Fen Spinner Wiki - User contributions [en]

Mesi G3

2022-01-17T17:42:26Z

Fenzushi:

{{Mod Infobox
|name=Mesi G3
|image={{#setmainimage:mesi g3 v1.png}}
|creator= Mesi
|style= [[Single Sided]]
|length= ~19.5cm
|weight= ~14g
|cog=COP
}}

'''Mesi G3''' is a single-capped mod created around the early years of JEB V2 by [[Mesi]]. Over time there have been many improved variations that have been designed such as Mesi G3 v2 and v3 (and even a lighter version v4).

==Construction==
===Parts needed===

* 1x Plastic G3 (body + cap)
* 2x HyperJell (1x cap + 2x grips)
* 1x Signo DX (tip + Grip)
* 2x HGR (2x tips)
* 1x Anyball (grip)
* 1x RSVP (inktube)

===Video tutorial===
<youtube>https://youtu.be/UR67m6K-TSk</youtube>

Video tutorial by Mesi.

[[Category: Pen Mods]]

Mesi G3

2022-01-17T17:37:20Z

Fenzushi: Created page with "{{Mod Infobox |name=Mesi G3 |image={{#setmainimage:mesi g3 v1.png}} |creator= Mesi |style= Single Sided |length= ~19.5cm |weight= ~14g |cog=COP }} '''Mesi G3''' is a sing..."

Menowa* Mod

2022-01-17T16:56:09Z

Fenzushi:

{{Mod Infobox
|name=Menowa* Mod
|image={{#setmainimage:menowa mod oleg.png}}
|creator= Menowa*
|style= [[Double Sided]]
|length= 20cm
|weight= 20g
|cog=COP
}}
'''Menowa* Mod''' is a dense yet short mod created by [[Menowa*]] and popularized during his success, earning itself self a spot as one of the most iconic and popular double-sided mods.

==Construction==
===Parts needed===

* 2x [[Pilot Dr. Grip HDG-50R|Dr. Grip]] (tips)
* 4x [[Dong-a Anyball|Anyball]] (grips)
* 2x [[Pilot Airblanc|Airblanc]] (tips)
* 2x [[Keityo Sign Pen|KT]] (caps)
* 1x [[Bic Round Stic Grip]] (barrel)
* 2x [[Crayola Supertip|ST]] (Old ST -> thick version) (barrels)
* 1x [[Zebra Hyper Jell]] (grip)

* 2x [[Pilot G3]] (Rubber stopper from inside cap) --> Optional
* 2x [[Zebra Airfit]] (Metal rings) --> Optional
* 2x [[Muji Tect2way]] (4 silicon rings - clear) --> Optional
* 2x [[Zebra Tect2way]] (5 silicon rings - black) --> Optional

===Video tutorial===
<youtube>https://youtu.be/OWg-PRldNiU</youtube>

Video tutorial by VORE-TEX.

==References==

[[Category: Pen Mods]]

Menowa* Mod

2022-01-17T16:54:48Z

Fenzushi: Created page with "{{Mod Infobox |name=Menowa* Mod |image={{#setmainimage:menowa mod oleg.png}} |creator= Menowa* |style= Double Sided |length= 20cm |weight= 20g |cog=COP }} '''Menowa* Mod''..."

{{Mod Infobox
|name=Menowa* Mod
|image={{#setmainimage:menowa mod oleg.png}}
|creator= Menowa*
|style= [[Double Sided]]
|length= 20cm
|weight= 20g
|cog=COP
}}
'''Menowa* Mod''' is a dense yet short mod created by [[Menowa*]] and popularized during his success, earning itself self a spot as one of the most iconic and popular double-sided mods.

==Construction==
===Parts needed===

* 2 [[Pilot Dr. Grip HDG-50R|Dr. Grip]] (tips)
* 4 [[Dong-a Anyball|Anyball]] (grips)
* 2 [[Pilot Airblanc|Airblanc]] (tips)
* 2 [[Keityo Sign Pen|KT]] (caps)
* 1 [[Bic Round Stic Grip]] (barrel)
* 2 [[Crayola Supertip|ST]] (Old ST -> thick version) (barrels)
* 1 [[Zebra Hyper Jell]] (grip)

* 2 [[Pilot G3]] (Rubber stopper from inside cap) --> Optional
* 2 [[Zebra Airfit]] (Metal rings) --> Optional
* 2 [[Muji Tect2way]] (4 silicon rings - clear) --> Optional
* 2 [[Zebra Tect2way]] (5 silicon rings - black) --> Optional

===Video tutorial===
<youtube>https://youtu.be/OWg-PRldNiU</youtube>

Video tutorial by VORE-TEX.

==References==

[[Category: Pen Mods]]

File:Menowa mod oleg.png

2022-01-17T16:16:03Z

Fenzushi:

A picture of Menowa* Mod from psershop.

Kagami DC

2022-01-13T14:42:54Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|image={{#setmainimage:Kagami_DC.png}}
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

'''Kagami DC''' is a mod created and popularized by [[Kagami]], but despite its asymmetric design is still known as a double sided mod.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

Tutorial assembled from Kagami's YouTube Video Tutorial (Below) and [[VORE-TEX]]'s blog<ref>https://penmodding.pm/archives/5843</ref>.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami Kirishima.

[[Category: Pen Mods]]

Kagami DC

2022-01-13T14:42:28Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|image={{#setmainimage:Kagami_DC.png}}
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

'''Kagami DC''' is a mod created and popularized by [[Kagami]], but despite its asymmetric design is still known as a double sidded mod.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

Tutorial assembled from Kagami's YouTube Video Tutorial (Below) and [[VORE-TEX]]'s blog<ref>https://penmodding.pm/archives/5843</ref>.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami Kirishima.

[[Category: Pen Mods]]

Kagami DC

2022-01-13T14:32:08Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|image={{#setmainimage:Kagami_DC.png}}
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

'''Kagami DC''' is a mod created and popularized by [[Kagami]], but despite its asymmetric design is still known as a double capped mod.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

Tutorial assembled from Kagami's YouTube Video Tutorial (Below) and [[VORE-TEX]]'s blog<ref>https://penmodding.pm/archives/5843</ref>.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami Kirishima.

[[Category: Pen Mods]]

Kagami DC

2022-01-13T11:58:33Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|image={{#setmainimage:Kagami_DC.png}}
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

Regardless of its asymmetric design, '''Kagami DC''' is a balanced mod created by [[Kagami]] that has been popularized due to its unique design yet spinning potential.

Some think of Kagami DC as a mod that was created using spare parts.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

Tutorial assembled from Kagami's YouTube Video Tutorial (Below) and [[VORE-TEX]]'s blog<ref>https://penmodding.pm/archives/5470</ref>.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami Kirishima.

[[Category: Pen Mods]]

Kagami DC

2022-01-13T11:42:16Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|image={{#setmainimage:Kagami_DC.png}}
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

Regardless of its asymmetric design, '''Kagami DC''' is a balanced mod created by [[Kagami]] that has been popularized due to its unique design yet spinning potential.

Some think of Kagami DC as a mod that was created using spare parts.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami himself.

[[Category: Pen Mods]]

File:Kagami DC.png

2022-01-13T11:22:58Z

Fenzushi:

An image of Kagami DC from Kagami's tutorial on the mod.
Video published October 4th, 2016
https://youtu.be/pQP_cFYoZqg

Kagami DC

2022-01-13T10:24:44Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

Regardless of its asymmetric design, '''Kagami DC''' is a balanced mod created by [[Kagami]] that has been popularized due to its unique design yet spinning potential.

Some think of Kagami DC as a mod that was created using spare parts.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami himself.

[[Category: Pen Mods]]

Kagami DC

2022-01-13T10:24:25Z

Fenzushi:

{{Mod Infobox
|name=Kagami DC
|image=[[File:Kagami DC|thumb]]
|creator= Kagami
|style= [[Double Sided]]
|length= 21cm
|weight= ~14.5g
|cog=COP
}}

Regardless of its asymmetric design, '''Kagami DC''' is a balanced mod created by [[Kagami]] that has been popularized due to its unique design yet spinning potential.

Some think of Kagami DC as a mod that was created using spare parts.

==Construction==
===Parts needed===

* 1x [[Pentel Art Color Twin]]
* 1x [[Pentel Color Twin]]
* 2x [[Zebra Sarasa]]（grip）
* 1x [[Pilot Supergrip]]（grip - you only need the rings section）
* 1x [[Dong-a Anyball]]（grip）
* 2x [[Pilot Vega Gel]]（tip）

===Text tutorial===
# Disassemble the Pentel Art Color Twin fully leaving only the body.
# Remove the inside of both the large Color Twin cap and the Art Color cap.
# Cut down both the smaller caps until they are the same length as the Art Color backplug.
# Tightly fit the smaller Art Color cap on the back of the Art Color body and the smaller Color Twin cap on front.
# Cut each of the Zebra Sarasa grips down to 2 cm.
# Cut 1 section of 2 rings of Dong-a Anyball.
# Cut 2 sections of 1 ring of Pilot Supergrip.
# Place the Dong-a Anyball section on the smaller Color Twin cap.
# Unscrew the tips from the Pilot Vega Gel and place them in both the larger caps.
# Place each of the Supergrip rings into one Sarasa grip, then place one on the end of each larger cap.
# Place the larger caps on the two ends of the body.

===Video tutorial===
<youtube>https://youtu.be/pQP_cFYoZqg</youtube>

Video tutorial by Kagami himself.

[[Category: Pen Mods]]

Kagami DC

2022-01-13T10:11:14Z

Fenzushi: Created page with "{{Mod Infobox |name=Kagami DC |creator= Kagami |style= Double Sided |length= 21cm |weight= ~14.5g |cog=COP }} Regardless of its asymmetric design, '''Kagami DC''' is a ba..."

File:Kagami DC.png

2022-01-13T09:01:40Z

Fenzushi:

Literally Kagami DC

Bictory

2022-01-13T05:38:54Z

Fenzushi:

{{Mod Infobox
|name=
|image={{#setmainimage:bictory.jpg}}
|creator= Mwahaha91
|style= [[Double Sided]]
|length= 17.3cm
|weight=7.62g (without tips/grips)
|cog=
}}
The '''Bictory''' is a Double Sided mod made by [[Mwahaha91]] in 2006.<ref>https://penspinning.wordpress.com/pen-modification/pens/bictory-by-mwahaha91/</ref><ref> [https://www.tapatalk.com/groups/ucpsb/bictory-by-mwahaha91-t2528.html Thread quoting the original bictory tutorial on UCPSB]</ref> It has been popular over the years due to the wide availability of the required [[Bic Round Stic|Round Stic]] pens used in its construction, and is often recommended to beginners.

The mod is initially very light, but can be made heavier by adding grips and tips to the caps.

==Construction==

===Parts needed===
* 2x Round Stic
* (Optional) Grips
* (Optional) Tips

===Text tutorial===
# Remove the backplug from one of the Round Stic barrels.
# Remove the frontplug with ink from the other Round Stic.
# Place the frontplug where the backplug was on the first Round Stic. This may require cutting the inktubes down to fit.
# Cut the clips off the bic caps.
# Place caps on either side of the mod.
# (Optional) Tape tips on the caps.
# (Optional) Place grips over the caps/optional tips.

==References==
<references />
[[Category: Pen Mods]]

Bictory

2022-01-12T06:26:18Z

Fenzushi: /* Parts needed */

{{Mod Infobox
|name=
|image={{#setmainimage:bictory.jpg}}
|creator= Mwahaha91
|style= [[Double Sided]]
|length= 17.3cm
|weight=7.62g (without tips/grips)
|cog=
}}
The '''Bictory''' is a Double Sided mod made by [[Mwahaha91]] in 2006.<ref>https://penspinning.wordpress.com/pen-modification/pens/bictory-by-mwahaha91/</ref><ref> [https://www.tapatalk.com/groups/ucpsb/bictory-by-mwahaha91-t2528.html Thread quoting the original bictory tutorial on UCPSB]</ref> It has been popular over the years due to the wide availability of the required [[Bic Round Stic|Round Stic]] pens used in its construction, and is often recommended to beginners.

The mod is initially very light, but can be made heavier by adding grips and tips to the caps.

==Construction==

===Parts needed===
* 2x Round Stic (Round Stic Exact works too)
* (Optional) Grips
* (Optional) Tips

===Text tutorial===
# Remove the backplug from one of the Round Stic barrels.
# Remove the frontplug with ink from the other Round Stic.
# Place the frontplug where the backplug was on the first Round Stic. This may require cutting the inktubes down to fit.
# Cut the clips off the bic caps.
# Place caps on either side of the mod.
# (Optional) Tape tips on the caps.
# (Optional) Place grips over the caps/optional tips.

==References==
<references />
[[Category: Pen Mods]]