* An insert
===Text tutorial===
# Unscrew the tip from Hi-Tec-C pen.
# Remove the RSVP cap, cut off its clip and smooth the cut.
# Poke a hole in the RSVP backplug and insert the inktube into the pen backwards.
# Remove the RSVP grip and push it into the cap.
# Fit the prepared cap to the rear of the barrel.
# Fit the SuperGrip grip over the RSVP front.
# Fit the Hi-Tec-C tip over the RSVP front, using adhesive putty or Teflon tape as needed to secure it.

===Video Tutorial===
<youtube>https://www.youtube.com/watch?v=24KmMcQIcb8</youtube>

Video Tutorial by Oleg.

==References==
<references />

[[Category:Pen Mods]] [[Category:RSVP Mods]]

Tilt Whiteboard Marker Mod

2026-10-03T22:38:34Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:TWBM.jpg}}
|creator= [[Tilt]]
|style= [[Double Sided]]
|length= 27.5cm
|weight= 22.8g
|cog= cop
}}
The '''Tilt Whiteboard Marker Mod''' is a double-sided technical-linkage-oriented mod made by [[Tilt]].
==Construction==

===Parts needed===

List from video below:
* x2 [[Daiso Whiteboard marker]] (2 body)
* x2 [[Pilot Opt Ballpoint Pen]] (Tips and outer body)
* x1 [[Pilot SuperGrip]] (Grips)
* x2 Amazon basic cushion grip pens (2 grips)
* x1 pen+gear mechanical pencil (barrel) (Body)

====Additional Items====
* Tape

===Text tutorial===
# Empty both Daiso whiteboard markers and remove their front assemblies. Wrap tape around the exposed front ends to fit the Opt barrel sleeves.
# Remove the Opt ballpoint tips and outer barrel sleeves, the two Amazon Basics cushion grips, and the Pen+Gear mechanical-pencil connector barrel.
# Cut two 2-stripe SuperGrip sections.
# Stretch each cushion grip and fit it over the round-hole end of an Opt sleeve.
# Fit a SuperGrip section around each Opt tip, then push that tip into the cushion-grip end of its sleeve.
# Fit each completed sleeve onto a taped marker front.
# Wrap tape around the connector barrel as needed and join the two marker barrels at their rear openings.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=-y8NVvxa154</youtube>

Video tutorial by Tilt.

==References==
<references />

[[Category:Pen Mods]]

STA Gear

2026-10-03T22:38:31Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:STA Gear.jpg}}
|creator= [[Menowa*]]
|style= [[Double Sided]]
|length= 19.8cm
|weight= 16.34g
|cog= cop
}}
The '''STA Gear''' is a double-sided mod made by [[JEB]] spinner [[Menowa*]]. He used it in his JapEn 15th and 2020 combo.
His version in JapEn 15th is slightly different as it has an outsert.
==Construction==

===Parts needed===

List from the video below:
* x1 [[STA Aquarelle]] (barrel)
* x2 [[Pentel Fitline]] (backplugs)
* x2 [[Pen'Z Gear]] (2 Caps, 2 Metalring)
* x2 [[Nitom Stalogy]] (Backplugs (long type))
* x2 [[Pilot Dr. Grip]] (Metal ring)
* x2 [[Pilot SuperGrip]] (Grips)
* x2 [[Dong-A Anyball]] (Grips)
* x4 Black o-rings
* x4 White o-rings

====Additional Items====
* (Optional) An insert

===Text tutorial===
# Empty the STA barrel.
# Trim 9 mm from the shaft end of each Fitline backplug, as shown in the creator’s before-and-after photograph. Retain the ribbed section and the remaining shaft.
# Fit one PEN'Z GEAR metal ring to each PEN'Z GEAR cap, then insert the cap into a cut Fitline backplug.
# Fit a Dr. Grip metal ring around each Stalogy backplug and insert it into the outer end of the PEN'Z GEAR cap.
# Fit a complete SuperGrip grip over each cap assembly, smooth end towards the barrel. Overgrip its striped end with at least seven Anyball blocks.
# Fill the exposed gaps around each Fitline/PEN'Z GEAR joint with narrow grip rings.
# Fit a further 3 mm grip section around each Fitline connector.
# Repeat the assembly for the other end, then fit both connectors into the STA barrel. Add an optional insert if the STA barrel is transparent.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=Xhl_Aw3yO4w</youtube>

Video tutorial by Menowa.

==References==
<references />

[[Category:Pen Mods]]

SEVEN G3

2026-10-03T22:38:18Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=SEVEN G3
|image=SEVEN G3.jpg
|creator= SEVEN
|style= [[Single Sided]]
|length= 20cm
|weight= 14g
|cog= COP/Front Heavy
}}
The '''SEVEN G3''' is a personal mod made by [[JEB]] spinner [[SEVEN]].

==Construction==

===Parts needed===
List from Penmodding Wiki's article:<ref name="Penmodding Wiki">https://penmodding.pm/archives/731</ref>
* 1x [[Pilot G3|Plastic G3]] (Barrel, tip)
* 1x [[Zebra Jimnie]] (Cap)
* 1x [[Zebra Hyper Jell]] (Grip) (You can use the [[Zebra Jimnie]] instead)
* 1x [[Hybrid Gel Grip|HGG]] (Grip)
* 1x [[Uni-Ball Signo|Signo DX]] (tip, grip)
* 1x [[Uni-Ball Lakubo]] (Grip)
* 1x [[Dong-A Anyball]] (Grip)
* 1x [[Ohto Metalic Gel]] (Tip)
* 1x [[Ohto Needle-Point]] (Tip)
* 1x [[Pastel Color]] (Grip)

====Additional Items====
* Aluminium tape (Any kind of tape should work)
* Electric tape
* 2 inserts (Optional)<br>[[File:Seven_insert.png|left|thumb|400px|Original insert of SEVEN G3]]<br clear=all>

===Text tutorial===
====Preparation====
# Cut the clip of your [[Zebra Jimnie]] cap, sand if necessary
# Remove the backplug, tip, grip and ink of the [[Pilot G3|Plastic G3]], then sand down the nubs on the front
# Cut 2.6 cm of [[Zebra Hyper Jell]] grip
# Cut 2 blocks of [[Dong-A Anyball]] grip, then cut 1 block of [[Dong-A Anyball]] grip
# Cut 2-3 mm of [[Pastel Color]] grip
# Cut ~3 mm of [[Hybrid Gel Grip|HGG]] grip
# Cut 6 mm of the [[Uni-Ball Signo DX]] grip
# Remove the [[Uni-Ball Lakubo]] grip, the [[Ohto Needle-Point]], [[Ohto Metalic Gel]] and the [[Uni-Ball Signo DX]] tips

====Assembly====
# Place the cut section of [[Hybrid Gel Grip|HGG]] on the base of the [[Uni-Ball Signo]] tip. Put these inside the [[Zebra Jimnie]] cap<br>[[File:SEVEN G3 tips inside cap.jpg|left|thumb|200px]]<br clear=all>
# Stuff the one-block section of [[Dong-A Anyball]] grip inside the [[Zebra Hyper Jell]] grip<br>[[File:SEVEN G3 grip stuffed.jpg|left|thumb|200px]]<br clear=all>
# Add the [[Zebra Hyper Jell]] grip inside the [[Zebra Jimnie]] cap (Optional: Wrap an insert around the [[Zebra Hyper Jell]] grip).<br>[[File:SEVEN G3 cap.jpg|left|thumb|200px]]<br clear=all>
# Add the [[Pastel Color]] grip right after
# Stuff the 2 blocks of [[Dong-A Anyball]] grip inside the front of the [[Pilot G3|Plastic G3]], screw back the [[Pilot G3|Plastic G3]] tip<br>[[File:SEVEN G3 stuffed.jpg|left|thumb|200px]]<br clear=all>
# Add the [[Ohto Metalic Gel]] tip onto the [[Pilot G3|Plastic G3]] tip, then place the [[Ohto Needle-Point]] tip and put it on top of the [[Ohto Metalic Gel]] tip. (Wrap some tape to make it stable.)<br>[[File:SEVEN G3 tips.jpg|left|thumb|200px]]<br clear=all>
# Add 6 mm of the [[Uni-Ball Signo DX]] grip on the front of the [[Pilot G3|Plastic G3]] body, then add the [[Uni-Ball Lakubo]] grip (flat side first). The grip should cover the base of all 3 tips.
# (Optional) Add an insert inside the [[Pilot G3|Plastic G3]] body.
# Put some tape on the back of the [[Pilot G3|Plastic G3]] barrel and place the [[Zebra Jimnie]] cap on top

===Video Tutorial===
<youtube>https://www.youtube.com/watch?v=XSr-xaSnQxU</youtube>

Video tutorial by Septopus.

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]

S777 mx

2026-10-03T22:38:15Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=s777 mx
|image=S777mx.jpg
|creator= S777
|style= [[Single Sided]]
|length= ~19.5cm
|weight= 12g/14g
|cog= COP/Front Heavy
}}
The '''s777 mx''' is a personal mod made by [[FPSB]] spinner [[s777]]. It was known for being s777's main mod throughout his pen-spinning career, he notably used it in WT11.

==Construction==

===Parts needed===
List from [[s777]]'s post:<ref name="s777">https://thefpsb.penspinning.fr/viewtopic.php?f=58&t=4633</ref>
* 1 [[Pilot G1 Grip]] (Everything except inktube and cap)
* 1 [[Pentel RSVP]]（Cap)
* 1 [[Dong-A Anyball|Anyball]]（Grip）(The legit one uses [[Star Gel Max]])
* 1 [[Pilot G2]] (Grip)
* 1 Old [[Esquisse ultra lavables]] felt pen（Cap, can be substituted by Monoprix felt pen, Carrefour felt pen caps (Both old) or stabilo trio caps)
* 1 ~ 2.5x3cm insert (Mandatory)
* 1 Regular sized insert (Optional)

===Text tutorial===
# Remove the G1 Grip backplug and ink tube, retaining the front tip and original grip.
# Fit the Star Gel Max or Anyball grip over the G1 grip.
# Cut and smooth the RSVP cap clip. Cut the G2 grip into short sections and fit them over the cap’s outer end. Optionally fit a short G2 section behind the front overgrip to hide the remaining G1 grip.
# Add an insert inside the G1 barrel if desired.
# Fit the old Esquisse Ultra Lavables cap over the G1 rear.
# Wrap a paper insert around this small cap so that the RSVP cap fits tightly over it. For the first cap shown, the creator specifies approximately 3 × 2.5 cm paper.
# Fit the prepared RSVP cap over the paper-wrapped inner cap.
# Optionally add adhesive putty inside the rear cap to increase weight and adjust balance. S777 used Patafix; the wiki records 12 g without it and 14 g with it.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=o9yxQCzHiIk</youtube>

Video tutorial by S777.

==References==
<references />

[[Category:Pen Mods]]

Pixels KT

2026-10-03T22:38:13Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:pixelskt.jpg}}
|creator= Pixels
|style= [[Double Sided]]
|length= ~21cm
|weight= ?g
|cog= cop
}}
The '''Pixels KT''', is a double-sided mod made by [[Pixels]].

===Parts needed===

List from Pixels's post:<ref name="Pixels tut">https://www.tumblr.com/kokoronopikuseru/54104868591/pixels-kt</ref>:
* x1 Giotto Turbo Dobble (Body)
* x2 [[Pentel Color Twin]] (2 big caps)
* x2 [[Pilot Dr. Grip]] (2 grips)
** It is possible to use only one, but the 2 sides will be slightly different.
* x2 Zebra Nuspiral (2 tips)

====Additional Items====
* Tape

===Text tutorial===
====Preparation====
# Empty the Turbo Dobble barrel. Remove its internal divider by pushing it out from the front with a thin rod.
# Cut both Pilot Dr. Grip grip in half (keep both side with "lip")

====Assembly====

# Place the Dr. Grip grip on the CT cap.
# Place the Nuspiral tip inside the Ct cap / Dr.grip grip.
# Repeat on the other cap.
# Assemble on the Turbo dobble body.

===Image Tutorial===

[[File:Pixelsktimgtut.png|left|thumb|600px|Original image tutorial by Pixel's Tumblr]]<br clear=all>

==References==
<references />

[[Category:Pen Mods]]

Old Fr.Kt

2026-10-03T22:38:10Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image=oldfrkt.png
|creator= Twim
|style= [[Double Sided]]
|length= 20.5cm
|weight= 19g
|cog=COP
}}
The '''Old Fr.Kt''' is a double-sided mod created by Twim. It was made to mimic a [[Dr.kt]] using only parts available in France. It was retroactively renamed Old Fr.Kt after a [[Vore-tex]] made a Fr.Kt based on other parts.

This mod had 4 versions before culminating in an "Ultimate Version" commonly called Fr.Kt.

==Construction for Old Fr.Kt U.V==
===Parts needed===
* 2x [[Reynolds Hi-Fi 215]] (barrel + 2 caps)
* 3x [[Sailor|Reynolds Gel Waves]] (1 gray, 2 colored one (Usually red and blue))
* 2x old [[Papermate Flexgrip Ultra]] (or elite but weight will be slightly different) (tips)
* (Optional) 2x Mecano screws (same as [[Frat MX2]])

===Text tutorial===
====Preparation====
# Empty the Hi-Fi 215 barrel.

# Cut silver Sailor grip into four sections of 2 rings each.
# Cut each coloured Sailor grip into sections of 3 rings, 2 rings and 8 rings.
# Cut the clips of both hi-fi 215 caps.
====Assembly====

# (Optional) Add 2 Meccano screws inside the Hifi 215 cap.
# Push Flexgrip Ultra tip inside the Hifi 215 cap.
# Place grip sections onto the caps in this order: 3 color > 2 silver > 2 color > 2 silver > 8 color
# Repeat on the other cap and connect to the Hifi 215 body.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=pInNre3WRdo&t=1s</youtube>

French video tutorial by [[TheBeyGeek]].

==References==
<references />

[[Category: Pen Mods]]

NIKoo G3

2026-10-03T22:37:59Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:nikoog3.jpg}}
|creator= [[NIKoo]]
|style= [[Single Sided]]
|length= 19cm
|weight= ?g
|cog=
}}
The '''NIKoo G3''' is a single-sided mod made by [[JEB]] spinner [[NIKoo]]. This mod is a variation of the [[GJH]] mod. As NIKoo never released its tutorial, the mod presented here is a replica.

==Construction==

===Parts needed===
List from the UPSB V3<ref name="Tutorial">https://web.archive.org/web/20121101115016/http://www.upsb.info/forum/index.php?showtopic=21320</ref>:
* 1x [[Pilot G3|G3]] (Metalic tip, barrel, and cap)
* 1x Jedo (tip)
* 3x [[Pentel Hybrid Gel Grip|HGG]] (3 tips and 2 grip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [https://wiki.fenspinner.net/index.php/Pilot_Dr._Grip#Dr.%20Grip%20G-Spec|Dr. Grip G-Spec MP] (outer and inner grip)
* 1x [[Pilot AirBlanc]] (grip)

====Additional Items====
* Tape
* An insert
* Glue

===Text tutorial===
====Preparation====
# Cut your Airblanc grip to approximately 1.2 cm and 1.8 cm.
# Cut a small section and the ring of one HGG grip.
# Cut your G-spec grip to slightly longer than the previous step
# Cut 2x 2 blocks of Anyball grip.
# File the bump of the g3 barrel.
# Cut the thread part of the g3 front (including its bump).

====Assembly====
=====Front side=====
# Add 2 blocks of anyball grip and the HGG grip at the front of the G3.
# Stack the tips in this order inside the HGG grip: G3 tip onto Jedo tip, and Jedo tip onto Hgg tip.
# Overgrip the HGG grip with: the bigger cut section of Airblanc grip, 2 blocks of Anyball grip and the smaller cut section of Airblanc grip.

=====Cap side=====
# Place the signo tip, g-spec inner grip, HGG ring (in this order) inside the G3 cap.
# Place the HGG small part onto the G3 cap, overgrip it with the cut outer grip of G-spec
# Add some tape on the end of the G3 barrel, then connect the G3 cap to it.

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]

Le mod blanc

2026-10-03T22:37:57Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:LMB.jpg}}
|creator= Twim
|style= [[Double Sided]]
|length= 20.5cm
|weight= ?g
|cog=
}}
'''Le mod blanc''' is a double-sided mod made by [[FPSB]] spinner Twim. The name of the mod translates to "The white mod".

==Construction==

===Parts needed===
Parts list from the video below:
* x1/2 unnamed marker from Belgium (body and caps)
* x1 [[Pilot Dr. Grip|French Dr. Grip]](grip)
* x2 [[Uni-Ball Signo]](tips)
* x2 [[Sailor IC Liquid Gel|Reynold Gel wave or Sailor gel]] (tips)
<br>[[File:LMB1.jpg|left|thumb|200px|Picture of the unknown markers]]<br clear=all>
===Additional items===
* Tape

===Text tutorial===
====Preparation====
# Cut the Dr. Grip grip in half.
# Sand the bottom of the Sailor/Gel wave tip until it's ~2.2 cm with a Signo tip on it.<br>[[File:LMB2.jpg|left|thumb|300px|]]<br clear=all>
# Empty the Ulmann eraser-marker barrel. Remove the printed markings if desired.

====Assembly====
# Screw the Signo tip onto the Sailor/Gel wave tip.
# Place the tip stack onto the marker's cap, then wrap some tape around it.<br>[[File:LMB3.jpg|left|thumb|300px|]]<br clear=all>
# Add half of Dr. Grip grip onto the cap.<br>[[File:LMB4.jpg|left|thumb|300px|]]<br clear=all>
# Repeat on the other side.

==References==
<references />

[[Category:Pen Mods]]

KillerGel

2026-10-03T22:37:54Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:Kilergel.jpg}}
|creator= Aaa
|style= [[Double Sided]]
|length= ~20cm
|weight= 16g
|cog=
}}
The '''KillerGel''' is a double-sided mod made by [[FPSB]] modder Aaa. The mod gained popularity after [[s777]] used it in the CV "Minovate 2nd".<ref>[https://www.youtube.com/watch?v=n3Yr1I7835k Minovate 2nd S777 combo]</ref>

==Construction==

===Parts needed===
List from FPSB V3:<ref name="Tutorial">https://thefpsb.penspinning.fr/viewtopic.php?f=61&t=4674</ref>

* 2x [[Dong-A Anyball|Star Gel Max]] (grip)
* 2x old [[Paper Mate Flexgrip Ultra]] (tips and body)
* 1x Tinten Killer body.
* 2x [[Sailor IC Liquid Gel|Gel Waves]] (cap)
* some grips

====Additional items===
* 2 inserts

===Text tutorial===
# Cut both ends of the Tintenkiller barrel and empty it.
# Cut the upper part of the Gel waves caps, file the interior if required.
# From the front, cut the last stripe of Flexgrip ultra body
# Roll your inserts around the small section of Flexgrip ultra body
# Screw the Flexgrip ultra tips on the Flexgrip ultra small body part
# Fit three G2 stripes over the paper-wrapped Flexgrip section, then add a thin grip stripe over them.
# Place the Flexgrip ultra small body package inside the Gel waves caps, it should fit snugly with the grips.
# Add a big block of Star Gel Max grips on the back of Gel waves caps
# Connect the Gel waves caps on the Tinten killer body

==References==
<references />

[[Category:Pen Mods]]

K7 Hybrid

2026-10-03T22:37:39Z

V 0 1 D: Apply independent tutorial corrections; retain disputed construction pending editor decision

{{Mod Infobox
|name=
|image={{#setmainimage:K7hybrid.jpg}}
|creator= iMatt
|style= [[Single Sided]]
|length= 19.5cm
|weight= 16g
|cog=
}}
The '''K7 Hybrid''' is a single sided mod made by iMatt. This mod is a hybrid between a [[SEVEN g3]] and a [[KUzu G3 (UPSB ver.)|KUzu G3]].

==Construction==

===Parts needed===
List from UPSB v3<ref name="Tutorial">https://web.archive.org/web/20131102171448/http://www.upsb.info/forum/index.php?showtopic=25117</ref>:
* 1x [[Pilot G3|G3]] (all parts)
* 1x [[Uni-Ball Signo|Signo DX]] (grip and tip)
* 1x [[Uni-Ball Signo|Signo Broad]] (grip and tip)
* 1x [[Pentel Hybrid Gel Grip]] (tip)
* 1x [[Pilot Hi-Tec-C]] (tip)
* 1x [[Zebra Hyperjell|Hyperjell]] (cap and grip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Zebra Hyperjell|Japanese Jimnie]] (cap)
* Optional: 3x Penwish rings

====Additional items===
* Tape
* An insert<br>[[File:k7insert.jpg|left|thumb|300px|Original insert]]<br clear=all>

===Text tutorial===
====Preparation====
# Remove the clip of the Jimnie cap.
# [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square and front bump.<br>[[File:Step-1K7H.jpg|left|thumb|300px|]]<br clear=all>
# Cut 0.9 cm of Hyperjell grip.
# Cut 1 cm and 0.3 cm of Signo Broad grip.

====Assembly====
=====Front side=====
# Stack the Hi-Tec-C tip on the plastic G3 tip, then stack the Signo tip onto the Hi-Tec-C tip (add Teflon tape between each tip to stabilize the assembly).<br>[[File:Step-2K7H.jpg|left|thumb|300px|]]<br clear=all>
# Fit the front components in this order: ring, 0.9 cm Hyperjell grip, ring, 1 cm Signo Broad grip, ring.
# Add two wraps of Vinyl tape on the ungripped part of the G3 front (should stop at the base of the Signo tip).<br>[[File:Step-5K7H.jpg|left|thumb|300px|]]<br clear=all>
# Add the Signo DX grip on the front of the G3 barrel.

=====Cap side=====
# Place the Signo tip onto the HGG tip (using Teflon tape if needed), then put both tips inside the Japanese Jimnie cap.<br>[[File:Step-6K7H.jpg|left|thumb|300px|]]<br clear=all>
# Put 0.3 cm of Signo Broad grip then the remaining Hyperjell inside the Japanese Jimnie cap.<br>[[File:Step-7K7H.jpg|left|thumb|300px]]<br clear=all>
# Add tape on the G3 body then connect it to the Jimnie cap.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=jV7k_e4_z64</youtube>

Video tutorial by Super Nova.

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]

VAIN's G3

2026-10-03T22:02:20Z

V 0 1 D: Resolve VAIN tutorial review; retain confirmed measurements, add creator tape/backplug notes and HF donor, restore original photos

{{Mod Infobox
|name=
|image={{#setmainimage:Vaing.png}}
|style= [[Single Sided]]
|length= ?cm
|weight= ? g
|cog=
}}
'''VAIN's G3''' designates each G3 mod made by [[JEB]] spinner VAIN.

==Construction of VAING*==

===Parts needed===
List from VAIN's Blog<ref name="tutorial"> [http://xxxholicvain.blog136.fc2.com/blog-entry-86.html VAIN’s blog]</ref>:
* 1x [[Pilot G3|G3]] (barrel, grip, and tip)
** The original tutorial doesn't specify which type of G3 tip is used.
* 1x [[Zebra Hyper Jell]] (grip and cap)
* 1x [[Signo]] (grip and tip)
** The original tutorial doesn't specify which type of Signo grip is used.
* 1x [[Pentel Hybrid Gel Grip]] (grip)
* 1x [[Pentel RSVP]] (grip)
* 1x [[Dong-A Anyball]] (grip)
====Additional Items====
* Tape
* An insert

===Text tutorial===
====Preparation====
# [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square and front bump.
# Cut the clip of the Hyperjell cap.
# Cut 2.8 cm of Hyper Jell grip.
# Cut 8 mm of the Signo grip.
# Cut 4 rings of Anyball grip.
# Cut a 9 mm part of flat G3 grip.

====Assembly====
=====Front side=====
# Place the 9 mm part of flat G3 grip on the front of the G3 barrel.
# Stack the tip on the G3 front: Signo tip onto the G3 tip.
# Cover the remaining visible part of G3 and the tip stack with a full HGG grip (ring side first).

=====Cap side=====
# Fold the Hyperjell grip and fit it inside the RSVP grip, leaving approximately 8–10 mm exposed. Use the 2.8 cm Hyperjell section.
# Cover the visible part of the Hyperjell grip with the cut Signo grip.
# Place the assembly inside the Hyperjell cap (side with Signo grip first).
# Wrap some tape on the back of the G3 body and connect it to the Hyperjell cap.
# Add 4 rings of Anyball on the Hyperjell cap.

{{Mod Infobox
|name=
|image={{#setmainimage:Vaing2.jpg}}
|style= [[Single Sided]]
|length= ?cm
|weight= ? g
|cog=
}}

==Construction of VAING*2==

===Parts needed===
List from Ponkotu's blog<ref name="Tutorial">http://annkou2.blog105.fc2.com/blog-entry-856.html</ref>:
* 2x [[Pilot G3|G3]] (1 barrel, 2 grip and 1 plastic tip)
* 1x [[Zebra D1k]] (tip, grip and cap)
* 1x [[Pilot Frixion Colors]] (cap and rubber part)
* 1x [[Pilot G1]] (tip)
* 1x [[Uni-Ball Signo]] (tip)
* 3x Pentel Hybrid Fine (3 tips and 1 rear piece)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Uni-Ball Lakubo]] (grip)
* a stripe of any grip
====Additional Items====
* Tape
* An insert

===Text tutorial===
# Prepare the G3 barrel by removing its grip and filing the front protrusions. Keep its grip and the grip from a second G3.
# Remove the Frixion rear eraser and its internal piece. Wrap tape around the eraser and fit it inside the G3 front.<br>[[File:VainG3_s2_02.jpg|left|thumb|200px]]<br clear=all>
# Stack the front tips in this order: plastic G3, Signo, G1. Secure the stack with tape.<br>[[File:VainG3_s2_03.jpg|left|thumb|200px]]<br clear=all>
# Fit two Anyball blocks to the G3 front, attach the tip stack, and cover it with the Lakubo grip.<br>[[File:VainG3_s2_04.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s2_05.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s2_06.jpg|left|thumb|200px]]<br clear=all>
# Slit the second G3 grip lengthwise and fit it inside the first G3 grip.<br>[[File:VainG3_s2_07.jpg|left|thumb|200px]]<br clear=all>
# Stack three Hybrid Fine tips and secure them with tape. Fit a suitable small grip over the stack and insert it into the Frixion cap.<br>[[File:VainG3_s2_08.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s2_09.jpg|left|thumb|200px]]<br clear=all>
# Insert the nested G3 grips, followed by one Anyball block, into the cap.<br>[[File:VainG3_s2_10.jpg|left|thumb|200px]]<br clear=all>
# Overgrip the cap with seven D-1K blocks followed by two Anyball blocks. Fit the Hybrid Fine rear piece where the Frixion eraser was.<br>[[File:VainG3_s2_11.jpg|left|thumb|200px]]<br clear=all>
# Attach the cap to the G3 rear, adding tape as needed to secure the fit and adjust the balance.<br>[[File:Vaing2.jpg|left|thumb|200px]]<br clear=all>

{{Mod Infobox
|name=
|image={{#setmainimage:Vaing3.jpg}}
|style= [[Single Sided]]
|length= ?cm
|weight= ? g
|cog=
}}

==Construction of VAING*3==

===Parts needed===
List from VAIN's blog<ref name="Vain g3 Tutorial">http://xxxholicvain.blog136.fc2.com/blog-entry-87.html?_x_tr_sch=http&_x_tr_sl=auto&_x_tr_tl=en&_x_tr_hl=fr&_x_tr_pto=wapp</ref>:
* 1x [[Pilot G3|G3]] (barrel, grip, and 1 plastic tip)
* 1x [[Pentel Color Twin]] (body)
* 1x [[Pilot Frixion Colors]] (cap)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Pentil Hybrid Gel Roller]] (backplug)
* 1x [[Uni-Ball Signo|Signo DX]] (grip and tip)
* 1x [[Zebra Tect 2way]] (silicone O-ring)
* 2x Pentel Hybrid Fine 0.4 (1 grip and 2 tips)
* 1x earpiece for canal-type earphone
** VAIN stated that the one used was probably from audio-technica

====Additional Items====
* Tape
* An insert

===Text tutorial===
====Preparation====
# Cut 5 blocks of Anyball grip.
# [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square and front bump.
# Cut the Hybrid fine grip to 1 cm.
# Cut 3 cm from the front of the CT barrel (tip included).
# Cut the section with stripes from the flat part of the G3 grip.
# Cut G3 grip with the square vertically two times (one part should have all 4 squares)
# Turn the Earphone piece inside out, then cut the cylindrical part from the dome.
# Cut the dome part of the HGR backplug.<br>[[File:{{#setmainimage:vaing3ear.jpg}}|thumb|left||200px|]]<br clear=all>

====Assembly====
=====Front side=====
# Put 1 cm of Hybrid fine grip then the Tect ring.
# Roll the square part of G3 grip and put it inside the G3 front. Screw back the G3 tip.
# Stack the Hybrid Fine tip onto the G3 tip, then stack the Signo tip onto the Hybrid Fine tip. Secure the Signo/Hybrid Fine joint with tape.
# Cover the visible portion of G3 front with the Signo DX grip.

=====Cap side=====
# Remove the internal plastic piece from the Frixion cap. Trim the protrusion from the HGR backplug, join it to that retained internal piece, and fit the joint to the G3 rear.<br>[[File:{{#setmainimage:vaing3back.jpg}}|thumb|left|200px|]]<br clear=all>
# Place the stripe section of the G3 grip on the CT part.
# Place the cylinder section of the earplug piece on the CT part.<br>[[File:{{#setmainimage:vaing3cap.jpg}}|thumb|left|200px|]]<br clear=all>
# Place the second Hybrid Fine tip inside the Frixion cap, then insert the prepared CT section.
# Connect the G3 back to the Frixion cap.
# Add the 5 stripes of Anyball grip on the Frixion cap.

{{Mod Infobox
|name=
|image={{#setmainimage:vsg-3.jpg}}
|style= [[Single Sided]]
|length= 20.3cm
|weight= 14g
|cog=
}}

==Construction of VSG3==

===Parts needed===
List from VAIN's Youtube channel:
* 1x [[Pilot G3|G3]] (barrel, grip, Rubber stopper inside the cap, and plastic tip)
* 1x [[Zebra Jim-knock]] (tip and grip )
* 1x [[Uni-Ball Lakubo]] (grip)
* 1x [[Pilot Frixion Colors]] (cap)
* 1x [[Pilot Hi-Tec C Maica]] (tip)
* 1x [[Uni-Ball Signo|Signo DX]] (tip and grip)
====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 barrel]], retaining its grip, plastic tip and cap rubber stopper. Remove the backplug.
# Cut an approximately 9 mm Signo grip section, at the third dimple from one end, and fit it to the G3 front.
# Place the G3 cap rubber inside its plastic tip and screw the tip back onto the barrel.
# Fit the Jimnie Knock plastic tip over the G3 tip, then cover the stack with a whole Lakubo grip.
# Empty the Frixion Colors cap, retaining and replacing its outer eraser.
# Remove approximately 1 mm from the smooth end of the Jimnie Knock grip. Cut the retained G3 grip lengthwise, roll it and insert it into the Jimnie Knock grip.
# Insert a Hi-Tec-C tip into the Frixion cap, followed by the nested grips.
# Cut a second Signo section at the fourth dimple from the opposite end and fit it over the Frixion cap. Stretch it cautiously if needed.
# Add a little tape around the G3 rear to secure the cap and adjust balance, then attach it. Vary the amount of nested grip if further balance adjustment is needed.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=xMLr96uIyPQ</youtube>

Video tutorial by VAIN.

{{Mod Infobox
|name=
|image={{#setmainimage:Flare Vain G3.jpg}}
|style= [[Single Sided]]
|length= 19.5cm
|weight= 13g
|cog=
}}

==Construction of Flare Vain G3==

===Parts needed===
List from VAIN's Youtube channel<ref name="Flare Vain G3 tutorial">https://www.youtube.com/watch?v=eR5-DNykb50&feature=emb_title</ref>:
* 1x [[Pilot G3|G3]] (barrel, grip, Rubber stopper inside the cap, and plastic tip)
* 1/2x [[Zebra Hyper Jell]] (grip)
* 1x [[Zebra Jimnie]] (cap)
* 1x [[Pentel Hybrid Gel Grip]] (tip and grip)
* 1x [[Pilot Frixion Colors]] (Rubber part on the end of the cap)
* 1x [[Pilot Hi-Tec-C]] (tip)
* 1x Ohto Needlepoint (grip)
* 1x [[Pentel Hybrid Gel Roller]] (tip)
* 1x KILAT Oil-based Ballpen Knock type (grip)
** (Can be subbed with Anyball grip)
====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 front]]. Fit a 1.1 cm section of the creator’s unidentified Needlepoint-like grip; adjust its length if needed to suit the stretched HGG grip.
# Stack the front tips in this order: G3, HGR, then Hi-Tec-C. Place the G3 cap rubber between HGR and Hi-Tec-C to join them, then cover the front with the HGG grip.
# Cut and smooth the Jimnie cap clip. Remove the Frixion eraser and fit it into the HGG tip. Wrap vinyl tape around the protruding rubber end that does not fit into the tip.
# Push this tip/rubber assembly to the outer end of the Jimnie cap, keeping the tape in position.
# Cut 2.9 cm of Hyperjell grip from its unrounded end and 5 mm from a rounded end. A second grip may be needed to obtain both sections.
# Cut the smooth G3 grip section lengthwise, roll it, and insert it into the long Hyperjell section, followed by the 5 mm Hyperjell section.
# Insert this nested grip assembly into the Jimnie cap, followed by one KILAT grip block. The creator identifies KILAT as an Anyball substitute.
# The creator wrapped white tape around his red cap to conceal its colour; this tape also affects the balance.
# Tape the G3 rear as needed and attach the prepared cap. Adjust tape and balance to suit the cap colour and grip lengths used.<br>[[File:Flare Vain G3.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s5_02.jpg|left|thumb|200px]]<br clear=all>

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=gZ1od3jJDsA</youtube>

Video tutorial by Vore-Tex.

{{Mod Infobox
|name=
|image={{#setmainimage:diVAIN.jpg}}
|style= [[Single Sided]]
|length= ~20.5cm
|weight= ~17g
|cog=
}}

==Construction of Di*vain==

===Parts needed===
List from VAIN's blog<ref name="DivainTutorial">[http://xxxholicvain.blog136.fc2.com/blog-entry-120.html Di*vain tutorial], VAIN’s blog.</ref>:
* 1x [[Pilot G3|G3]] (barrel and plastic tip)
* 1x [[Zebra Jimnie]] (cap)
* 1x [[Uni-Ball Lakubo]] (grip)
* 1x [[Pilot SuperGrip]] (grip)
* 1x [[Uni-Ball Signo]] (tip)
* 1x Ohto Needlepoint (grip)
* 2x [[Pentel Hybrid Gel Roller]] (tips)
* 1x Pentel Hybrid Fine (HF tip)
* 1x [[Pentel RSVP]] (grip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Zebra Tect 2way]] (1 Silicone ring)

====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 barrel]].
# Remove the Jimnie cap clip. Inside the cap, insert an HGR tip followed by an HF tip.
# Insert a whole RSVP grip followed by 6 mm of Needlepoint grip.<br>[[File:VainG3_s6_01.jpg|left|thumb|200px]]<br clear=all>
# At the G3 front, fit three SuperGrip blocks, one Anyball block, one Tect ring, then a Lakubo grip.
# Stack the front tips in this order: Signo, G3, then HGR. Glue the stack together.
# Fit the stack inside the Lakubo grip. The creator specifies that the grip alone connects the stack to the G3; glue may also secure this joint if it wobbles.<br>[[File:VainG3_s6_02.jpg|left|thumb|200px]]<br clear=all>
# Add an optional barrel insert, wrap vinyl tape around the G3 rear and attach the prepared Jimnie cap.

{{Mod Infobox
|name=
|image={{#setmainimage:VAING0.jpg}}
|style= [[Single Sided]]
|length= ~19cm
|weight= ?g
|cog=
}}

==Construction of VAIN G*0==

===Parts needed===
List from VAIN's blog<ref name="VAIN G*0 tutorial">http://xxxholicvain.blog136.fc2.com/blog-entry-109.html</ref>:
* 1x [[Pilot G3|G3]] (barrel, rubber stopper from the cap, and plastic tip)
* 1x [[Pilot Frixion Colors]] (cap)
* 2x [[Pentel Hybrid Gel Grip]] (2 grips)
* 1x Pentel Hybrid Fine (tip)
* 1x [[Uni-Ball Signo]] (tip)
* 1x [[Pilot SuperGrip]] (grip)
* 2x JELL-BE (tips)
* 1x [[Dong-A Anyball]] (grip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
This describes the initial construction. In the creator’s 31 May 2016 revision, the front Signo tip became G1 and the outer cap Anyball became the grip fitted to a Kuru Toga tip.
# [[G3 Barrel Preparation|Prepare the G3 barrel]], retaining its backplug.
# Fit three Anyball blocks to the G3 front.
# Stack the front tips in this order: G3, Jell Be, then Signo. Cover the stack with an HGG grip.
# Empty the Frixion cap, removing all removable internal pieces and its eraser rubber.
# Inside the cap, insert an HF tip followed by a Jell Be tip, then a whole, unstretched HGG grip.
# Fit four or five Anyball blocks over the cap.
# Place the G3 cap’s black rubber stopper into the opening where the Frixion eraser was.
# Attach the prepared cap to the G3 rear, keeping the G3 backplug in place.<br>[[File:VAING0.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s7_02.jpg|left|thumb|200px]]<br clear=all>

{{Mod Infobox
|name=
|image={{#setmainimage:Reunion VAIN G0.jpg}}
|style= [[Single Sided]]
|length= 20/20.5cm
|weight= 14.54g
|cog=
}}

==Construction of Reunion VAIN G*0==

===Parts needed===
List from VAIN's blog<ref name="Reunion VAIN G*0 tutorial">http://xxxholicvain.blog136.fc2.com/blog-entry-142.html</ref>:
* 1x [[Pilot G3|G3]] (barrel and metal tip)
* 1x [[Zebra Hyper Jell|Jimnie]] (cap)
* 2x [[Pentel Hybrid Gel Grip]] (2 grips, 1 tip)
* 1x [[Pilot SuperGrip|SuperGrip Bp]] (tip)
* 2x JELL-BE (tips)
* 1x [[Pilot Dr. Grip]] (metal ring)
* 1x [[Uchida Marvy Marker 1300]] (backplug)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Uni-Ball Signo|Signo Broad]] (grip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 barrel]].
# Cut 1.4 cm of Signo Broad grip and fit it to the G3 front.<br>[[File:VainG3_s8_03.jpg|left|thumb|200px]]<br clear=all>
# Stack the front tips in this order: metal G3, plastic SuperGrip, then Jell Be. The creator identifies the first two donors tentatively; the metal G3 need not fit tightly onto his worn barrel.<br>[[File:VainG3_s8_04.jpg|left|thumb|200px]]<br clear=all>
# Cover the stack with an HGG grip.<br>[[File:VainG3_s8_05.jpg|left|thumb|200px]]<br clear=all>
# Fit a Dr. Grip ring to the outer grip end to retain the Jell Be tip.
# Inside a Jimnie cap, insert an HGG tip followed by a Jell Be tip. Tape between these tips is optional.<br>[[File:VainG3_s8_06.jpg|left|thumb|200px]]<br clear=all>
# Insert a whole HGG grip, rimless end first.<br>[[File:VainG3_s8_07.jpg|left|thumb|200px]]<br clear=all>
# Add cap grips to adjust balance. The creator uses one Anyball block and the grip from the inexpensive Kuru Toga tip.
# Fit an old-style Marvy marker backplug into the G3 rear. Adjust the fit carefully if using an insert; the creator reports that newer Marvy backplugs do not fit and notes that his own G3 barrel was already cracked.<br>[[File:VainG3_s8_08.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s8_09.jpg|left|thumb|200px]]<br clear=all>
# Attach the prepared Jimnie cap.<br>[[File:Reunion VAIN G0.jpg|left|thumb|200px]]<br clear=all><br>[[File:VainG3_s8_02.jpg|left|thumb|200px]]<br clear=all>

{{Mod Infobox
|name=
|image={{#setmainimage:Ruby Eclipse.jpg}}
|style= [[Single Sided]]
|length= 20.2cm
|weight= ?g
|cog=
}}

==Construction of Ruby Eclipse==

===Parts needed===
List from the video below:
* 1x [[Pilot G3|G3]] (barrel, grip)
* 1x [[Zebra Hyper Jell]] (grip)
* 1x [[Pilot SuperGrip]] (grip and tip)
* 1x [[Pentel Hybrid Gel Grip]] (tip and grip)
* 1x [[Uni-Ball Signo|Signo Dx]] (tip and grip)
* 1x [[Uni-Ball Air]] (cap)
* 1x Ohto Needlepoint (grip)
* 1x [[Pentel Hybrid Gel Roller]] (tip)
* 1x old [[Zebra Jell-Be]] (tip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 barrel]], retaining the striped section of its grip.
# Trim the Uniball Air cap clip, leaving approximately 2.4–2.5 cm measured from its outer end, as pictured in the source.
# Inside the Air cap, insert the HGR tip followed by the Jell Be tip.
# Cut a 1.7 cm Hyperjell grip section and insert it into the cap.
# Cut a 6 mm Signo grip section, roll it and fit it inside the striped G3 grip section. Insert this nested assembly into the cap.
# Cut the rim from the HGG grip and insert it last, then fit the cap to the G3 rear.
# At the G3 front, fit an 8 mm Needlepoint section followed by a 5 mm Hyperjell section.
# Fit the SuperGrip grip in reverse orientation, striped end toward the barrel.
# Stack the front tips in this order: SuperGrip, HGG, then Signo.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=tpS4TWpNEUM</youtube>

Video tutorial by VAIN

{{Mod Infobox
|name=
|image={{#setmainimage:bluedroplet.jpg}}
|style= [[Single Sided]]
|length= 19.5cm
|weight= ?g
|cog=
}}

==Construction of Blue Droplet==

===Parts needed===
List from VAIN's blog<ref name="Blue Droplet tutorial">http://xxxholicvain.blog136.fc2.com/blog-entry-156.html</ref>:
* 1x [[Pilot G3|G3]] (barrel, grip and plastic tip)
* 1x [[Uni-Ball Air]] (cap)
* 1x [[Zebra Hyper Jell]] (grip)
* 1x [[Ohto Needlepoint]] (grip)
* 1x Uni-Ball Jetstream (grip)
* 1x [[Dong-A Anyball]] (grip)
* 1x [[Pentel Hybrid Gel Grip]] (tip)
* 1x [[Daiso Gel Roller]] (tip)
* 1x [[Uni-Ball Signo|Signo Dx]] (tip and grip)
* 1x [[Pilot G1]] (tip)
* 1x [[Sakura Ballsign]] (backplug)
* 1x [[Zebra Tect 2way]] (grip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
====Preparation====
# [[G3 Barrel Preparation|Prepare the G3 barrel]] by filing the square and front bump.
# Cut the clip of the Air cap.
# Cut around 6/7 mm of Needlepoint grip.
# Cut 7 mm and around 2.7 cm of the Hyperjell grip.
# Cut a 2-block KILAT grip section; the creator describes it as an Anyball substitute.

====Assembly====
=====Front side=====
# Place the 7 mm of Needlepoint grip and then the 7 mm of Hyperjell grip on the front of the G3 barrel.
# Stack the tip on the G3 front following this order: G3, Gel roller and G1. Wrap tape to make the stack stable.
# Cover the remaining visible part of G3 and the tip stack with a full Jetstream grip.

=====Cap side=====
# Inside the AIR cap, insert the HGG tip and a KILAT grip section to secure it, followed by approximately 2.7 cm of Hyperjell grip, a Tect grip section, and the Ballsign backplug. Push the backplug into the Tect grip.<br>[[File:bluedroplet1.jpg|left|thumb|200px]]<br clear=all>
# Connect the back of the G3 on the Air cap.

{{Mod Infobox
|name=
|image={{#setmainimage:Vainoriginalg3.jpg}}
|style= [[Single Sided]]
|length= 20.8cm
|weight= 15.37g
|cog=
}}

==Construction of VAIN's original G3==

===Parts needed===
List from the video below:
* 1x [[Pilot G3|G3]] (barrel, grip, and metal tip)
* 1x Hi-Tech Point V5 (cap)
* 1x [[Pentel Hybrid Gel Grip]] (tip)
* 1x [[Uni-Ball Signo|Signo Broad]] (tip and grip)
* 1x [[Pilot Dr. Grip]] (metal ring)
* 1x [[Pilot Supergrip]] ballpoint (plastic tip)
* 1x [[Nitomn Stalogy]] mechanical pencil (removable clicker component)
* 1x [[Uni-Ball Lakubo|Laknock]] (grip)
* 1x [[Zebra Hyper Jell|Jim Knock]] (grip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
This is the creator’s '''Shiny Story''' build, previously headed “VAIN’s original G3” on the wiki.
# [[G3 Barrel Preparation|Prepare the G3 barrel]]. Cut 1.3 cm of Signo Broad grip and fit it to the front. The creator corrects the video’s printed 1.8 cm measurement to 1.3 cm in its description.
# Fit an HF/HGG tip over the plastic tip from a SuperGrip ballpoint.
# Fit the Laknock grip in reverse orientation over this assembly, then add the metal G3 tip and the inner Dr. Grip ring at the outer end.
# Remove the V5 cap clip, coloured end piece and internal spring; replace the end piece after emptying the cap.
# Cut 2.5 cm of Jimnie Knock grip. Insert the removable BT mechanical-pencil clicker component into its barrel-side end.
# Insert the Signo tip and prepared grip into the V5 cap, with the BT component toward the barrel.
# Tape the G3 rear and the exposed grip as needed to secure the joint and adjust balance, then attach the cap.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=ZHG0YVnPPoo</youtube>

Video tutorial by VAIN

{{Mod Infobox
|name=
|image={{#setmainimage:under'Mebius'.jpg}}
|style= [[Single Sided]]
|length= 19.8cm
|weight= g
|cog=
}}

==Construction of under"Mebius"==

===Parts needed===
List from the video below:
* 2x [[Pilot G3|G3]] (barrel, grip, plastic tip, rubber stopper and metal tip)
** VAIN's one uses tinted barrel
* 1x [[Pilot Frixion Colors]] (cap)
* 1x [[Zebra Hyper Jell]] (grip)
* 1x [[Zebra D1-k]] (grip)
* 1x [[Pilot Hi-Tec-C]] (tip)
* 1x [[Pilot SuperGrip]] (grip)
* 1x [[Uni-Ball Signo|Signo DX]] (grip)
* 1x [[Zebra Jell.Be]] (tip)
* 1x Pentel Hybrid Fine (backplug)
* 1x Zebra Rubber 80 (tip)
* 1x [[Dong-A Anyball]] (grip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 barrel]] and remove its backplug. Fit 1.2 cm of Signo DX grip to the front.
# Remove the G3 cap rubber and trim its narrow projection. Insert it into the G3 front until its shoulder sits at the barrel opening.
# Replace the plastic G3 tip, fit a whole SuperGrip grip, then stack the Hi-Tec-C and metal G3 tips over the plastic tip.
# Empty the Frixion Colors cap, removing its eraser and internal piece.
# Screw the Jell Be tip onto the Rubber 80 tip. Insert this stack into the cap with Jell Be toward the barrel and Rubber 80 toward the cap’s outer end.
# Cut 3.1–3.2 cm from the rounded end of the Jimnie Knock/Hyperjell grip and insert it rounded end first.
# Overgrip the cap with three G3 grip blocks, two Anyball blocks and three D1-K blocks, following the source’s layout.
# Cut an HF backplug, retaining 8 mm from the rounded end to the flat boundary, and fit it at the cap’s outer end.
# Add a small amount of tape at the G3 rear rim for a firmer fit and attach the cap.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=AHPAggRPAT4</youtube>

Video tutorial by VAIN

{{Mod Infobox
|name=
|image={{#setmainimage:Yukigetsuki.jpg}}
|style= [[Single Sided]]
|length= 20.3cm
|weight= 13.69g
|cog=
}}

==Construction of Yukigetsuki==

===Parts needed===
List from the video below:
* 1x [[Pilot G3|G3]] (barrel, plastic tip, and rubber stopper)
** VAIN's one uses a tinted barrel
* 1x [[Uni-Ball Vision Elite]] (cap)
* 2x [[Zebra Hyper Jell|Jim Knock]] (grip)
**Vain uses both Hyperjell and Jim knock.
* 1x [[Zebra D1-k]] (grip)
* 1x [[Pilot Hi-Tec-C]] (tip)
* 1x [[Uni-Ball Signo]] (tip)
* 1x [[Pentel RSVP]] (grip)
* 1x [[Sailor IC Liquid Gel]] (tip)
* 1x [[Dong-A Anyball]] (grip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
# Disassemble the Vision Elite cap, removing its coloured end piece and internal rubber. Trim the clip, retaining approximately 1.9 cm, then replace the end piece.
# Place the G3 cap rubber inside the Hi-Tec-C tip and insert this assembly into the cap.
# Insert a whole RSVP grip. Add approximately 2 mm of Jimnie Knock grip if needed for fit and balance; this spacer is optional.
# [[G3 Barrel Preparation|Prepare the G3 barrel]] and remove its backplug.
# Add an optional 3.1 cm insert to the front grip area.
# Fit five Anyball blocks to the G3 front.
# Stack the front tips in this order: plastic G3, Sailor Gel, then Signo. Cover them with a whole Hyperjell grip, reversed so its flat side enters first.
# Push the covered stack firmly onto the front. The G3 plastic tip can be screwed back on if needed; the creator also allows leaving it held by the tight grip fit.
# Add an optional barrel insert and attach the prepared Vision Elite cap.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=Y8GgQGaUZJs</youtube>

Video tutorial by VAIN

{{Mod Infobox
|name=
|image={{#setmainimage:Homuranagi.jpg}}
|style= [[Single Sided]]
|length= 20.8cm
|weight= 15.56g
|cog=
}}

==Construction of Homuranagi==

===Parts needed===
List from the video below:
* 1x [[Pilot G3|G3]] (barrel, grip, and plastic tip)
** VAIN's one uses a tinted barrel
* 1x Hi-Tech Point V5 (cap)
* 1x [[Pilot G2]] (grip)
* 1x [[Zebra Hyper Jell|Jim Knock]] (grip)
**Vain uses both Hyperjell and Jim knock.
* 1x [[Uni-Ball Signo]] (grip)
* 1x Pentel Hybrid Fine (grip)
* 1x [[Pilot Hi-Tec-C]] (tip)
* 1x [[Pilot SuperGrip]] ballpoint (plastic tip)
* 1x [[Pilot G1]] (tip)
* 1x [[Pilot AirBlanc]] (tip)

====Additional Items====
* Tape
* An insert

===Text tutorial===
# [[G3 Barrel Preparation|Prepare the G3 barrel]], removing the backplug and ink. Retain its grip.
# Fit a 7.5 mm smooth G3 grip section followed by a 9 mm Signo DX section to the G3 front.
# Replace the plastic G3 tip and stack a SuperGrip ballpoint plastic tip, Hi-Tec-C tip and G1 tip over it, in that order.
# Cover the stack with a whole G2 grip in reverse orientation, striped end toward the barrel.
# Empty the Hi-Tec Point V5 cap by removing its end piece and internal spring, then replace the end piece.
# Inside the V5 cap, insert a G1 tip followed by an Airblanc tip.
# Cut 2.4 cm of Hyperjell grip. Cut 1.6 cm of HF grip, roll it and insert it into the Hyperjell section.
# Cut 7 mm from the striped G3 grip section, roll it and insert it into the same Hyperjell section. Insert the nested grips into the cap.
# Add an optional barrel insert, tape the G3 rear and attach the prepared cap.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=wKXhIDuYME4</youtube>

Video tutorial by VAIN

==References==
<references />

[[Category:Pen Mods]] [[Category:G3 Mods]]

KAtts Acrylic Bullet Mod

2026-10-03T22:02:15Z

V 0 1 D: Resolve tutorial using wiki Anyball block counts and original construction photographs

{{Mod Infobox
|name=
|image={{#setmainimage:KABM.jpg}}
|creator= [[kAtts]]
|style= [[Double Sided]]
|length= ~23cm
|weight= ~38g
|cog= cop
}}
The '''kAtts Acrylic Bullet mod''' is a double-sided mod made by [[kAtts]] which he used in his [[Pen Spinning World Tournament 2019]] participation.

Contrary to what its name implies, the mod does not use an acrylic tube for the barrel. It uses a polycarbonate tube.

==Construction==

===Parts needed===

Parts list from the video below:
* x1 Polycarbonate tube (13 mm OD, 11 mm ID)
* x2 [[Pilot Dr. Grip]] (grip)
* x1 [[Pilot AirBlanc]] (grip)
* x2 Nato bullet 7.62×51 mm
* x~6 [[Dong-A Anyball]] (Grip) (2 colored ones)
* x1 [[Zebra Hyper Jell]] (Grip)
====Additional items===
* An insert

===Text tutorial<ref>[https://penmodding.pm/archives/6659 KAtts Acrylic Bullet Mod tutorial], PenModding.pm.</ref>===
====Preparation====
# Cut your Dr. Grip grips into two ~1.5 cm-long sections.
# Cut two 8-block pieces of Anyball grip, six 1-block pieces (including two colored ones), four 3-block pieces, and four 2-block pieces (including two colored ones).
# Cut a 13 mm outer-diameter, 11 mm inner-diameter acrylic tube to 20 cm.
# Cut your AirBlanc grip to two 1 cm sections.
# Cut your Hyper Jell to ~9–10 mm.

====Assembly====

# Place the grips in this order: one stripe of Anyball grip, then a colored one, then ~1.5 cm of Dr. Grip grip then one block of Anyball on the acrylic tube, leave some space to prepare the rest of the gripping.<br>[[File:KAttsAcrylicStep01.jpg|left|thumb|200px]]<br clear=all>
# Put on the acrylic tube 8-block of Anyball grip and fold it on itself from the exterior side.<br>[[File:KAttsAcrylicStep02.jpg|left|thumb|200px]]<br clear=all>
# Put 1 cm of AirBlanc grip inside the acrylic tube and insert the NATO bullet tip backwards into it, the AirBlanc grip should block it. ~10 mm of it should remain visible.<br>[[File:KAttsAcrylicStep03.jpg|left|thumb|200px]]<br clear=all>
# Put ~10 mm of Hyper Jell grip, then overgrip it with 3 blocks of Anyball grip.<br>[[File:KAttsAcrylicStep04.jpg|left|thumb|200px]]<br clear=all>
# Unfold the 8 blocks of Anyball grip over the tip part, and adjust.<br>[[File:KAttsAcrylicStep05.jpg|left|thumb|200px]]<br clear=all>
# Overgrip the 8 blocks of Anyball grip in this order: 2 blocks of Anyball, 2 blocks of Anyball (colored) then 3 blocks of Anyball.<br>[[File:KAttsAcrylicStep06.jpg|left|thumb|200px]]<br clear=all>
# (Optional) Add an insert.
# Repeat on the other side.<br>[[File:KAttsAcrylicStep07.jpg|left|thumb|200px]]<br clear=all>

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=T0xKFGXpooE</youtube>

Video tutorial by kAtts.

==References==
<references />

[[Category:Pen Mods]]

File:VainG3 s8 09.jpg

2026-10-03T21:59:41Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/2018012907341061d.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/2018012907341061d.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 08.jpg

2026-10-03T21:59:39Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073409e0b.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073409e0b.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 07.jpg

2026-10-03T21:59:38Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073409fd5.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073409fd5.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 06.jpg

2026-10-03T21:59:37Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073407604.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073407604.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 05.jpg

2026-10-03T21:59:35Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073406ce7.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073406ce7.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 04.jpg

2026-10-03T21:59:33Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073416250.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073416250.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 03.jpg

2026-10-03T21:59:32Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/201801290734156f5.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/201801290734156f5.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s8 02.jpg

2026-10-03T21:59:19Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073415d3b.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://blog-imgs-118.fc2.com/x/x/x/xxxholicvain/20180129073415d3b.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s7 02.jpg

2026-10-03T21:59:16Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-95.fc2.com/x/x/x/xxxholicvain/Cju-b4XWYAA4eIM.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-95.fc2.com/x/x/x/xxxholicvain/Cju-b4XWYAA4eIM.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s6 02.jpg

2026-10-03T21:59:14Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://penmodding.pm/wp-content/uploads/1_2016062223373695f.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://penmodding.pm/wp-content/uploads/1_2016062223373695f.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s6 01.jpg

2026-10-03T21:59:12Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: https://penmodding.pm/wp-content/uploads/3_20160622233733022.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: https://penmodding.pm/wp-content/uploads/3_20160622233733022.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s5 02.jpg

2026-10-03T21:59:11Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-98.fc2.com/x/x/x/xxxholicvain/2016123007342504f.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-98.fc2.com/x/x/x/xxxholicvain/2016123007342504f.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

Jeb

2026-10-03T21:58:58Z

V 0 1 D: Redirected page to JEB

#REDIRECT [[JEB]]

File:VainG3 s2 11.jpg

2026-10-03T21:58:50Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 10.jpg

2026-10-03T21:58:49Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/00000_20150214142807d01.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/00000_20150214142807d01.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 09.jpg

2026-10-03T21:58:48Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000000_20150214142638bea.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000000_20150214142638bea.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 08.jpg

2026-10-03T21:58:47Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/0000000_20150214142637e85.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/0000000_20150214142637e85.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 07.jpg

2026-10-03T21:58:46Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/0000_201502141428089fa.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/0000_201502141428089fa.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 06.jpg

2026-10-03T21:58:44Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/00000000000_20150214142632342.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/00000000000_20150214142632342.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 05.jpg

2026-10-03T21:58:43Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/0000000000000000000.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/0000000000000000000.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 04.jpg

2026-10-03T21:58:42Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000000000.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000000000.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 03.jpg

2026-10-03T21:58:41Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000000000000.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/000000000000.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:VainG3 s2 02.jpg

2026-10-03T21:58:39Z

V 0 1 D: Original construction photograph for VAIN's G3. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/00_20150214142811496.jpg Photographs reproduced from VAIN and Ponkotu original tutorials.

== Summary ==
Original construction photograph for [[VAIN's G3]]. Source image: http://blog-imgs-77.fc2.com/a/n/n/annkou2/00_20150214142811496.jpg
Photographs reproduced from VAIN and Ponkotu original tutorials.

File:KAttsAcrylicStep07.jpg

2026-10-03T21:57:47Z

V 0 1 D: Original construction photograph for KAtts Acrylic Bullet Mod. Source image: https://penmodding.pm/wp-content/uploads/7-1-768x180.jpg Original tutorial photographs by KAtts, reproduced by PenModding.pm.

== Summary ==
Original construction photograph for [[KAtts Acrylic Bullet Mod]]. Source image: https://penmodding.pm/wp-content/uploads/7-1-768x180.jpg
Original tutorial photographs by KAtts, reproduced by PenModding.pm.

File:KAttsAcrylicStep06.jpg

2026-10-03T21:57:46Z

V 0 1 D: Original construction photograph for KAtts Acrylic Bullet Mod. Source image: https://penmodding.pm/wp-content/uploads/6-2-768x403.jpg Original tutorial photographs by KAtts, reproduced by PenModding.pm.

== Summary ==
Original construction photograph for [[KAtts Acrylic Bullet Mod]]. Source image: https://penmodding.pm/wp-content/uploads/6-2-768x403.jpg
Original tutorial photographs by KAtts, reproduced by PenModding.pm.