Fen Spinner Wiki - User contributions [en]

Dentoru Emboss

2021-05-02T20:10:47Z

Cumlover2008: Created page with "{{Mod Infobox |name= |image={{#setmainimage:dentoru_emboss7.jpg}} |creator= Dentoru |style= Double Sided |length= Unknown |weight= Unknown |cog=COP }} '''Dentoru Emboss'''..."

{{Mod Infobox
|name=
|image={{#setmainimage:dentoru_emboss7.jpg}}
|creator= Dentoru
|style= [[Double Sided]]
|length= Unknown
|weight= Unknown
|cog=COP
}}
'''Dentoru Emboss''' is an adjustable mod made by Dentoru. It emulates the look and spinning feel of Menowa's Remei mod but on an Emboss body.

==Construction==
===Parts needed===
* 1x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Body, backplug)
* 2x [[Giotto Turbo Max]] (Two bodies)
* 2x [[2ballpen+sharpen]] or can be subbed with [[Zebra Z-Grip]] (Two grips)
* 4x [[Anyball]] (Two grips)
* 2x [[Playcolor 2]] (Two small caps)
* 2x [[Pilot G2]] (Two grips)
* 1x [[Penzgear]] (2/4/6 Rings)
* 1x [[Pentel Hybrid Gel Grip]] or [[Pentel RSVP]] or similar (Thin grip).
* Tape (Original uses cellophane tape)

===Text tutorial===

# Cut 7 ring section from the back of two Anyball grips (4-'''7''')
# Cut 4 ring section, two rings away from the front of two Anyball grips (2-'''4'''-5)
# Cut 4 rings off the G2 grips, keep the large part
# Cut 3cm of the Giotto barrels from the back end
# Cut two 3mm sections from your thin grip
# Cut two 3cm sections from the smooth part of the 2ballpen+sharpen grips
# Clean and empty Emboss
# Put the backplug back into the Emboss [[File:Dentoru emboss1.jpg|250px|thumb|left]] 
# Place a thin grip section on the front of a PC2 small cap [[File:dentoru_emboss2.jpg|250px|thumb|left]] 
# Put the G2 grip, cut-side first, onto the front of the PC2 cap leaving 1cm of the cap exposed [[File:dentoru_emboss3.jpg|250px|thumb|left]] 
# Push 1-3 penzgear rings into the G2 grip [[File:dentoru_emboss4.jpg|250px|thumb|left]] 
# Place the package into the Giotto barrel from the back end [[File:dentoru_emboss5.jpg|250px|thumb|left]] 
# Put 7 section Anyball, 4 section Anyball, and 2ballpen+sharpen section onto the package [[File:dentoru_emboss6.jpg|250px|thumb|left]] 
# Repeat steps 9-13 to make a second package
# Wrap tape around the Emboss front and backplug until the packages fit onto the ends snugly
# Push the packages onto the Emboss [[File:dentoru_emboss7.jpg|250px|thumb|left]] 

[[Category:Pen Mods]]

File:Dentoru emboss7.jpg

2021-05-02T19:58:27Z

Cumlover2008:

File:Dentoru emboss6.jpg

2021-05-02T19:58:12Z

Cumlover2008:

File:Dentoru emboss5.jpg

2021-05-02T19:57:57Z

Cumlover2008:

File:Dentoru emboss4.jpg

2021-05-02T19:57:39Z

Cumlover2008:

File:Dentoru emboss3.jpg

2021-05-02T19:55:01Z

Cumlover2008:

File:Dentoru emboss2.jpg

2021-05-02T19:52:32Z

Cumlover2008:

File:Dentoru emboss1.jpg

2021-05-02T19:51:20Z

Cumlover2008:

User:Cumlover2008/dentoru emboss

2021-05-02T19:50:44Z

Cumlover2008: Created page with "{{Mod Infobox |name= |image={{#setmainimage:placeholder.jpg}} |creator= Dentoru |style= Double Sided |length= Unknown |weight= Unknown |cog=COP }}description placeholder..."

{{Mod Infobox
|name=
|image={{#setmainimage:placeholder.jpg}}
|creator= Dentoru
|style= [[Double Sided]]
|length= Unknown
|weight= Unknown
|cog=COP
}}description placeholder

==Construction==
===Parts needed===
* 1x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Body, backplug)
* 2x [[Giotto Turbo Max]] (Two bodies)
* 2x [[2ballpen+sharpen]] (Two grips)
* 4x [[Anyball]] (Two grips)
* 2x [[Playcolor 2]] (Two small caps)
* 2x [[Pilot G2]] (Two grips)
* 1x [[Penzgear]] (2/4/6 Rings)
* 1x [[Pentel Hybrid Gel Grip]] or [[Pentel RSVP]] or similar (Thin grip).
* Electrical Tape

===Text tutorial===

# Cut 7 ring section from the back of two Anyball grips (4-'''7''')
# Cut 4 ring section, two rings away from the front of two Anyball grips (2-'''4'''-5)
# Cut 4 rings off the G2 grips, keep the large part
# Cut 3cm of the Giotto barrels from the back end
# Cut two 3mm sections from your thin grip
# Cut two 3cm sections from the smooth part of the 2ballpen+sharpen grips
# Clean and empty Emboss
# Put the backplug back into the Emboss
# Place a thin grip section on the front of a PC2 small cap
# Put the G2 grip, cut-side first, onto the PC2 cap leaving 1cm of the cap exposed
# Push 1-3 penzgear rings into the G2 grip
# Place the package into the Giotto barrel from the back end
# Put 7 section Anyball, 4 section Anyball, and 2ballpen+sharpen section onto the package
# Repeat steps 9-13 to make a second package
# Wrap tape around the Emboss front and backplug until the packages fit onto the ends snugly
# Push the packages onto the Emboss

MeowSTA

2021-02-11T00:28:09Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:Meowsta_thumbnail.jpg}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy mod for slow spinning which is slightly thinner than Emboss.

Xeran changed the name from FenSTA to MeowSTA on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot Supergrip]] (Two grips)
* 1x [[Pilot G2]] (Grip)
* 2x [[Pilot Airblanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Marker |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the tip should sit flush with the grip [[File:Meowsta_step10.jpg|left|thumb|200px]] 
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G2 ring into the small Emboss cap [[File:Meowsta_step13.jpg|left|thumb|200px]] 
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put Airblanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel [[File:Meowsta_step17.jpg|left|thumb|200px]] 
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-11T00:27:46Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:Meowsta_thumbnail.jpg}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy mod for slow spinning which is slightly thinner than Emboss.

Xeran changed the name from FenSTA to MeowSTA on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot Supergrip]] (Two grips)
* 1x [[Pilot G2]] (Grip)
* 2x [[Pilot Airblanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the tip should sit flush with the grip [[File:Meowsta_step10.jpg|left|thumb|200px]] 
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G2 ring into the small Emboss cap [[File:Meowsta_step13.jpg|left|thumb|200px]] 
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put Airblanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel [[File:Meowsta_step17.jpg|left|thumb|200px]] 
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-11T00:23:40Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:Meowsta_thumbnail.jpg}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy mod for slow spinning which is slightly thinner than Emboss.

Xeran changed the name from FenSTA to MeowSTA on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the tip should sit flush with the grip [[File:Meowsta_step10.jpg|left|thumb|200px]] 
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G2 ring into the small Emboss cap [[File:Meowsta_step13.jpg|left|thumb|200px]] 
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel [[File:Meowsta_step17.jpg|left|thumb|200px]] 
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

User:Cumlover2008

2021-02-11T00:21:34Z

Cumlover2008: bruh monk

bruh monkey productions

favorite coler is :3

MeowSTA

2021-02-11T00:20:24Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:Meowsta_thumbnail.jpg}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy mod for slow spinning which is slightly thinner than Emboss.

Xeran changed the name from FenSTA to MeowSTA on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G-2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G-2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the tip should sit flush with the grip [[File:Meowsta_step10.jpg|left|thumb|200px]] 
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G-2 ring into the small Emboss cap [[File:Meowsta_step13.jpg|left|thumb|200px]] 
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel [[File:Meowsta_step17.jpg|left|thumb|200px]] 
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

File:Meowsta thumbnail.jpg

2021-02-11T00:18:41Z

Cumlover2008: MeowSTA thumbnail for info box

== Summary ==
MeowSTA thumbnail for info box

File:Meowsta step17.jpg

2021-02-11T00:13:52Z

Cumlover2008: Photo for step 17 of MeowSTA tutorial

== Summary ==
Photo for step 17 of MeowSTA tutorial

File:Meowsta step13.jpg

2021-02-11T00:12:17Z

Cumlover2008: Photo for step 13 of MeowSTA tutorial

== Summary ==
Photo for step 13 of MeowSTA tutorial

File:Meowsta step10.jpg

2021-02-11T00:07:01Z

Cumlover2008: Photo for step 10 of MeowSTA tutorial

== Summary ==
Photo for step 10 of MeowSTA tutorial

MeowSTA

2021-02-11T00:04:04Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy, slow moving mod. It's Xeran's main mod.

Xeran changed the name from FenSTA to MeowSTA after V01d's recommendation on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G-2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G-2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the tip should sit flush with the grip
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G-2 ring into the small Emboss cap
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-10T23:50:11Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy, slow moving mod. It's Xeran's main mod.

Xeran changed the name from FenSTA to MeowSTA after V01d's recommendation on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G-2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G-2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the tip should sit flush with the grip and end of the cap
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G-2 ring into the small Emboss cap
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-10T23:47:26Z

Cumlover2008:

MeowSTA

2021-02-10T23:42:19Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy, slow moving mod. It's Xeran's main mod.

Xeran changed the name from FenSTA to MeowSTA after V01d's recommendation on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G-2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G-2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the grip and tip should sit flush with end of the cap
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G-2 ring into the small Emboss cap
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-10T23:41:58Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy, slow moving mod. It's Xeran's main mod.
Xeran changed the name from FenSTA to MeowSTA after V01d's recommendation on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G-2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G-2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the grip and tip should sit flush with end of the cap
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G-2 ring into the small Emboss cap
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-10T23:28:37Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
MeowSTA intends to be a heavy, slow moving mod to fit Xeran's preferences and style. It has been Xeran's main mod as of 27/08/2020 to now.

The mod has gone through 3 versions of weight package construction with the final version to be called MeowSTA being created on 20/09/2020.
There has been 4 name changes since the first creation of the mod; Originally the mod was called FenSTA but was changed shortly after to Fengear as it predated V01d's Fengear mod and Xeran wanted to own the mod name as a joke towards V01d.
It began to be referred to as the Catgear by the creator and others as V01d's Fengear became more popular.
Xeran officially changed the name to MeowSTA after the recommendation from V01d on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 1x [[Pilot G-2]] (Grip)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text Tutorial===
# Empty and clean STA barrel with acetone/nail polish remover
# Take backplugs off the Tulip markers and remove the nibs
# Cut 1cm from the lip of the small Emboss caps
# Cut DGGs in half
# Cut 2 separate rings from the middle of the ridged section of the G-2 grip
# Cut 3 sections from the front of the Supergrips
# Cut 1cm from the back of the Airblancs
# Hollow the CT caps
# Push one of the cut Supergrip sections into the CT cap, cut side in
# Put an inverted Signo tip into the Supergrip grip, the grip and tip should sit flush with end of the cap
# Put inverted Opt tip onto the Signo tip
# Push one of the short Emboss cap section over the Opt tip, cut side out
# Put a G-2 ring into the small Emboss cap
# Put front half of DGG onto the Emboss and CT cap, small cap and g2 section should be flush with the inside of the DGG
# Put AirBlanc section onto front of Tulip backplug
# Push Tulip backplug into CT cap
# Wrap tape onto back of the Tulip backplug until it can fit snugly into the STA barrel
# Repeat steps 9-17 for the other cap
# Push assemblies onto STA barrel
# Complete

[[Category:Pen Mods]]

MeowSTA

2021-02-10T22:21:01Z

Cumlover2008:

MeowSTA

2021-02-10T22:13:04Z

Cumlover2008:

{{Mod Infobox
|name=
|image={{#setmainimage:}}
|creator= Xeran
|style= [[Double Sided]]
|length= 22.2cm
|weight= 24.9g
|cog=COP
}}The MeowSTA is an inverted mod made by Xeran as of 27/08/2020.
==History==
The mod has gone through 3 versions of weight package construction with the final version to be called MeowSTA being created on 20/09/2020.
There has been 4 name changes since the first creation of the mod; Originally the mod was called FenSTA but was changed shortly after to Fengear as it predated V01d's Fengear mod and the Xeran wanted to own the mod name as a joke towards V01d.
It began to be referred to as the Catgear by the creator and others as V01d's Fengear became more popular. Then Xeran officially changed the name to MeowSTA at the recommendation of V01d on 10/02/2020.

==Construction==
===Parts needed===
* 2x [[Tsukineko_Emboss_Dual_Pen| Emboss]] (Two small caps)
* 2x [[Pilot Opt Shaker]] (Two tips)
* 2x [[Signo |Uni-ball Signo]] (Two tips)
* 2x [[Pilot Dr. Grip |Pilot Dr. Grip Shaker]] (Two grips)
* 2x [[Pentel ColorTwin]] (Two caps)
* 2x [[Pilot SuperGrip]] (Two grips)
* 2x [[Pilot AirBlanc]] (Two grips)
* 1x [[STA Aquarelle]] (Barrel)
* 2x [[Tulip Dual-Tip Fabric Markers |Tulip Dual-Tip]] (Two backplugs)

===Other Materials===
* Masking Tape

===Text tutorial===

[[Category:Pen Mods]]

MeowSTA

2021-02-10T21:29:10Z

Cumlover2008:

placeholder

[[Category:Pen Mods]]

MeowSTA

2021-02-10T21:26:38Z

Cumlover2008: Created page with "placeholder"

placeholder