Fen Spinner Wiki - User contributions [en]

Zero-EX mod

2025-03-25T16:08:14Z

Probunga: /* Additional Items */

{{Mod Infobox
|name=
|image={{#setmainimage:Zeroexmod.jpg}}
|creator= Hubik
|style= [[Double Sided]]
|length= 22.5cm
|weight= 17g
|cog= cop
}}
The '''Zero-EX mod''' is a double sided mod made by Hubik.
==Construction==

===Parts needed===

List from the video below
* x1 Refined Liner (Body)
* x2 [[Pentel Energel]] (Body and front part)
* x2 [[Pilot Dr. Grip|Pilot Dr. Grip Play Balance]] (2 Outer Grips)

====Additional Items====
* 9cm insert

===Text tutorial===
====Preparation====
# Cut both [[Pentel Energel]] body to 5.6cm
# Cut both [[Pentel Energel]] front part to 2.6cm (from the screw part)

====Assembly====
# Add an insert to the Refined Liner.
# Add the Pilot Dr. Grip Play Balance grip to the Energel body.
# Screw the Energel body onto its front part.
# Put the rest of the Energel front part inside the Refined liner.
# Repeat.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=Va-8FEjGzxE</youtube>

Video tutorial by Hubik.

==References==

[[Category:Pen Mods]]

Zero-EX mod

2025-03-25T16:07:49Z

Probunga:

{{Mod Infobox
|name=
|image={{#setmainimage:Zeroexmod.jpg}}
|creator= Hubik
|style= [[Double Sided]]
|length= 22.5cm
|weight= 17g
|cog= cop
}}
The '''Zero-EX mod''' is a double sided mod made by Hubik.
==Construction==

===Parts needed===

List from the video below
* x1 Refined Liner (Body)
* x2 [[Pentel Energel]] (Body and front part)
* x2 [[Pilot Dr. Grip|Pilot Dr. Grip Play Balance]] (2 Outer Grips)

====Additional Items====
* An insert

===Text tutorial===
====Preparation====
# Cut both [[Pentel Energel]] body to 5.6cm
# Cut both [[Pentel Energel]] front part to 2.6cm (from the screw part)

====Assembly====
# Add an insert to the Refined Liner.
# Add the Pilot Dr. Grip Play Balance grip to the Energel body.
# Screw the Energel body onto its front part.
# Put the rest of the Energel front part inside the Refined liner.
# Repeat.

===Video tutorial===
<youtube>https://www.youtube.com/watch?v=Va-8FEjGzxE</youtube>

Video tutorial by Hubik.

==References==

[[Category:Pen Mods]]

White Stick V2

2025-01-01T15:15:05Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by '''[[ProBloodBag]]'''. The mod was made with a focus on minimalism in appearance and structure. Aside from the '''[[Tru Red Gripped Ballpoint Stick Pen]]''', all parts are relatively obtainable internationally, and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the '''[[Pilot Opt Shaker]]'''.

Cutting the silicone tubes has consistency issues due to curvature caused by the manufacturing process. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Images coming soon. (hopefully)

==Construction==

===Tutorial===
https://youtu.be/Vl1JAtD8r8A?si=yU4VRmbvy_xT_0sl

===Parts needed===
* 3x [[Acrylic Paint Markers]] (barrel)
**Many duplicate subs, ensure 8.5cm length and 12mm OD
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-12-23T19:37:26Z

Probunga: /* Parts needed */

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by '''[[ProBloodBag]]'''. The mod was made with a focus on minimalism in appearance and structure. Aside from the '''[[Tru Red Gripped Ballpoint Stick Pen]]''', all parts are relatively obtainable internationally, and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the '''[[Pilot Opt Shaker]]'''.

Cutting the silicone tubes has consistency issues due to curvature caused by the manufacturing process. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Images coming soon. (hopefully)

==Construction==

===Tutorial===
https://youtu.be/Vl1JAtD8r8A?si=yU4VRmbvy_xT_0sl

===Parts needed===
* 2x [[Acrylic Paint Markers]] (barrel)
**Many duplicate subs, ensure 8.5cm length and 12mm OD
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-12-23T19:35:38Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by '''[[ProBloodBag]]'''. The mod was made with a focus on minimalism in appearance and structure. Aside from the '''[[Tru Red Gripped Ballpoint Stick Pen]]''', all parts are relatively obtainable internationally, and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the '''[[Pilot Opt Shaker]]'''.

Cutting the silicone tubes has consistency issues due to curvature caused by the manufacturing process. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Images coming soon. (hopefully)

==Construction==

===Tutorial===
https://youtu.be/Vl1JAtD8r8A?si=yU4VRmbvy_xT_0sl

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T15:26:42Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by '''[[ProBloodBag]]'''. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the '''[[Tru Red Gripped Ballpoint Stick Pen]]''', all parts can be obtained from '''AliExpress''', and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the '''[[Pilot Opt Shaker]]'''.

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the '''[[Pilot Opt Shaker]]''' sub-body for the caps and '''[[M&G Acrylic Paint Markers]]''' barrel for the middle segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the '''[[Tru Red Gripped Ballpoint Stick Pen]]''' grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

File:Sumikkoopt.webp

2024-07-30T00:56:06Z

Probunga:

Pilot Opt Shaker

2024-07-30T00:51:58Z

Probunga:

The '''[[Pilot Opt Shaker]]''' is the mechanical pencil twin to the '''[[Pilot Opt Ballpoint Pen]]'''. Its shaker mechanism is powered by a heavy coiled spring. It differs from the ballpoint pen by its heavier tip with fixed protruding lead protective sleeve, back clicker with covered eraser, and single piece sub-body with slightly thicker plastic.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used in the '''[[White Stick V2]]''' as an internal cap. The spring shaker does not have good modding viability due to difficulties with cutting and cutting precision; the '''[[Pilot Dr. Grip]]''' shaker tube does not share these qualities.

The Pilot Opt in both variations has also been collaboratively licensed a number of times which has provided new grip colors as well as decorative shells.

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

Pilot Opt Shaker

2024-07-30T00:51:44Z

Probunga:

The '''[[Pilot Opt Shaker]]''' is the mechanical pencil twin to the '''[[Pilot Opt Ballpoint Pen]]'''. Its shaker mechanism is powered by a heavy coiled spring. It differs from the ballpoint pen by its heavier tip with fixed protruding lead protective sleeve, back clicker with covered eraser, and single piece sub-body with slightly thicker plastic.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used in the '''[[White Stick V2]]''' as an internal cap. The spring shaker does not have good modding viability due to difficulties with cutting and cutting precision; the [[Pilot Dr. Grip]] shaker tube does not share these qualities.

The Pilot Opt in both variations has also been collaboratively licensed a number of times which has provided new grip colors as well as decorative shells.

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

Pilot Opt Shaker

2024-07-30T00:51:33Z

Probunga:

The '''[[Pilot Opt Shaker]]''' is the mechanical pencil twin to the '''[[Pilot Opt Ballpoint Pen]]'''. Its shaker mechanism is powered by a heavy coiled spring. It differs from the ballpoint pen by its heavier tip with fixed protruding lead protective sleeve, back clicker with covered eraser, and single piece sub-body with slightly thicker plastic.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used in the '''[[White Stick V2]]''' as an internal cap. The spring shaker does not have good modding viability due to difficulties with cutting and cutting precision; the [[Pilot Dr. Grip]] shaker tube does not suffer from these downsides.

The Pilot Opt in both variations has also been collaboratively licensed a number of times which has provided new grip colors as well as decorative shells.

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

Pilot Opt Shaker

2024-07-30T00:47:55Z

Probunga:

The '''[[Pilot Opt Shaker]]''' is the mechanical pencil twin to the '''[[Pilot Opt Ballpoint Pen]]'''. Its shaker mechanism is powered by a heavy coiled spring. It differs from the ballpoint pen by its heavier tip with fixed protruding lead protective sleeve, back clicker with covered eraser, and single piece sub-body with slightly thicker plastic.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used in the '''[[White Stick V2]]''' as an internal cap.

The Pilot Opt in both variations has also been collaboratively licensed a number of times which has provided new grip colors as well as decorative shells.

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

Pilot Opt Shaker

2024-07-30T00:47:12Z

Probunga:

The '''[[Pilot Opt Shaker]]''' is the mechanical pencil twin to the '''[[Pilot Opt Ballpoint Pen]]'''. Its shaker mechanism is powered by a heavy coiled spring. It differs from the ballpoint pen by its heavier tip with fixed protruding lead protective sleeve, back clicker with covered eraser, and single piece plastic sub-body.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used in the '''[[White Stick V2]]''' as an internal cap.

The Pilot Opt in both variations has also been collaboratively licensed a number of times which has provided new grip colors as well as decorative shells.

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

Pilot Opt Ballpoint Pen

2024-07-30T00:47:01Z

Probunga:

The '''[[Pilot Opt Ballpoint Pen]]''' is the ballpoint pen twin to the '''[[Pilot Opt Shaker]]'''. Its inner mechanism is no different than standard ballpoint pens. It differs from the shaker by its lighter tip with no additional protruding tip, back clicker with standard ballpoint pen cam mechanism, and two piece sub-body with threading between grip and decorative shell.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used to create threaded removeable caps in niche cases. (link to x/twitter soon)

The Pilot Opt in both variations has also been collaboratively licensed a number of times which has provided new grip colors as well as decorative shells.

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

White Stick V2

2024-07-30T00:43:00Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by '''[[ProBloodBag]]'''. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the '''[[Tru Red Gripped Ballpoint Stick Pen]]''', all parts can be obtained from '''AliExpress''', and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the '''[[Pilot Opt Shaker]]'''.

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the '''[[Pilot Opt Shaker]]''' sub-body caps and '''[[M&G Acrylic Paint Markers]]''' middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the '''[[Tru Red Gripped Ballpoint Stick Pen]]''' grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:42:02Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by '''[[ProBloodBag]]'''. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the '''[[Tru Red Gripped Ballpoint Stick Pen]]''', all parts can be obtained from '''AliExpress''', and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the '''[[Pilot Opt Shaker]]'''.

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the '''[[Tru Red Gripped Ballpoint Stick Pen]]''' grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:41:05Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by [[ProBloodBag]]. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the [[Tru Red Gripped Ballpoint Stick Pen]], all parts can be obtained from '''AliExpress''', and the mod can be made for ~$10 USD at scale with most of the cost being attributed to the [[Pilot Opt Shaker]].

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:40:28Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of an aptly named mod made by [[ProBloodBag]]. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the [[Tru Red Gripped Ballpoint Stick Pen]], all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the [[Pilot Opt Shaker]].

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:39:06Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''[[White Stick V2]]''' is the second iteration of the White Stick mod made by [[ProBloodBag]]. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the [[Tru Red Gripped Ballpoint Stick Pen]], all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the [[Pilot Opt Shaker]].

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:38:38Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''White Stick V2''' is the second iteration of the White Stick mod made by [[ProBloodBag]]. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the [[Tru Red Gripped Ballpoint Stick Pen]], all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the [[Pilot Opt Shaker]].

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:38:16Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''White Stick V2''' is the second iteration of the White Stick mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the [[Tru Red Gripped Ballpoint Stick Pen]], all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the [[Pilot Opt Shaker]].

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:36:53Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''White Stick V2''' is the second iteration of the White Stick mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the Tru Red pen, all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the Pilot Opt pencils.

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Tutorial + Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

Pilot Opt Ballpoint Pen

2024-07-30T00:34:44Z

Probunga: Created page with "The '''Pilot Opt Ballpoint Pen''' is the ballpoint pen twin to the '''Pilot Opt Shaker'''. Its inner mechanism is no different than standard ballpoint pens. It differs from the shaker by its lighter tip with no additional protruding tip, back clicker with standard ballpoint pen cam mechanism, and two piece sub-body with threading between grip and decorative shell. It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has..."

The '''[[Pilot Opt Ballpoint Pen]]''' is the ballpoint pen twin to the '''[[Pilot Opt Shaker]]'''. Its inner mechanism is no different than standard ballpoint pens. It differs from the shaker by its lighter tip with no additional protruding tip, back clicker with standard ballpoint pen cam mechanism, and two piece sub-body with threading between grip and decorative shell.

It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used to create threaded removeable caps in niche cases. (link to x/twitter soon)

Pictures coming soon. (hopefully)

[[Category: Pens for Modding]]

Pilot Opt Shaker

2024-07-30T00:29:17Z

Probunga: Created page with "The '''Pilot Opt Shaker''' is the mechanical pencil twin to the '''Pilot Opt Ballpoint Pen'''. Its shaker mechanism is powered by a heavy coiled spring. It differs from the ballpoint pen by its heavier tip with fixed protruding lead protective sleeve, back clicker with covered eraser, and single piece plastic sub-body. It is usually used for its metal tip, grip, and decorative outer shell, however, the sub-body has been used in the '''White Stick V2''' as a..."

White Stick V2

2024-07-30T00:14:03Z

Probunga:

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''White Stick V2''' is the second iteration of the White Stick mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the Tru Red pen, all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the Pilot Opt pencils.

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x [[M&G Acrylic Paint Markers]] (barrel)
* 2x [[Pilot Opt Shaker]] (tip / sub-body)
* 1x [[Tru Red Gripped Ballpoint Stick Pen]] (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]

White Stick V2

2024-07-30T00:08:54Z

Probunga: Created page with "{{Mod Infobox |name=White Stick V2 |image= |creator= ProBloodBag |style= Double Sided |length= 24.5cm |weight= ~21.7g |cog=COP }} The '''White Stick V2''' is the second iteration of the White Stick mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the Tru Red pen, all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale..."

{{Mod Infobox
|name=White Stick V2
|image=
|creator= ProBloodBag
|style= [[Double Sided]]
|length= 24.5cm
|weight= ~21.7g
|cog=COP
}}
The '''White Stick V2''' is the second iteration of the White Stick mod made by ProBloodBag. The mod was made with a focus on minimalism in appearance and structure, as well as having a good price to performance ratio. Aside from the Tru Red pen, all parts can be obtained from AliExpress, and the mod can be made for around $10 USD at scale with most of the cost being attributed to the Pilot Opt pencils.

The build process isn't difficult but can be made easier with a pipe cutter. Sanding is always recommended, especially for the caps and middle barrel segment which will affect weight and length respectively. The hardest part of making the mod is cutting the silicone tube grips as close to 3cm as possible, however, having a great length of silicone tubing will give you more than enough tries. Depending on wear, the tips may begin to come loose over time, but this can be fixed with new silicone tube grips, or increasing the length of the Tru Red grip segment.

Images coming soon. (hopefully)

==Construction==

===Parts needed===
* 2x M&G Acrylic Paint Markers (barrel)
* 2x Pilot Opt Mechanical Pencil (tip / sub-body)
* 1x Tru Red Gripped Ballpoint Stick Pen (cap / grip)
** Not available in all countries, any 10mm OD piece for center connecter and thin grip (heatshrink) can be subbed in
* 2x (9mm ID x 12mm OD) Food Grade Silicone Tube

[[Category:Pen Mods]]